Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Design and Synthesis of Carbon-Coated Α-Fe2o3@fe3o4 Heterostructured As Anode Materials for Lithium Ion Batteries

Green Fabrication of Sandwich-Like and Dodecahedral C@Fe3O4@C As High-Performance Anode for Lithium-Ion Batteries

Fe3O4/C Composites Synthesized from Fe-based Xerogels for Anode Materials of Li-ion Batteries

Facile Preparation and Electrochemical Properties of Carbon Coated Fe3O4 As Anode Material for Lithium-Ion Batteries

Design and Construction of Carbon‐Coated Fe3O4/Cr2O3 Heterostructures Nanoparticles as High‐Performance Anodes for Lithium Storage

3D Porous iron oxide/carbon with large surface area as advanced anode materials for lithium-ion batteries

Chemical Vapor Deposition Prepared Bi-Morphological Carbon-Coated Fe3o4 Composites As Anode Materials for Lithium-Ion Batteries

Electrodeposited Carbon@fe2o3 Composites As Binder-Free Anodes for Lithium Ion Batteries

Designation of a Nano-Fe3O4 Based Composite Electrode with Long Cycle Life for Lithium-Ion Batteries

Synthesis and Characterization of Carbon-Coated Fe3O4 Nanoflakes As Anode Material for Lithium-Ion Batteries

Superior electrochemical performance and structure evolution of mesoporous Fe2O3 anodes for lithium-ion batteries

Electrostatic spray deposition of porous Fe2O3 thin films as anode material with improved electrochemical performance for lithium–ion batteries

Synthesis of uniform and superparamagnetic Fe3O4 nanocrystals embedded in a porous carbon matrix for a superior lithium ion battery anode

Soft Template PEG-assisted Synthesis of Fe 3 O 4 @C Nanocomposite As Superior Anode Materials for Lithium-Ion Batteries

Synthesis and Characterization of Hollow Alpha-Fe2o3 Spheres with Carbon Coating for Li-Ion Battery

Controllable synthesis and coating-thickness-dependent electrochemical properties of mesoporous carbon-coated α-Fe2O3 nanoparticles for lithium-ion batteries

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Efficient Fe3C-CF Cathode Catalyst Based on the Formation/Decomposition of Li2−xO2 for Li-O2 Batteries

Robust Erythrocyte-Like Fe2O3@carbon with Yolk-Shell Structures As High-Performance Anode for Lithium Ion Batteries

Facile synthesis of porous iron oxides heterostructural nanosheets as an enhanced anode material for lithium ion battery

Fe3O4 Submicron Spheroids As Anode Materials for Lithium-Ion Batteries with Stable and High Electrochemical Performance