Abstract:Contamination withstand performance of power equipment adopting silicon rubber as external insulation is dominated by its hydrophobicity. To reveal hydrophobicity transfer mechanism of various non-soluble pollutant on silicon rubber surface, several inert materials of similar chemical component were selected, including Kaolin, Kieselguhr, and silicon dioxide microspheres. Static contact angle tests at various transfer times are performed to obtain the hydrophobicity transfer characteristics of various pollutants. Scanning electron microscope (SEM) test and mercury intrusion porosimetry (MIP) of these inert materials are also carried out to observe the topographical microstructure. Results show that the variations between static contact angle and hydrophobicity transfer time perform great distinction depending on the microscopic properties of inert material. According to MIP and SEM analysis of Kieselguhr, two kinds of pores are found, which play different part on hydrophobicity transfer process. It is proposed that there are two patterns superimposed in hydrophobicity transfer process. One was the “fast process”, determined by the large pore among inert material particles, controlled hydrophobicity transfer speed in first 10 hours. While the other was the “slow process”, resulted by the small pore in inert material particles, determines the final static contact angle. In conclusion, the hydrophobicity transfer process from silicone rubber surface to pollutant surface is a superposition effect of the two transfer processes, especially for porous inert materials. This paper has researched the concrete hydrophobicity transfer process considering the influence of non-soluble pollutant microcosmic characteristics. The results have great significance for hydrophobicity transfer theory and guidance value for outdoor insulation practice of transmission line.

Effects of Algae Contamination on Composite Insulator Hydrophobic Property

Algae Distribution on the HVDC Composite Insulator and the Influence of Algal Activity on Electrical Characteristics of Silicone Rubber

Influence of Algae Growth on the External Insulation Performance of HVDC Insulators

Effects of Asymmetrical Algal Distribution on the AC Flashover Characteristics of Bio-Contaminated Silicone Rubber Insulators

Hydrophobicity characteristics of algae-fouled HVDC insulators in subtropical climates

Research of Biological Contamination and Its Effect on the Properties of RTV-coated Insulators

Research On The Discharge Mechanism Of The Algae-Contaminated Insulators

Influence of Green Algae on Hydrophobic Property of HTV Silicon Rubber

Influence of Algae Growth on the Electrical Performance of RTV Coated Post Insulators

Study on the Algae Contamination and Its Effects on the Properties of RTV-Coated Insulators

Inhibition of algae growth on HVDC polymeric insulators using antibiotic-loaded silica aerogel nanocomposites

Research of Image Processing Method on Alage Conolized on the Insulator Surface

Influence of algae growth on the electrical performance of RTV coating

Electrical Performance of a New RTV Coating with the Addition of Antimicrobial Agents

Influence of Non-Soluble Contamination Microscopic Properties on Hydrophobicity Transfer on Silicone Rubber Surface of Composite Insulator

Study on the Effect of Environmental Factors on Hydrophobicity of Composite Insulator

Evaluation of Electrical Insulation Properties on Aged Composite Insulators in Heavily Contaminated Areas

Investigation on Composite Insulators in Contaminated Areas

Investigation on Hydrophobicity and Pollution Status of Composite Insulators in Contaminated Areas

Surface Roughness Effect on the Hydrophobicity Characteristic of Operating Composite Insulators

Measurement Analysis of Composite Insulator Hydrophobicity and Its Influence Factors