Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Strong and Tough Cellulose Nanofibrils Composite Films: Mechanism of Synergetic Effect of Hydrogen Bonds and Ionic Interactions

High aspect ratio cellulose nanofibrils with low crystallinity for strong and tough films

Simultaneous Reinforcement and Toughening of Carbon Nanotube/Cellulose Conductive Nanocomposite Films by Interfacial Hydrogen Bonding

Hydrogen Bond–induced Aqueous-Phase Surface Modification of Nanocellulose and Its Mechanically Strong Composites

Simultaneous Strengthening and Toughening Lignin/Cellulose Nanofibril Composite Films: Effects from Flexible Hydrogen Bonds

Contribution of Hemicellulose to Cellulose Nanofiber-Based Nanocomposite Films with Enhanced Strength, Flexibility and UV-blocking Properties

Eco-Friendly Bioinspired Interface Design for High-Performance Cellulose Nanofibril/Carbon Nanotube Nanocomposites

Transparent, Anisotropic Biofilm with Aligned Bacterial Cellulose Nanofibers

High-performance Cellulose Nanofibril Composite Films

Wood-inspired strategy to toughen transparent cellulose nanofibril films

Reinforcement of All-Cellulose Nanocomposite Films Using Native Cellulose Nanofibrils.

Polymer Films from Cellulose Nanofibrils—Effects from Interfibrillar Interphase on Mechanical Behavior

Self-assembled Optically Transparent Cellulose Nanofibril Films: Effect of Nanofibril Morphology and Drying Procedure

Effects of plant source selection and chemi-mechanical treatment on the fiber microstructures and mechanical behaviors of nanocellulose films

Novel Nanofibrillated Cellulose/Chitin Whisker Hybrid Nanocomposites and their Use for Mechanical Performance Enhancements

Preparation and characterization of sodium carboxymethyl cellulose/cotton linter cellulose nanofibril composite films

Upcycling Corn Straw into Nanocelluloses Via Enzyme-Assisted Homogenization: Application As Building Blocks for High-Performance Films

Super Strong All-Cellulose Composite Filaments by Combination of Inducing Nanofiber Formation and Adding Nanofibrillated Cellulose.

Nano-biocomposite Films Fabricated from Cellulose Fibers and Halloysite Nanotubes

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State