Abstract:The initial unstable stage associated with keyhole plasma arc welding affects the stability and quality heavily, especially in the non-vertical welding position, which is difficult to control and restricts the process development and application. This work clarifies the temperature distribution and flow behavior of the process from the digging keyhole stage to the keyhole stable movement stage via an infrared thermography system and high-speed camera system. The experimental results showed that the molten metal on the rear side of the keyhole gradually accumulates and solidifies on the exit side and rear wall of the keyhole. When enough molten metal accumulates on the keyhole rear sidewall, it closes under the action of surface tension. The angle (86°–90°) of the keyhole rear sidewall formation can be used to determine whether the keyhole rear side is closed and reached the keyhole stable movement stage. Simultaneously, the influence of the shifting direction of gravity on the temperature distribution, flow behavior, and solidification morphology of the keyhole weld pool was investigated, which further revealed the initial unstable stage of the welding process. In the flat position, at this stage, the high-temperature area within the keyhole rear sidewall surface gradually accumulates close to the exit side of the weld pool. More molten metal flows to the keyhole exit side by gravity and shear forces, which causes a separation area on the keyhole rear side that is nearer to the exit side of the weld pool. This makes it harder to close the keyhole wall when it is in a flat position during the initial unstable stage. Furthermore, the temperature distribution and flow behavior of the keyhole rear side can be used as another factor to characterize the flow state of the weld pool in all positions and stages of welding.

Cathode-focused High-Current Arc: Heat Source Development with Stable Keyhole in Stationary Welding

Effect of Heat Input on Weld Formation and Tensile Properties in Keyhole Mode TIG Welding Process

An Evolutionary Keyhole-Mode Heat Transfer Model in Continuous Plasma Arc Welding

Numerical Study of Keyhole Behaviors and Thermal Fluid Flow in High Current Plasma Arc Welding

Stable keyhole welding process with K-TIG

Numerical Simulation of Arc Characteristics in K-TIG Welding

Sustaining the Open Keyhole in Slow-Falling Current Edge During K-TIG Process: Principle and Parameters

A Novel Electrode-Arc-weld Pool Model for Studying the Keyhole Formation in the Keyhole Plasma Arc Welding Process

Study of molten pool dynamics in keyhole TIG welding by numerical modelling

Keyhole Thermal Behavior in GTAW Welding Process

Physical mechanism of material flow and temperature distribution in keyhole plasma arc welding at initial unstable stage

Coupled Mechanisms of the Keyhole, Energy Transfer and Compositional Change Associated with the Variable Polarity Plasma Arc Process

Fundamental understanding of open keyhole effect in plasma arc welding

Influence Mechanisms of Keyhole on the Arc Characteristics in Plasma Arc Welding

Keyhole Welding with Hybrid Plasma-Free Arc Source

Study on Time Characteristics of Coupling Discharge in Pulsed Laser–induced Twin TIG Welding

Study on Time Characteristics of Coupling Discharge in Pulsed Laser Induced Double-TIG Welding

Numerical Simulation Of Fluid Flow And Temperature Field In Keyhole Double-Sided Arc Welding Process On Stainless Steel

Heat source modeling, penetration analysis and parametric optimization of super spray MAG welding

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Numerical analysis of low-current arc characteristics in micro-TIG welding