Abstract:Given the limited operating ability of a single robotic arm, dual-arm collaborative operations have become increasingly prominent. Compared with the electrically driven dual-arm manipulator, due to the unknown heavy load, difficulty in measuring contact forces, and control complexity during the closed-chain object transportation task, the hydraulic dual-arm manipulator (HDM) faces more difficulty in accurately tracking the desired motion trajectory, which may cause object deformation or even breakage. To overcome this problem, a compliance motion control method is proposed in this paper for the HDM. The mass parameter of the unknown object is obtained by using an adaptive method based on velocity error. Due to the difficulty in obtaining the actual internal force of the object, the pressure signal from the pressure sensor of the hydraulic system is used to estimate the contact force at the end-effector (EE) of two hydraulic manipulators (HMs). Further, the estimated contact force is used to calculate the actual internal force on the object. Then, a compliance motion controller is designed for HDM closed-chain collaboration. The position and internal force errors of the object are reduced by the feedback of the position, velocity, and internal force errors of the object to achieve the effect of the compliance motion of the HDM, i.e., to reduce the motion error and internal force of the object. The required velocity and force at the EE of the two HMs, including the position and internal force errors of the object, are inputted into separate position controllers. In addition, the position controllers of the two individual HMs are designed to enable precise motion control by using the virtual decomposition control method. Finally, comparative experiments are carried out on a hydraulic dual-arm test bench. The proposed method is validated by the experimental results, which demonstrate improved object position accuracy and reduced internal force.

Collision Detection and Coordinated Compliance Control for a Dual-Arm Robot Without Force/Torque Sensing Based on Momentum Observer

Collision Detection and Safe Reaction of Manipulator Based on Disturbance Observer

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Liberating Humanity from Heavy Labor: Dual-Arm Coordination and Teleoperation Control for an Assistive Robot

Compliance Control for Standing Maintenance of Humanoid Robots under Unknown External Disturbances.

Resolved-momentum-based real-time balance control for high-speed arm manipulation of humanoid robot

Adaptive Compliance Control of Dual-arm Robot for Cooperative Handling Task

Collision observation of collaborative robots based on generalized momentum deviation

Collision detection algorithm for robot manipulator based on momentum deviation observer

Dual-Arm Coordinated Motion Planning and Compliance Control for Capturing Moving Objects with Large Momentum

A Novel Sliding Mode Momentum Observer for Collaborative Robot Collision Detection

Collision Detection and Identification for Robot Manipulators Based on Extended State Observer

Coordinated compliance control of dual-arm robot for payload manipulation: Master-slave and shared force control

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Real-time Self-collision Avoidance-oriented Torque Control Strategy for Dual-arm Robot

Position-Based Contact Force Synchronous Control for Dual-Arm Cooperative Manipulators

Compliance motion control of the hydraulic dual-arm manipulator with adaptive mass estimation of unknown object

Cooperative Control for Dual-Arm Robots Based on Improved Dynamic Movement Primitives

Coordinated compliance control of dual-arm robot astronaut for payload operation

A nonlinear momentum observer for sensorless robot collision detection under model uncertainties

Coordinated Resolved Motion Control of Dual-Arm Manipulators with Closed Chain