Abstract:The traditional cementitious product is prone to suffer from a high degree of deterioration in the case of exposure to acid solutions because of the decomposition of the binder network. However, the degradation of concrete structures in service by mild concentrations of acid under conditions involving sewage, industrial waters, and acid rain is more common and results in a significant environmental problem. The utilization of alkali-activated materials has been seen to potentially offer an attractive option with regard to acceptable durability and a low carbon footprint. With the aid of visual observation, mass loss, compressive strength tests, X-ray diffraction, Fourier transform infrared spectroscopy, and field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy, the acid resistance of alkali-activated fly ash mortars in which the precursor was partially replaced (0–30% by mass proportion) with ordinary Portland cement (OPC) was evaluated after 180 days of exposure to mild-concentration sulfuric and acetic solutions (pH = 3). A conventional cement mortar (100% OPC) was used as a reference group. The results demonstrate that the addition of OPC into the alkali-activated system causes a significant increase in compressive strength (around 16.08–36.61%) while showing an opposite influence on durability after acid attack. Based on a linear mean value and nonlinear artificial neural network model simulation, the mass losses of the specimens were evaluated, and the alkali-activated pure-fly ash mortar demonstrated the lowest value (i.e., a maximum of 5.61%) together with the best behavior in the aspect of discreteness at 180 days. The results from microstructure analysis show that the coexistence of the N–A–S–H and C–S–H networks in the blend system occurred by both OPC hydration and FA. However, the formation of the gypsum deposition within the fly ash-OPC blend systems at sulfuric acid was found to impose internal disintegrating stresses, causing a significant area of delamination and cracks. In addition, alkali metal ion leaching, dealumination, as well as the disappearance of some crystalline phases occurred in specimens immersed in both types of acids.

Alkali-Activated Mortar for Tunnel-Lining Structure Repair

Fabrication of Graphene Oxide/Fiber Reinforced Polymer Cement Mortar with Remarkable Repair and Bonding Properties

Performance Characteristics of Micro Fiber-Reinforced Ambient Cured One-Part Geopolymer Mortar for Repairing

Self-healing properties of mortar with crystalline admixture: experimental investigation and parameter optimization

The potential of one-part alkali-activated materials (AAMs) as a concrete patch mortar

Explorative Study into Alkali-Activated Repair Mortars Using Blast Furnace Slag and Glass Waste

Polyvinyl-Alcohol-Modified Calcium Sulphoaluminate Cement Repair Mortar: Hydration and Properties

Effects of silicate modulus and alkali dosage on the performance of one-part electric furnace nickel slag-based geopolymer repair materials

Investigating the Effects of MWCNTs on Sustainable Alkali-Activated Mortar: Physical, Rheological, and Mechanical Analysis

Performance Of Rapid Repair Mortars With Sulfate Aluminium Cement And Portland Cement

Resistance of blended alkali-activated fly ash-OPC mortar to mild-concentration sulfuric and acetic acid attack

Scaling Resistance And Application Of Cementitious Repair Mortars For Concrete Barriers

Strength, Fracture and Durability Characteristics of Ambient Cured Alkali—Activated Mortars Incorporating High Calcium Industrial Wastes and Powdered Reagents

On advances in construction materials and systems , icacms 2017 bond enhancement of repair mortar via biodeposition

Bonding behavior of concrete matrix and alkali-activated mortar incorporating nano-SiO2 and polyvinyl alcohol fiber: Theoretical analysis and prediction model

New Attempt to Produce Red Mud-Iron Tailing Based Alkali-Activated Mortar: Performance and Microstructural Characteristics

Structural Formation of Alkali-Activated Materials Based on Thermally Treated Marl and Na2SiO3

Effect of Alkali Content of Cement on Properties of High Performance Cementitious Mortar

The Performance Analysis of Ordinary Portland Cement-Sulfoaluminate Cement Structural Repair Reinforced Materials Compounded with Metakaolin

The Effects of Crystalline Admixture on the Self-Healing Performance and Mechanical Properties of Mortar with Internally Added Superabsorbent Polymer

Alkali-activated red mud in stabilizing marine dredged clay with low amount of cement