Abstract:An upgrade program is proposed for the Delingha 13.7-m radio telescope to implement active surface for multi-beam observation at 3 mm wavelength. The upgrade involves three critical development aspects. One is the displacement actuator, which must fit the existing position, space and connections of the panels and backup structure, meanwhile, must be as compact and lightweighted as possible. The second is that a new sub-reflector is necessitated by the multi-beam observation, where a new hyperbolic surface figure is optimized. The third, more crucial and difficult, is to realize active control of the actuators and real-time closed-loop of the full active surface. This paper is to present the progress of the development work, test and experiments associated with the three areas. With one of the spare panels of the telescope, an experiment system is carried out with six sets of actuator and control electronics. Another experiment system of a novel laser-based closed-loop measurement concept is also conducted with four smaller dummy panels. Both experiment setups have output expected results and further experiments are going on with them. In this paper, based on the two experiments, we will describe the special design and test of the actuator, including the design of its special mounting and connecting mechanisms. The design and manufacture and measurement of the new hyperbolic sub-reflector will be detailed as well as the principle, simulation and realization of the laser-based measurement system. Besides, the control strategy of the large scale use of the hundreds of actuators and EMI suppression are also covered.

Surface Adjustment Strategy for a Large Radio Telescope with Adjustable Dual Reflectors

Light-tracing based surface deformation measurement strategy for large radio telescopes

Development Of Active Surface Technology Of Large Radio Telescope Antennas

Real-time Closed-loop Active Surface Technology of a Large Radio Telescope

Active Surface Compensation For Large Radio Telescope Antennas

The Experimental Study of Active Surface System for the Large-Aperture, High-Accuracy Radio Telescope

An Active Surface Upgrade For The Delingha 13.7-M Radio Telescope

Active Optimization Adjustment for the Surface Accuracy of Spaceborne SAR Antennas

Configuration Design of the Adjusting Parallel Mechanism for Sub-Reflector of Antenna of Radio Telescope Antenna

Design of Tipping Structure for 110 M High-Precision Radio Telescope

Calculation of the Best Fit Subreflector and Its Application in Eliminating the Harmless Error of Deformed Large Subreflectors

Active On-Orbit Surface Accuracy Adjustment for Spaceborne Antennas Based on Multi-Fidelity Adaptive Migration Learning Strategy

Surface Control of Large Deployable Membrane Diffraction Antenna

Compensation for Gravity Deformation Via Subreflector Motion of 65 M Shaped Cassegrain Antenna

Surface detection method for large active reflector antennas based on even-odd phase expansion

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

The measurement and modeling of gravitational deformation for large radio telescope based on wavefront perturbation method

Surface Control of Primary Mirror for Deployable Diffractive Telescope

A Study of the Fitting Accuracy of the Active Reflector for a Large Spherical Radio Telescope

Modeling and Analysis of the Active Surface System for the Large Single-Dish Sub-mm Telescope

Research on key technologies of giant radio telescope structure