Abstract:Based on the analytical solution of Crouch to the problem of a constant discontinuity in displacement over a finite line segment in an infinite elastic solid, in the present paper, the crack-tip displacement discontinuity elements, which can be classified as the left and the right crack-tip elements, are presented to model the singularity of stress near a crack tip. Furthermore, the crack-tip elements together with the constant displacement discontinuity elements presented by Crouch and Starfied are used to develop a numerical approach for calculating the stress intensity factors (SIFs) of general plane cracks. In the boundary element implementation, the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundaries. The method is called the hybrid displacement discontinuity method (HDDM). Numerical examples are given and compared with the available solutions. It can be found that the numerical approach is simple, yet very accurate for calculating the SIFs of branched cracks. As a new example, cracks emanating from a rhombus hole in an infinite plate under biaxial loads are taken into consideration. The numerical results indicate the efficiency of the present numerical approach and can reveal the effect of the biaxial load on the SIFs. In addition, the hybrid displacement discontinuity method together with the maximum circumferential stress criterion (Erdogan and Sih) becomes a very effective numerical approach for simulating the fatigue crack propagation process in plane elastic bodies under mixed-mode conditions. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the HDDM. Crack propagation is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented.

Computation of T-stresses for multiple-branched and intersecting cracks with the numerical manifold method

T-stress extraction in arbitrarily cracked orthotropic composites with the numerical manifold method and Stroh formalism

Numerical simulation for T-stress for complex multiple branching and intersecting cracks based on continuous-discontinuous cellular automaton

Explicit edge-based smoothed numerical manifold method for transient dynamic modeling of two-dimensional stationary cracks

A Damage-Based Numerical Manifold Approach to Crack Propagation in Rocks

Numerical Simulation of the Multiple 3D Crack Propagation from the Countersunk Fastener Holes

Investigation of stress wave induced cracking behavior of underground rock mass by the numerical manifold method

Formation algorithm of covers and manifold elements in NMM during propagation of cracks

Incompatible Numerical Manifold Method for Fracture Problems

A four-way enhanced numerical manifold method for crack propagation and failure analysis of rock slopes

Numerical simulation of dynamic fractures in 2D FGMs using the numerical manifold method

An explicit improved meshless numerical manifold method for dynamic crack propagation

New strategies for some issues of numerical manifold method in simulation of crack propagation

An Efficient and Accurate Numerical Method of Stress Intensity Factors Calculation of a Branched Crack

Simulation of Deformation Process Failure of Jointed Rock Masses Based on the Numerical Manifold Method

A Numerical Analysis of Stress Intensity Factors at Bifurcated Cracks

Dynamic Fracture Analysis Using a High-Accuracy Manifold Element Modelling Scheme

STRUCTURE FAILURE ANALYSIS BASED ON MANIFOLD METHOD

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

Analytical Solution of T-stresses for an Inclined Crack in Compression

Comprehensive simulations of rock fracturing with pre-existing cracks by the numerical manifold method