Abstract:The advent of simultaneous wireless information and power (SWIPT) has been regarded as a promising technique to provide power supplies for an energy sustainable Internet of Things (IoT), which is of paramount importance due to the proliferation of high data communication demands of low-power network devices. In such networks, a multi-antenna base station (BS) in each cell can be utilized to concurrently transmit messages and energies to its intended IoT user equipment (IoT-UE) with a single antenna under a common broadcast frequency band, resulting in a multi-cell multi-input single-output (MISO) interference channel (IC). In this work, we aim to find the trade-off between the spectrum efficiency (SE) and energy harvesting (EH) in SWIPT-enabled networks with MISO ICs. For this, we derive a multi-objective optimization (MOO) formulation to obtain the optimal beamforming pattern (BP) and power splitting ratio (PR), and we propose a fractional programming (FP) model to find the solution. To tackle the nonconvexity of FP, an evolutionary algorithm (EA)-aided quadratic transform technique is proposed, which recasts the nonconvex problem as a sequence of convex problems to be solved iteratively. To further reduce the communication overhead and computational complexity, a distributed multi-agent learning-based approach is proposed that requires only partial observations of the channel state information (CSI). In this approach, each BS is equipped with a double deep Q network (DDQN) to determine the BP and PR for its UE with lower computational complexity based on the observations through a limited information exchange process. Finally, with the simulation experiments, we verify the trade-off between SE and EH, and we demonstrate that, apart from the FP algorithm introduced to provide superior solutions, the proposed DDQN algorithm also shows its performance gain in terms of utility to be up to 1.23-, 1.87-, and 3.45-times larger than the Advantage Actor Critic (A2C), greedy, and random algorithms, respectively, in comparison in the simulated environment.

Robust Beamforming Design for SWIPT in Cellular Internet of Things

Mixed-Timescale Beamforming and Power Splitting for Massive MIMO Aided SWIPT IoT Network

Robust Beamforming for NOMA-Based Cellular Massive IoT with SWIPT.

Beamforming Design with Bilevel Optimization for RIS-Assisted SWIPT Systems

Robust Secure Beamforming Design for Multi-RIS-Aided MISO Systems with Hardware Impairments and Channel Uncertainties

Robust Beamforming for SWIPT in Massive MIMO

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Secure Hybrid A/D Beamforming for Hardware-Efficient Large-Scale Multiple-Antenna SWIPT Systems

Multi-Objective Beamforming for Energy-Efficient SWIPT Systems

Robust Beamforming Design For Swipt-Based Multi-Radio Wireless Mesh Network With Cooperative Jamming

Decentralized Beamforming for Location-Aware SWIPT in Coordinated Multi-Cell Networks

Optimal Coordinated Beamforming with Artificial Noise for Secure SWIPT in Multi-Cell Networks

Decentralized Robust Transceiver Designs for MISO SWIPT Interference Channel

Beamforming Optimization for Active Intelligent Reflecting Surface-Aided SWIPT

Robust Beamforming Design and Time Allocation for IRS-Assisted Wireless Powered Communication Networks

Integrating Sensing, Communication, and Power Transfer: Multiuser Beamforming Design

Max-Min Fair Beamforming for SWIPT Systems with Non-Linear EH Model

SWIPT in Mixed Near- and Far-Field Channels: Joint Beam Scheduling and Power Allocation

Wireless Powered Massive Access For Cellular Internet Of Things With Imperfect Sic And Nonlinear Eh

Joint Data Transmission and Energy Harvesting for MISO Downlink Transmission Coordination in Wireless IoT Networks