Abstract:Hydrogen production by methane steam reforming (MSR) using the process heat from High-temperature gas-cooled reactor (HTGR) is one of the most promising technology for hydrogen production using nuclear energy in the near future. The permeation behavior of tritium produced by the reactor is extremely important when analyzing the safety of this hydrogen production system. There are two methods of connection between a nuclear reactor and a hydrogen production system. One is direct coupling that the steam reformer of the hydrogen production system is directly connected to the first circuit of the nuclear reactor. The other is indirect coupling via an intermediate heat exchanger (IHX) to connect nuclear reactor and hydrogen production system. Hence, this work proposed a model to analyze the difference in tritium permeation between these two coupling ways and to compare the tritium permeation behavior for different IHX alloys at various operating conditions. This model includes tritium's production rate, release fraction, and decay reduction in the system. The results show that the pre-exponential factor of the IHX alloy mainly limits the tritium permeation rate. In addition, the tritium permeation rate increases about two times when the temperature rises from 750 °C to 950 °C at a steady state. Further, the decrease of tritium permeation rate is seen from the calculation results for the system with IHX, e.g., for T = 750 °C, the mean permeation rate of tritium into the product gas is 9.31 × 10 −12 mol/s at the whole year for indirect coupling with an IHX, compared to 3.86 × 10 −12 mol/s for direct coupling, which reduced 58.54 % (This means that with IHX the permeation rate is lower than the system without IHX). These results will contribute to designing an effective and safe hydrogen production system by MSR using HTGR process heat.

Study on impact of Cr and Mo on diffusion of H in 2.25Cr1Mo steel using first-principle calculations

Electronic Property and Effective Diffusion Coefficient Calculation Model of Hydrogen Isotopes in Multicomponent Steel 2.25cr1mo from First-Principles Calculations

First-Principles Studies of Diffusion Behaviors of Tritium in HTR-PM Materials: from Framework to Preliminary Result

Diffusion of Hydrogen Isotopes in 3C-Sic in HTR-PM: A First-Principles Study

Thermal expansion, lattice vibration, and isotope effect on hydrogen diffusion in BCC Fe, Cr, and W from first-principles calculations

An investigation of hydrogen embrittlement of 12Cr2Mo1R(H) steel by slow strain rate tests and first-principles calculation

First-principle Studies of Radioactive Fission Productions Cs/Sr/Ag/I Adsorption on Chrome–molybdenum Steel in Chinese 200 MW HTR-PM

Diffusion Behaviors of Hydrogen Isotopes in Incoloy 800H: A First-Principles Study

A first principles study on H-atom interaction with bcc metals

First-principles Investigation on Diffusion and Permeation Behaviors of Hydrogen Isotopes in Molybdenum

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

First-principles Study on Dissolution and Diffusion Properties of Hydrogen in Molybdenum

Deuterium permeability and diffusivity in FeCrAl alloys for LWR cladding application

Effect of Cementite on the Hydrogen Diffusion/Trap Characteristics of 2.25Cr-1Mo-0.25V Steel with and without Annealing

Spin-polarized DFT calculations of elemental effects on hydrogen atom adsorption on FeCrAl (110) surface

Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25v Steel

Effect of Cementite on the Hydrogen Diffusion/Trap Characteristics of 2.25Cr-1Mo-0.25V Steel with and without Annealing.

First-Principles Study of Helium Trapping in Carbide Precipitates (cr23c6) in Ferritic-Martensitic Steels

Study on tritium permeation behavior in primary and second circuits of the hydrogen production system by methane steam reforming using HTGR

INVESTIGATION OF HYDROGEN DIFFUSION CHARACTERISTICS OF THE HEAT AFFECTED ZONE OF 2.25CR-1MO-0.25V STEEL BY AN ELECTROCHEMICAL PERMEATION METHOD

First-principles study on the dissolution and diffusion properties of hydrogen in α-Al2O3