Abstract:The naturally lackadaisical kinetics of oxygen reduction reaction (ORR) in the cathode is one of the important factors that restrict the development of air-cathode microbial fuel cells (MFCs). In this work, the iron-nitrogen-carbon hierarchically nanostructured materials had been successfully fabricated by pyrolyzing glucose, iron chloride, and dicyandiamide with the aim of solving the issue. The obtained catalyst with an ultrathin nanostructure demonstrated an idiosyncratic electrocatalytic activity caused by the high content introduction of nitrogen and iron atoms, large surface area, which will offer sufficient active sites for improving the charge/mass transfer and reducing the diffusion resistance. Furthermore, with the increase of N dopant in the catalyst, better ORR catalytic activity could be achieved. Illustrating the N doping was beneficial to the ORR process. The high content of N, BET surface area caused by the N increasing could be responsible for the superior performance according to results of X-Ray photoelectron spectroscopy (XPS), Raman and Brunner-Emmet-Teller (BET) analysis. The ORR on the Fe–N3/C material follows 4e− pathway, and MFCs equipped with Fe–N3/C catalyst achieved a maximum power density (MPD) of 912 mW/m2, which was 1.1 times of the MPD generated by the commercial Pt/C (830 mW/m2). This research not only provided a feasible way for the fabrication of Pt-free catalyst towards oxygen reduction but also proposed potential cathode catalysts for the development of MFCs. Keywords: one-pot pyrolysis route, Fe−N-Doped carbon nanosheets, microbial fuel cells, iron-nitrogen co-doping, carbon based catalyst, electrochemical performance, cathode materials DOI: 10.25165/j.ijabe.20201306.5765 Citation: Sun Y, Zhang Z Z, Sun Y M, Yang G X. One-pot pyrolysis route to Fe−N-Doped carbon nanosheets with outstanding electrochemical performance as cathode materials for microbial fuel cell. Int J Agric & Biol Eng, 2020; 13(6): 207–214.

Facile Synthesis of Fe/N/S‐Doped Carbon Tubes As High‐Performance Cathode and Anode for Microbial Fuel Cells

Carbon nanotubes encapsulating FeS2 micropolyhedrons as an anode electrocatalyst for improving the power generation of microbial fuel cells

A facile synthesis of FeS/Fe3C nanoparticles highly dispersed on in situ grown N-doped CNTs as cathode electrocatalysts for microbial fuel cells

High-performance Anode Material Based on S and N Co-Doped Graphene/iron Carbide Nanocomposite for Microbial Fuel Cells

A facile synthesis of FeS/Fe 3 C nanoparticles highly dispersed on in situ grown N-doped CNTs as cathode electrocatalysts for microbial fuel cells

A facile synthesis of FeS/Fe<sub>3</sub>C nanoparticles highly dispersed on <i>in situ</i> grown N-doped CNTs as cathode electrocatalysts for microbial fuel cells

Carbon nanofiber/graphene hybrids anchoring Fe, N, S heteroatoms simultaneously enhancing extracellular electron transfer and biofilm adhesion in microbial fuel cells

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Iron-rich Nanoparticle Encapsulated, Nitrogen Doped Porous Carbon Materials As Efficient Cathode Electrocatalyst for Microbial Fuel Cells

Fe/N Codoped Paper Carbon Fiber Foam Promoted Extracellular Electron Transfer for a High-Performance Microbial Fuel Cell

3D Hierarchical Co8FeS8-FeCo2O4/N-CNTs@CF with an Enhanced Microorganisms-Anode Interface for Improving Microbial Fuel Cell Performance

Transition Metal (fe, Co, Ni) and Sulfur Codoped Nitrogen-Enriched Hydrothermal Carbon As High-Performance Cathode Catalyst for Microbial Fuel Cell

Facilely Prepared Carbon Dots as Effective Anode Modifier for Enhanced Performance of Microbial Fuel Cells

Heteroatom-doped porous carbon nanoparticle-decorated carbon cloth (HPCN/CC) as efficient anode electrode for microbial fuel cells (MFCs)

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells

Nitrogen-doped Carbon Nanofibers Anchoring Fe Nanoparticles As Biocompatible Anode for Boosting Extracellular Electron Transfer in Microbial Fuel Cells

Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell

Bifunctional electrode materials: Enhancing microbial fuel cell efficiency with 3D hierarchical porous Fe3O4/Fe-N-C structures

Nitrogen-doped Carbon Nanotubes/reduced Graphene Oxide Nanosheet Hybrids Towards Enhanced Cathodic Oxygen Reduction and Power Generation of Microbial Fuel Cells

One-pot Pyrolysis Route to Fe−N-Doped Carbon Nanosheets with Outstanding Electrochemical Performance As Cathode Materials for Microbial Fuel Cell

Preparation of Microvillus-Like Nitrogen-Doped Carbon Nanotubes As the Cathode of a Microbial Fuel Cell