Abstract:The development of electrode materials with the synergistic effects of good chemical stability and high electrical conductivity has improved the sluggish ion kinetics and severe capacity degradation of rechargeable lithium batteries. Herein, a multifunctional heterostructure material (MoS3-Ti3C2Tx) comprising a functionalized MXene (Ti3C2Tx) and amorphous MoS3 is prepared by a scalable electrostatic self-assembly method. Remarkably, as lithium-ion battery anodes, the resultant MoS3-Ti3C2Tx not only exhibits increased electrochemical activity, accelerated lithium-ion diffusion and fast charge transfer kinetics but also shows high specific capacity, excellent rate performance and long-term cycling stability. By virtue of these merits, MoS3-Ti3C2Tx offers an excellent reversible capacity of 1043 mAh g−1 at 200 mA g−1 and exhibited a capacity of 568 mAh g−1 at a current density of 2 A g−1 after 1000 cycles. When acting as the cathode for lithium-sulfur batteries, the amorphous MoS3 anchored on MXene demonstrates high capture and catalytic activity towards polysulfide conversion. Accordingly, the optimized electrode exhibits a capacity of 836 mAh g−1 at 0.2C after 100 cycles and a satisfactory rate performance of 463 mAh g−1 at 2C after 400 cycles. Moreover, the associated conversion mechanism is studied by ex situ XPS. These results demonstrate that heterostructure composites constructed by an amorphous sulfide and surface functionalized MXene are feasible electrode materials for both lithium-sulfur batteries and lithium-ion batteries.

Strongly Coupled MoS2 Nanocrystal/Ti3 C2 Nanosheet Hybrids Enable High-Capacity Lithium-Ion Storage.

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

In-situ fabrication of few-layered MoS<sub>2</sub> wrapped on TiO<sub>2</sub>-decorated MXene as anode material for durable lithium-ion storage

A two-dimensional assembly of ultrafine cobalt oxide nanocrystallites anchored on single-layer Ti3C2Tx nanosheets with enhanced lithium storage for Li-ion batteries

Carbon-coated MoS 2 /Mxene hybrids for enhanced Li-ions storage performance

MOF-Derived ZnS Nanodots/Ti3C2Tx MXene Hybrids Boosting Superior Lithium Storage Performance

Multi-role TiO2 Layer Coated Carbon@few-Layered MoS2 Nanotubes for Durable Lithium Storage

One-Step Hydrothermal Reaction Induced Nitrogen-Doped MoS2/MXene Composites with Superior Lithium-Ion Storage

Co Decoration of Molybdenum Sulfide and Carbon for Improving Lithium Ion Capacity of Large Monolayer MXene Cathodes

Few-layer MoS2 Nanosheets Vertically Supported on Ti3C2-MXene Sheets Promoting Lithium Storage Performance

MOF-derived N,S Co-doped carbon matrix-encapsulated Cu2S nanoparticles as high-performance lithium-ion battery anodes: a joint theoretical and experimental study

Coupling ultrafine SiO2 nanoparticles with three-dimensional porous Ti3C2Tx MXene as anode materials for high-performance lithium-ion batteries

Tubular-like Nanocomposites with Embedded Cu9S5-MoSx Crystalline-Amorphous Heterostructure in N-Doped Carbon As Li-Ion Batteries Anode Toward Ultralong Cycling Stability.

Few-layer MoS 2 nanosheets vertically supported on Ti 3 C 2 -MXene sheets promoting lithium storage performance

2D Black TiO2-x Nanoplate-Decorated Ti3C2 MXene Hybrids for Ultrafast and Elevated Stable Lithium Storage

Interfacial Reinforcement Structure Design Towards Ultrastable Lithium Storage in MoS2-based Composited Electrode

MXene-decorated SnS2/Sn3S4 Hybrid As Anode Material for High-Rate Lithium-Ion Batteries

Electrostatically Assembling 2D Nanosheets of MXene and MOF-Derivatives into 3D Hollow Frameworks for Enhanced Lithium Storage

3D Porous Ti<sub>3</sub>C<sub>2</sub> MXene/NiCo-MOF Composites for Enhanced Lithium Storage

Amorphous MoS3 decoration on 2D functionalized MXene as a bifunctional electrode for stable and robust lithium storage

Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries