Abstract:The IceCube Neutrino Observatory is a cubic kilometer volume neutrino detector installed in the Antarctic at the geographic South Pole. Neutrinos are detected through the observation of Cherenkov light from charged relativistic particles generated in neutrino interactions, using an array of 86~strings of optical sensor modules. Currently an upgrade to the IceCube detector is in preparation. This IceCube Upgrade will add seven additional strings with new optical sensors and calibration devices. A new camera system is designed for this upgrade to be installed with the new optical modules. This camera system will study bulk ice properties and the refrozen ice in the drill hole. The system can also be utilized to provide information on the detector geometry including location and orientation of the optical modules and cables that can be used to calibrate IceCube Monte Carlo simulations. A better understanding of the refrozen ice in the drill hole including the complementary knowledge of the optical properties of the surrounding glacial ice will be obtained by surveying and analyzing the images from this system. The camera system consists of two types of components: an image sensor module and an illumination module. The image sensor module uses a CMOS image sensor to take pictures for the purpose of calibration studies. The illumination module emits static, monochromatic light into a given direction with a specific beam width and brightness during the image taking process. To evaluate the system design and demonstrate its functionality, a simulation study based on lab measurements is performed in parallel with the hardware development. This study allows for the development of the preliminary image analysis tool for the system. We present the prototype of the camera system and the results of the first system demonstrations.

Scientific CCD camera for the CSTAR2 telescope in Antarctica

Progress and results from the chinese small telescope ARray (CSTAR)

Design of A Panoramic Long-Wave Infrared Athermal System

Development and Performance Test of a Scientific CCD Camera Prototype for the Earth 2.0 Mission

Optical System of the Three Antarctic Survey Telescopes

The Multi-band Survey Telescope at Zhongshan Station, Antarctica

Thermalizing a telescope in Antarctica: Analysis of ASTEP observations

Efficient routing of multiple vehicles with no communications

CCAT-prime: a novel telescope for submillimeter astronomy

PHOTOMETRIC VARIABILITY IN THE CSTAR FIELD: RESULTS FROM THE 2008 DATA SET

Design of a Non-vacuum-cooling Compact Scientific CCD Camera

The Bright Star Survey Telescope for the Planetary Transit Survey in Antarctica

Observing exoplanets from Antarctica in two colours: Set-up and operation of ASTEP+

Design of a CCD Camera Prototype for the Earth 2.0 Mission

Control Software for the SST-1M Small-Size Telescope prototype for the Cherenkov Telescope Array

The camera system for the IceCube Upgrade

Design and Bolometer Characterization of the SPT-3G First-year Focal Plane

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

The First Release of the AST3-1 Point Source Catalogue from Dome A, Antarctica

Development of a Zynq-Based Seismic Acquisition Station for the Exploration of Antarctic Subglacial Lakes

Antarctic Survey Telescope 3-3: Overview, System Performance and Preliminary Observations at Yaoan, Yunnan