Abstract:A randomly excited spring–damper–mass system placed on a uniformly moving belt is investigated with the consideration of the Coulomb friction between the system and the belt. The system response is analytically studied. The physical essence of friction and the influences of the belt speed, the friction amplitude and the excitation intensity on the random responses are discussed in detail. The random response of the system is studied through the equivalent nonlinear system method. The influence of the friction between the mass block and the belt on the random response is approximated by dissipative and conservative components. The dissipative component is expressed by a linear damping and an energy-dependent nonlinear damping with undetermined coefficients while the conservative component is represented by an undetermined constant force and a restoring force with undetermined linear and cubic nonlinear stiffness coefficients. The undetermined coefficients are derived by minimizing the mean-square difference between the original system and the equivalent nonlinear system. The approximate analytical solutions are compared with the results by the Monte-Carlo simulation to validate the proposed procedure. The proposed procedure gives the formally analytical expression of stationary response probability density of spring–damper–mass–belt system. It is found that the proposed procedure is valid for small values of friction amplitude and is effective for a large range of excitation intensity. Contrary to physical intuition, the friction between block and moving belt can exhibit dissipative and conservative mechanisms simultaneously. Moreover, the dissipative and conservative mechanisms of friction compete with each other regarding the variation of belt speed. The friction amplitude and the excitation intensity also have noticeable effects on the distribution of dissipation and conversation of friction.

Random Response of Spring–Damper–Mass–Belt System with Coulomb Friction

Approximately Analytical Procedure to Evaluate Random Stick-Slip Vibration of Duffing System Including Dry Friction

Random Response Evaluation of Mono-Stable and Bi-Stable Duffing Systems with Dahl Friction

Approximately analytical technique for random response of LuGre friction system

Random response of vibro-impact systems with inelastic contact

Random vibration of viscoelastic system under broad-band excitations

Response Evaluation and Optimal Control for Stochastically Excited Vibro-Impact System with Hertzdamp Contact

Nonstationary Probability Densities of System Response of Strongly Nonlinear Single-Degree-of-freedom System Subject to Modulated White Noise Excitation

Deterministic and Random Response Evaluation of a Straight Beam with Nonlinear Boundary Conditions

Random vibration with inelastic impact: Equivalent nonlinearization technique

Incorporating Dissipated Impact into Random Vibration Analyses Through the Modified Hertzian Contact Model

Dynamics of a three-module vibration-driven system with non-symmetric Coulomb’s dry friction

Steady-State Dynamical Response of a Strongly Nonlinear System with Impact and Coulomb Friction Subjected to Gaussian White Noise Excitation

Response Of Multiple-Degree-Of-Freedom Flexible Structures To Random Excitation

Analyzing Resonant Response of a System with Dry Friction Damper Using an Analytical Method

Stochastic response analysis for nonlinear vibration systems with adjustable stiffness property under random excitation

Response Adjustability Analysis of Partial and Ordinary Differential Coupling System for Visco-Elastomer Sandwich Plate Coupled with Distributed Masses under Random Excitation via Spatial Periodicity Strategy

Response Characteristics of a Sandwich Plate with Visco-Elastomer Core and Periodically Supported Masses under Random Excitation

Belt-Drive Mechanics: Friction in the Absence of Sliding

Nonlinear behavior of disk spring with complex contact state

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading