Abstract:Abstract Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality ( M 2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

A High‐Efficiency All‐Fiber Laser Operated in High‐Order Mode Using Ring‐Core Yb‐Doped Fiber

Modeling Rare-Earth Doped Microfiber Ring Lasers

Low-threshold High-Efficiency All-Fiber Laser Generating Cylindrical Vector Beams Operated in LP11 Mode Throughout the Entire Cavity

An Injection-Locked Single-Longitudinal-Mode Fiber Ring Laser with Cylindrical Vector Beam Emission

Passively Q-switching Cylindrical Vector Beam Fiber Laser Operating in High-Order Mode

High-order Mode Direct Oscillation of Few-Mode Fiber Laser for High-Quality Cylindrical Vector Beams.

Stable Generation of Cylindrical Vector Beams with an All-Fiber Laser Using Polarization-Maintaining and Ring-Core Fibers.

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

An All-Fiber Laser Oscillating Directly at a Single TE01 Mode with Ring-Core Fibers

An all-fiber laser oscillating directly at single TE01 mode through ring-core fibers

Cylindrical Vector Pulse Generation from Mode-Locked Fiber Laser with Few-Mode Fiber Grating

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

Highly Efficient Rectangular Pulse Emission in a Mode-Locked Fiber Laser

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Intracavity cylindrical vector beam generation from all-PM Er-doped mode-locked fiber laser

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

A 6.4-kW peak power near-single-mode quasi-continuous wave fiber laser oscillator employing spindle-shaped ytterbium-doped fiber

1.75‐Kilowatt continuous‐wave output fiber laser using homemade ytterbium‐doped large‐core fiber

High-order mode Yb-doped fiber lasers based on mode-selective couplers.

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI