Abstract:With conventional stethoscopes, the auscultation results may vary from one doctor to another due to a decline in his/her hearing ability with age or his/her different professional training, and the problematic cardiopulmonary sound cannot be recorded for analysis. In this paper, to resolve the above-mentioned issues, an electronic stethoscope was developed consisting of a traditional stethoscope with a condenser microphone embedded in the head to collect cardiopulmonary sounds and an AI-based classifier for cardiopulmonary sounds was proposed. Different deployments of the microphone in the stethoscope head with amplification and filter circuits were explored and analyzed using fast Fourier transform (FFT) to evaluate the effects of noise reduction. After testing, the microphone placed in the stethoscope head surrounded by cork is found to have better noise reduction. For classifying normal (healthy) and abnormal (pathological) cardiopulmonary sounds, each sample of cardiopulmonary sound is first segmented into several small frames and then a principal component analysis is performed on each small frame. The difference signal is obtained by subtracting PCA from the original signal. MFCC (Mel-frequency cepstral coefficients) and statistics are used for feature extraction based on the difference signal, and ensemble learning is used as the classifier. The final results are determined by voting based on the classification results of each small frame. After the testing, two distinct classifiers, one for heart sounds and one for lung sounds, are proposed. The best voting for heart sounds falls at 5–45% and the best voting for lung sounds falls at 5–65%. The best accuracy of 86.9%, sensitivity of 81.9%, specificity of 91.8%, and F1 score of 86.1% are obtained for heart sounds using 2 s frame segmentation with a 20% overlap, whereas the best accuracy of 73.3%, sensitivity of 66.7%, specificity of 80%, and F1 score of 71.5% are yielded for lung sounds using 5 s frame segmentation with a 50% overlap.

HEART SOUND MODEL BASED ON CASCADED AND LOSSLESS ACOUSTIC TUBES

Beating Heart Modeling and Simulation

Electrodynamic Heart Model Construction and ECG Simulation

Modeling and Simulation of Transmural Cellular Electromechanical Properties in Heart Failure

An Electrical Heart Model Incorporating Real Geometry and Motion

THE CONSTRUCTION OF THE ELECTROCARDIOGRAPHIC SIMULATION MODEL OF BEATING HEART

[Study of Biometric Identification of Heart Sound Base on Mel-Frequency Cepstrum Coefficient].

Simulation Study of A Magnetocardiogram Based on A Virtual Heart Model: Effect of A Cardiac Equivalent Source and A Volume Conductor

Volumetric modeling electromechanics of the heart

Simulation of Active Cardiac Dynamics with Orthotropic Hyperelastic Material Model

Whole-heart modelling with valves in a fluid–structure interaction framework

A robust method for heart sounds classification based on empirical mode decomposition adaptive reconstruction.

Bayesian estimation of dissipation and sound speed in tube measurements using a transfer-function model

A new model for calculating auditory excitation patterns and loudness for cases of cochlear hearing loss.

Development of an Electronic Stethoscope and a Classification Algorithm for Cardiopulmonary Sounds

A Heart Sound Signal Classification Method Based on the Mixed Characteristics of Mel Cepstrum Coefficient and Second-Order Spectrum

Lumped Parameter Model for Heart Failure with Novel Regulating Mechanisms of Peripheral Resistance and Vascular Compliance

An enhanced ultrasonic method for monitoring and predicting stress loss in multi-layer structures via vibro-acoustic modulation

An electromechanics-driven fluid dynamics model for the simulation of the whole human heart

The Realization of Acoustic Model Based on Noise Modulating for Cochlear Implantation