Abstract:High-accuracy, fast-response, and low-overshoot force control are important to guarantee the material removal accuracy and surface quality of robotic compliant grinding. In order to achieve the above target, this study develops an active compliant force-controlled end-effector based on a series elastic actuator for the robotic grinding of curved parts. Firstly, a decoupled robotic grinding system composed of an industrial robot and an end-effector is developed, and a novel force-controlled end-effector is designed by adding an elastic component between the servo motor and the load to improve compliance. Secondly, the influences of the elastic component and grinding tool stiffness on the stability of the force-controlled end-effector system are analyzed by establishing a contact model of the compliant end-effector and the transfer function of the entire force control system. Then, the stiffness of the grinding tool and the elastic component are optimized with full consideration of the system cutoff frequency and the end-effector compliance. To improve the force tracking accuracies of the developed compliant end-effector, a proportional-integral (PI) controller with first-order differential force feedforward control is designed. Finally, grinding experiments are conducted for verification. The effects of spring stiffness and grinding tool stiffness on the force control system are tested, which match well with the theoretical analysis. Grinding results show that the maximum force control error of the compliant force-controlled end-effector is decreased by 70% compared to that of the rigid force-controlled end-effector, and the overshoot of the force control is reduced from 30% to almost 0 under the same response speed. The maximum and average absolute grinding depth errors using the designed end-effector are reduced by 57.2% and 58.6%, respectively, compared with those of the traditional rigid end-effector, and the average surface roughness of the finished part is reduced by 19.2%. Which demonstrates the effectiveness and advantages of the proposed compliant force-controlled end-effector.

Adaptive Impedance Control for Robotic Polishing with an Intelligent Digital Compliant Grinder.

A hybrid control strategy for grinding and polishing robot based on adaptive impedance control

Force impact suppression of contact transition state in robot grinding and polishing of industrial blades

Research on fuzzy impedance force control technology of robot-assisted abrasive cloth wheel polishing blade

Throw that epidemiologist out of the emergency room! Using the television series ER as a vehicle for teaching methodologists about medical issues.

PD-adaptive variable impedance constant force control of macro-mini robot for compliant grinding and polishing

Active Compliance Smart Control Strategy of Hybrid Mechanism for Bonnet Polishing

An adaptive impedance control method for blade polishing based on the Kalman filter

Studies on lipoxygenase inhibitors. I. MY3-469 (3-methoxytropolone), a potent and selective inhibitor of 12-lipoxygenase, produced by Streptoverticillium hadanonense KY11449.

Research on Surface Tracking and Constant Force Control of a Grinding Robot

Proxy-Based Sliding Mode Force Control for Compliant Grinding via Diagonal Recurrent Neural Network and Prandtl-Ishlinskii Hysteresis Compensation Model

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Research and application on force control of industrial robot polishing concave curved surfaces

Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Hybrid active/passive force control strategy for grinding marks suppression and profile accuracy enhancement in robotic belt grinding of turbine blade

Robotic compliant grinding of curved parts based on a designed active force-controlled end-effector with optimized series elastic component

Design and constant force control of a parallel polishing machine

A polishing force control strategy for robot pneumatic end-effector based on adaptive sliding mode backstepping algorithm

Study on force control in abrasive polishing of aspheric parts

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces