Abstract:The conversion of plastic waste to high value-added aromatics such as benzene, toluene, ethylbenzene, xylene (BTEX) through catalytic pyrolysis offers huge untapped opportunities for resource recovery and plastic pollution control. Economical equipment configuration, operation and maintenance, high safety factor, high efficiency, stability, low-cost catalyst synthesis design, high yield, high selectivity of products are the key to the practical application of catalytic pyrolysis. In present study, low-cost kieselguhr based ZSM-5 was synthesized by one-pot in situ hydrothermal method using kieselguhr as silicon-aluminum source. During the depolymerization-recrystallization process, the selective growth and self-assembly of crystals on the a, c axis formed large-grain of ZSM-5 with extended straight channels and maximized sinusoidal channels. Native transition and alkaline-earth metals were coordinated to the acidic sites of the silica-aluminum skeleton, achieving tunability of the catalyst acidity. Catalytic pyrolysis of mask waste at 550 °C in a fixed bed reactor achieved the highest pyrolysis oil yield (44.3 wt%) and BTEX selectivity (77.1 %) with p -xylene as the dominant xylene product (78.2 %). After 3 cycles of long-life experiments, the BTEX selectivity of the catalyst remained at 65.1 %, which is higher than that of commercial ZSM-5 (54.9 %), indicating the superior use stability. Molecular dynamics simulations showed that the excellent shape-selectivity of the catalyst is based on its unique pore structure, which facilitates the diffusion and transport of appropriately sized intermediates/products within the structure, resulting in products with advantageous distributions. This study proposes an efficient and feasible plastic closed-loop strategy for green upgrading of medical waste to high value-added chemicals.

Waste Seashells As a Highly Active Catalyst for Cyclopentanone Self-Aldol Condensation

A One-Step Method for Preparing Cr-doped SiO2: an Efficient Catalyst for the Direct Oxidation of Cyclohexane to Ketone-Alcohol Oil

Honeycomb-like Porous Ce–Cr Oxide/n-Doped Carbon Nanostructure: Achieving High Catalytic Performance for the Selective Oxidation of Cyclohexane to KA Oil

Eco-friendly CaO-based catalysts derived from waste oyster shells for the oxidative coupling of methane

Diatomite Stabilized KOH: An Efficient Heterogeneous Catalyst for Cyclopentanone Self‐condensation

Coupling of Steam and CaO Derived from Oyster Shells in the Pyrolysis of Waste Poly(ethylene Terephthalate) for the Selective Production of Aromatic Hydrocarbons

ZSM–5@KIT–6 encapsulated composite molecular sieves for the catalytic cracking of waste cooking oil model compound to produce light olefins

The Effect of CaO Catalyst Mass from Golden Snail Shell (Pomacea Canaliculata Lamarck) on Transesterification Reaction

Optimization of Green and Environmentally-Benign Synthesis of Isoamyl Acetate in the Presence of Ball-Milled Seashells by Response Surface Methodology

Catalytic self-activation of Ca-doped coconut shell for in-situ synthesis of hierarchical porous carbon supported CaO transesterification catalyst

Synthesis of CaO from waste shells for microwave-assisted catalytic pyrolysis of waste cooking oil to produce aromatic-rich bio-oil

One-Step Biodiesel Production from Waste Cooking Oil Using CaO Promoted Activated Carbon Catalyst from Prunus persica Seeds

Application of waste derived magnetic acid-base bifunctional CoFe/biochar/CaO as an efficient catalyst for biodiesel production from waste cooking oil

Microwave-assisted pyrolysis of waste cooking oil for bio-based hydrocarbons over Chem-CaO@SiC catalyst

Using waste crayfish shell derived catalyst to synthesize glycerol carbonate by transesterification reaction between glycerol and dimethyl carbonate

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Gasification of Lipid-Extracted Microalgae Biomass Promoted by Waste Eggshell As CaO Catalyst

Preparation and catalytic behavior of biomorphic calcium oxide/carbon solid base materials

Production of bio-oil from waste cooking oil via microwave-assisted pyrolysis in the presence of waste eggshell CaO and HZSM-5: Process optimization and catalyst lifetime exploration

Mesoporous-Layered Double Oxide/MCM-41 Composite with Enhanced Catalytic Performance for Cyclopentanone Aldol Condensation

PEG-assisted Synthesis of Highly Dispersed Cs/Zr-SiO2 Catalyst for Aldol Condensation of Methyl Acetate with Formaldehyde