The Controllable Growth of PtCuRh Rhombic Dodecahedral Nanoframes As Efficient Catalysts for Alcohol Electrochemical Oxidation

Zhen Wang,Lei Huang,Zhi Qun Tian,Pei Kang Shen

DOI: https://doi.org/10.1039/c9ta06119c

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:In this paper, two different Rh-strengthened rhombohedral dodecahedron nanoframes promoting catalytic performance towards the MOR and EOR were synthesized.

What problem does this paper attempt to address?

Kinetically-controlled growth of cubic and octahedral Rh-Pd alloy oxygen reduction electrocatalysts with high activity and durability.

Yucong Yan,Fangwei Zhan,Jingshan Du,Yingying Jiang,Chuanhong Jin,Maoshen Fu,Hui Zhang,Deren Yang

DOI: https://doi.org/10.1039/c4nr04942j

IF: 6.7

2015-01-01

Nanoscale

Abstract:Rh is a promising candidate as an indispensible component in bimetallic catalysts due to its unique capability to resist against the aggressive corrosion from the reaction medium. However, Rh has a very strong oxygen binding ability and is generally not suitable for the oxygen reduction reaction (ORR). Here, we have demonstrated shape-controlled synthesis of Rh-Pd alloy nanocrystals with high activity and durability for ORR by retarding the reaction kinetics at an ultra-slow injection rate of metal salts using a syringe pump. Under precise control of sluggish reaction kinetics, Pd followed a preferential overgrowth along the <100> direction, whereas the growth behavior of Rh was dominant along the <111> direction. These different kinetically-controlled growth behaviors associated with Rh and Pd were essential for achieving the shape transition between the cube and the octahedron of their alloys. The Rh8Pd92 alloy octahedra exhibited the highest mass activity with a value of 0.18 mA mu g(-1) in terms of the equivalent Pt cost, and were two-fold higher than that of commercial Pt/C. Significantly, all Rh-Pd alloy nanocrystals were highly stable with only less than 25% loss in mass activity after 30 000 CV cycles in O-2 saturated acid solution compared to similar to 56% loss of the commercial Pt/C (E-TEK). Indeed, the mass activity of Rh8Pd92 was 3.3 times higher than that of commercial Pt/C after the accelerated stability test (ADT). This improvement in activity and durability may arise possibly from synergistic effects between the facet and the surface composition.
Two-step Etching Fabrication of Tunable Ternary Rhombic Dodecahedral Nanoframes for Enhanced Oxygen Reduction Electrocatalysis

Lei Huang,Zheng Jiang,Wenhao Gong,Zhen Wang,Pei Kang Shen

DOI: https://doi.org/10.1016/j.jpowsour.2018.10.041

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:The shape-tunable Pt-Cu-Ni rhombic dodecahedra nanoframe is achieved via modified solvothermal and two-step etching, the first step is Pt-Cu-Ni concave rhombic dodecahedra synthetized due to oxidation etching, and the second step is Pt-Cu-Ni nanoframes obtained through the acid etching. The Pt-Cu-Ni solid rhombic dodecahedra as an intermediate product can be well controlled by adjusting the amount of reaction time and Ni precursor. Based on the formation mechanism of Pt-Cu nanoframes, the morphological evolution process of ternary nanoframe is precisely investigated according to the changes of morphology, atomic ratio and average particle size. In addition, shape-tunable Pt-Cu-Ni nanoframes catalyst shows enhanced mass activity of 0.86 A mg(-1) Pt at 0.9 V versus reversible hydrogen electrode towards oxygen reduction reaction, which is 6 times as well as that of the commercial Pt/C catalyst. Remarkably, there is a more positive onset potential of Pt-Cu-Ni nanoframes compared to other catalysts. More importantly, this synthetic method opens a promising door towards development and applications of Pt based catalysts.
Facile Synthesis of Pd@PtM (<i>M</i> = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction

Xingqiao Wu,Xiao Li,Yucong Yan,Sai Luo,Jingbo Huang,Junjie Li,Deren Yang,Hui Zhang

DOI: https://doi.org/10.3389/fchem.2021.683450

IF: 5.5

2021-01-01

Frontiers in Chemistry

Abstract:Pt-based multimetallic nanorings with a hollow structure are attractive as advanced catalysts due to their fantastic structure feature. However, the general method for the synthesis of such unique nanostructures is still lack. Here we report the synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) multimetallic nanorings by selective epitaxial growth of Pt alloyed shells on the periphery of Pd nanoplates in combination with oxidative etching of partial Pd in the interior. In situ generation of CO and benzoic acid arising from interfacial catalytic reactions between Pd nanoplates and benzaldehyde are critical to achieve high-quality Pt-based multimetallic nanorings. Specifically, the in-situ generated CO promotes the formation of Pt alloyed shells and their epitaxial growth on Pd nanoplates. In addition, the as-formed benzoic acid and residual oxygen are responsible for selective oxidative etching of partial Pd in the interior. When evaluated as electrocatalysts, the Pd@PtRh nanorings exhibit remarkably enhanced activity and stability for ethanol oxidation reaction (EOR) compared to the Pd@PtRh nanoplates and commercial Pt/C due to their hollow nanostructures.
Dendritic Core-Frame and Frame Multimetallic Rhombic Dodecahedra: A Comparison Study of Composition and Structure Effects on Electrocatalysis of Methanol Oxidation

Leanne E. Mathurin,Jing Tao,Huolin Xin,Jun Li,Yimei Zhu,Jingyi Chen

DOI: https://doi.org/10.1002/cnma.201700249

IF: 3.82

2017-01-01

ChemNanoMat

Abstract:The composition and structure of multimetallic nanostructures can be tailored to enhance electrocatalytic properties. This work reports a seed-mediated synthesis of novel multimetallic dendritic core-frame and frame nanostructures with a rhombic dodecahedral shape for enhanced methanol oxidation reaction (MOR). The synthesis involves insitu formation of Cu seeds and the subsequent selective deposition of Pt and Ru on the edges and vertices of the Cu seeds to generate CuPt and CuPtRu dendritic core-frame nanostructures. The core-frame nanostructures undergo a post acetic acid etching process to form the frame nanostructures. While transmission electron microscopy reveals the morphology and elemental distribution of the nanostructures, X-ray diffraction patterns confirm the alloy compositions of dendritic frames for both the core-frame and frame nanostructures. Compared to the bimetallic CuPt nanostructures, the trimetallic CuPtRu nanostructures lower the onset potential and completely suppress the peak current in the reverse scan for MOR. The CuPtRu alloyed frame nanostructures are the best to prevent Ru leaching compared to the CuPtRu core-frame nanostructures and PtRu catalysts. X-ray photoelectron spectroscopy reveals that all three elements become more electron rich in the frame nanostructures. Further refining the composition ratio of the CuPtRu alloyed dendritic frame nanostructures can lead to more efficient catalysts at a lower cost for MOR.
Facile Synthesis of Ptcu3 Alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Yaling Xiong,Yanling Ma,Zhuoqing Lin,Qingfeng Xu,Yucong Yan,Hui Zhang,Jianbo Wu,Deren Yang

DOI: https://doi.org/10.1039/c6ce01695b

IF: 3.756

2016-01-01

CrystEngComm

Abstract:PtCu alloy nanocrystals, especially for the PtCu3 component, hold great potential as catalysts in methanol oxidation reaction (MOR) owing to their promising catalytic properties arising from the bifunctional mechanism associated with Pt and Cu sites. However, Pt and Cu salt precursors are difficult to be co-reduced in a synthesis due to the large difference in their redox potential, because of which Pt or Cu nanocrystals are initially generated and then evolve into a PtCu alloy with remarkable variation of the PtCu component by underpotential deposition (UPD) and galvanic replacement, respectively. Here we report a facile method for the shape-controlled synthesis of PtCu3 alloy nanocrystals by co-reduction of Pt and Cu salt precursors using oleylamine (OAm) and N,N-dimethylformamide (DMF) as co-reducing agents at different temperatures. PtCu3 alloy hexapods with preferential overgrowth along the <100> direction are obtained at 220 degrees C through co-reduction reaction accompanied by Cl- ion induced underpotential deposition (UPD). Meanwhile, galvanic replacement between PtCu3 alloy nanocrystals and the Pt precursor co-exists with overgrowth induced by co-reduction reaction at 190 degrees C, eventually resulting in PtCu3 hollow nanoframes. Both the PtCu3 alloy hexapods and hollow nanoframes exhibit remarkably enhanced catalytic properties in terms of activity and stability towards MOR relative to the commercial Pt/C. Specifically, the PtCu3 alloy hexapods and hollow nanoframes show the highest specific (2.96 mA cm(-2)) activity and mass activity (1.861 mA mu g(Pt)(-1)) for MOR, respectively, which are 13.5 and 24.2 times higher than those of the commercial Pt/C. This enhancement can be attributed to their unique structures and the possible bifunctional mechanism between Pt and Cu.
Shaping Single-Crystalline Trimetallic Pt-Pd-Rh Nanocrystals Toward High-Efficiency C-C Splitting Of Ethanol In Conversion To Co2

Wei Zhu,Jun Ke,Si-Bo Wang,Jie Ren,Hong-Hui Wang,Zhi-You Zhou,Rui Si,Ya-Wen Zhang,Chun-Hua Yan

IF: 12.9

2015-01-01

ACS Catalysis

Abstract:Atomic-scale construction and high-throughput screening of robust multicomponent nanocatalysts with tunable well-defined surface structures and associated active sites for the ethanol electro-oxidation reaction (EOR) in high activity and selectivity, referring to C-C bond cleavage and full oxidation of ethanol as a clean and sustainable energy source, has remained a great challenge. Herein, we demonstrate a powerful conceptual approach to design, synthesize, and optimize single crystalline Pt-Pd-Rh nanocrystals of altered shapes and compositions for enhanced EOR performance, based on combined density functional theory (DFT) calculations and experiment study. We prepared (111) terminated Pt-Pd-Rh nanotruncated-octahedrons (NTOs) and (100) terminated Pt-Pd-Rh nanocubes (NCs) with varied compositions by regulating the reduction tendency of metal precursors in a facile hydrothermal method. Aided by DFT calculations, PtPdRh NTOs, PtPdRh NTO, and 8.8 nm PtPdRh NCs-200 were screened to be the best performing catalysts with the highest EOR activity (five times as much as that of commercial Pt black) at 0.5 V vs NHE. Among these catalysts, PtPdRh NTOs exhibited the highest selectivity to CO2 at 0.5 V and the noteworthy capability to fully oxidize ethanol at extremely low potential (0.35 V); 8.8 nm PtPdRh NCs-200 possessed the best durability. Morphology and surface composition correlated to the synergistic effect of three metals were verified to affect the EOR performance of well shaped Pt-Pd-Rh nanocrystals. Combined with in situ FTIR, it was deduced that appropriate surface composition and exposed facets were the key factors to the promoted capability in the cleavage of C-C bond down to low potential. Through adjusting surface composition and morphology of Pt-Pd-Rh nanocrystals with homogeneous element distribution, enhanced EOR performance was achieved in light of DFT simulations of the two elementary reactions (i.e., breakdown of C-C bond and oxidation of COad). This work has offered an effective and useful strategy to promote the reactivity of multicomponent heterogeneous nanocatalysts with optimized compositions and surface structures for many industrial catalytic processes.
Shaping Single-Crystalline Trimetallic Pt–Pd–Rh Nanocrystals Toward High-Efficiency C–C Splitting of Ethanol in Conversion to CO2

Wei Zhu,Jun Ke,Si-Bo Wang,Jie Ren,Hong-Hui Wang,Zhi-You Zhou,Rui Si,Ya-Wen Zhang,Chun-Hua Yan

DOI: https://doi.org/10.1021/cs5018419

IF: 12.9

2015-01-01

ACS Catalysis

Abstract:Atomic-scale construction and high-throughput screening of robust multicomponent nanocatalysts with tunable well-defined surface structures and associated active sites for the ethanol electro-oxidation reaction (EOR) in high activity and selectivity, referring to C–C bond cleavage and full oxidation of ethanol as a clean and sustainable energy source, has remained a great challenge. Herein, we demonstrate a powerful conceptual approach to design, synthesize, and optimize single-crystalline Pt–Pd–Rh nanocrystals of altered shapes and compositions for enhanced EOR performance, based on combined density functional theory (DFT) calculations and experiment study. We prepared (111)-terminated Pt–Pd–Rh nanotruncated-octahedrons (NTOs) and (100)-terminated Pt–Pd–Rh nanocubes (NCs) with varied-compositions by regulating the reduction tendency of metal precursors in a facile hydrothermal method. Aided by DFT calculations, Pt3PdRh NTOs, PtPdRh NTO, and 8.8 nm PtPdRh NCs-200 were screened to be the best performing catalysts with the highest EOR activity (five times as much as that of commercial Pt black) at 0.5 V vs NHE. Among these catalysts, PtPdRh NTOs exhibited the highest selectivity to CO2 at 0.5 V and the noteworthy capability to fully oxidize ethanol at extremely low potential (0.35 V); 8.8 nm PtPdRh NCs-200 possessed the best durability. Morphology and surface composition correlated to the synergistic effect of three metals were verified to affect the EOR performance of well-shaped Pt–Pd–Rh nanocrystals. Combined with in situ FTIR, it was deduced that appropriate surface composition and exposed facets were the key factors to the promoted capability in the cleavage of C–C bond down to low potential. Through adjusting surface composition and morphology of Pt–Pd–Rh nanocrystals with homogeneous element distribution, enhanced EOR performance was achieved in light of DFT simulations of the two elementary reactions (i.e., breakdown of C–C bond and oxidation of COad). This work has offered an effective and useful strategy to promote the reactivity of multicomponent heterogeneous nanocatalysts with optimized compositions and surface structures for many industrial catalytic processes.
Trimetallic PtSnRh Wavy Nanowires As Efficient Nanoelectrocatalysts for Alcohol Electrooxidation.

Kezhu Jiang,Lingzheng Bu,Pengtang Wang,Shaojun Guo,Xiaoqing Huang

DOI: https://doi.org/10.1021/acsami.5b04391

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:The design and creation of efficient catalysts for alcohol oxidation reaction has attracted great research attention because alcohols are promising fuels for direct fuel cell reactions because of their high energy density, easy storage, and transportation. We herein report an efficient strategy that allows the preparation of ternary PtSnM (M=Co, Ni, and Rh) wavy nanowires (WNWs) with ultrathin diameter of only around 2 nm and tunable compositions in high yield. Detailed catalytic studies show that all the ternary WNWs exhibit high performance for ethanol oxidation reaction (EOR) and methanol oxidation reaction (MOR), and their performance shows interesting composition-dependent electrocatalytic activity with PtSnRh WNWs having the best activity for both EOR and MOR. The PtSnRh WNWs are also more stable than commercial Pt/C catalyst, as revealed by long-time chronoamperometric (CA) measurements. The present work highlights the use of multimetallic WNWs as highly active and durable nanocatalysts in enhancing alcohol electrooxidation, which will open a new way in tuning 1D multimetallic nanostructures for boosting other fuel cell reactions, various heterogeneous reactions, and beyond.
PtCuNi Tetrahedra Catalysts with Tailored Surfaces for Efficient Alcohol Oxidation.

Jin Huang,Yang Liu,Mingjie Xu,Chengzhan Wan,Haotian Liu,Mufan Li,Zhihong Huang,Xiangfeng Duan,Xiaoqing Pan,Yu Huang

DOI: https://doi.org/10.1021/acs.nanolett.9b01937

IF: 10.8

2019-01-01

Nano Letters

Abstract:Direct methanol/ethanol alkaline fuel cells (DMAFCs/DEAFCs) represent an attractive mobile power generation technology. The methanol/ethanol oxidation reaction (MOR/EOR) often requires high-performance yet expensive Pt-based catalysts that may be easily poisoned. Herein, we report the development of PtCuNi tetrahedra electrocatalysts with optimized specific activity and mass activity for MOR and EOR. Our synthetic and structural characterizations show that these PtCuNi tetrahedra have Cu-rich core and PtNi-rich shell with tunable surface composition. Electrocatalytic studies demonstrate that Pt56Cu28Ni16 exhibits exceptional MOR and EOR specific activities of 14.0 ± 1.0 mA/cm2 and 11.2 ± 1.0 mA/cm2, respectively and record high mass activity of 7.0 ± 0.5 A/mgPt and 5.6 ± 0.6 A/mgPt, comparing favorably with the best MOR or EOR Pt alloy-based catalysts reported to date. Furthermore, we show that the unique core-shell tetrahedra configuration can also lead to considerably improved durability.
Morphology and Phase Controlled Construction of Pt-Ni Nanostructures for Efficient Electrocatalysis.

Jiabao Ding,Lingzheng Bu,Shaojun Guo,Zipeng Zhao,Enbo Zhu,Yu Huang,Xiaoqing Huang

DOI: https://doi.org/10.1021/acs.nanolett.6b00471

IF: 10.8

2016-01-01

Nano Letters

Abstract:Highly open metallic nanoframes represent an emerging class of new nanostructures for advanced catalytic applications due to their fancy outline and largely increased accessible surface area. However, to date, the creation of bimetallic nanoframes with tunable structure remains a challenge. Herein, we develop a simple yet efficient chemical method that allows the preparation of highly composition segregated Pt-Ni nanocrystals with controllable shape and high yield. The selective use of dodecyltrimethylammonium chloride (DTAC) and control of oleylamine (OM)/oleic acid (OA) ratio are critical to the controllable creation of highly composition segregated Pt-Ni nanocrystals. While DTAC mediates the compositional anisotropic growth, the OM/OA ratio controls the shapes of the obtained highly composition segregated Pt-Ni nanocrystals. To the best of our knowledge, this is the first report on composition segregated tetrahexahedral Pt-Ni NCs. Importantly, by simply treating the highly composition segregated Pt-Ni nanocrystals with acetic acid overnight, those solid Pt-Ni nanocrystals can be readily transformed into highly open Pt-Ni nanoframes with hardly changed shape and size. The resulting highly open Pt-Ni nanoframes are high-performance electrocatalysts for both oxygen reduction reaction and alcohol oxidations, which are far better than those of commercial Pt/C catalyst. Our results reported herein suggest that enhanced catalysts can be developed by engineering the structure/composition of the nanocrystals.
Triangular AgAu@Pt Core-Shell Nanoframes with a Dendritic Pt Shell and Enhanced Electrocatalytic Performance Toward the Methanol Oxidation Reaction.

Xiaoxiao Yan,Sijia Yu,Yawen Tang,Dongmei Sun,Lin Xu,Can Xue

DOI: https://doi.org/10.1039/c7nr08899j

IF: 6.7

2018-01-01

Nanoscale

Abstract:Triangular AgAu@Pt nanoframes with a dendritic Pt shell were synthesized by employing Ag nanoprisms as sacrificial templates. Due to the unique frame-like nanostructure and ternary components, the AgAu@Pt nanoframes exhibit impressive electrocatalytic performance toward the methanol oxidation reaction with much higher activity, and better anti-poisoning capability than commercial Pt/C catalysts.
Ultrathin Pd3 Pt1 Rh0.1 Nanorings with Strong C-C Bond Breaking Ability for the Ethanol Oxidation Reaction.

Hao Tian,Runxi Zhu,Peilin Deng,Jing Li,Wei Huang,Qi Chen,Ya-Qiong Su,Chunman Jia,Zhongxin Liu,Yijun Shen,Xinlong Tian

DOI: https://doi.org/10.1002/smll.202203506

IF: 13.3

2022-01-01

Small

Abstract:Ethanol as a fuel for direct ethanol fuel cells (DEFCs) has the advantages of being highly energetic, environmentally friendly, and low-cost, while the slow anodic ethanol oxidation reaction (EOR), intermediate poisoning effect, and incomplete oxidation of ethanol became obstacles to the development of DEFCs. Herein, a 2D ternary cyclic Pd3 Pt1 Rh0.1 nanorings (NRs) catalyst with efficient EOR performance is prepared via a facile one-pot solvothermal approach, and systematic studies are carried out to reveal the mechanisms of the enhanced performance and C-C bond selectivity. In particular, the optimized catalyst exhibits impressive mass activity, stability, toxicity resistance, and C-C bond cleavage ability. It's proposed that the considerable performance is attributed to the unique hollow structure, providing abundant active sites. The high toxicity resistance is not only attributed to the electronic modulation of the catalyst material by Rh atoms, but also depends on the excellent water activation properties of Rh, which contribute to the removal of intermediates, such as CO. In addition, the density functional theory calculations showed that the introduction of Rh significantly enhances the C-C bond cleavage ability of the catalyst, further improving the EOR activity.
Cyclic Penta-Twinned Rhodium Nanobranches As Superior Catalysts For Ethanol Electro-Oxidation

Jiawei Zhang,Jinyu Ye,Qiyuan Fan,Yating Jiang,Yifan Zhu,Huiqi Li,Zhenming Cao,Qin Kuang,Jun Cheng,Jun Zheng,Zhaoxiong Xie

DOI: https://doi.org/10.1021/jacs.8b03080

IF: 15

2018-01-01

Journal of the American Chemical Society

Abstract:Developing active and durable electro-catalysts toward ethanol oxidation reaction (EOR) with high selectivity toward the C-C bond cleavage is an important issue for the commercialization of direct ethanol fuel cell. Unfortunately, current ethanol oxidation electro-catalysts (e.g., Pt, Pd) still suffer from poor selectivity for direct oxidation of ethanol to CO2, and rapid activity degradation. Here we report a facile route to the synthesis of a new kind of cyclic penta-twinned (CPT) Rh nanostructures that are self-supported nanobranches (NBs) built with 1-dimension CPT nanorods as subunits. Structurally, the as-prepared Rh NBs possess high percentage of open {100} facets with significant CPT-induced lattice strains. With these unique structural characteristics, the as-prepared CPT Rh NBs exhibit outstanding electrocatalytic performance toward EOR in alkaline solution. Most strikingly, the selectivity of complete conversion ethanol to CO, on the CPT Rh NBs is measured to be as high as 14.5 +/- 1.1% at -0.15 V, far exceeding that for single crystal tetrahedral nanocrystals, icosahedral nanocrystals, and commercial Rh black, as well as majority of reported values for Pt or Pd-based electro-catalysts. By combining with density functional theory calculation, the effects of different structural features of Rh on EOR are definitively elucidated. It was found that the large amount of open Rh (100) facets dominantly contribute to the outstanding activity and exceptionally high selectivity, while the additional tensile strain on (100) planes can further boost the catalytic activity by enhancing the adsorption strength and lowering the reaction barrier of dehydrogenation process of ethanol. As a proof of concept, the present work shows that rationally optimizing surface and electronic structure of electrocatalysts by simultaneously engineering their surface and bulk structures is a promising strategy to promote the performance of electro-catalysts.
Highly open rhombic dodecahedral PtCu nanoframes.

Jiabao Ding,Xing Zhu,Lingzheng Bu,Jianlin Yao,Jun Guo,Shaojun Guo,Xiaoqing Huang

DOI: https://doi.org/10.1039/c5cc03190g

IF: 4.9

2015-01-01

Chemical Communications

Abstract:Herein, we report a facile strategy that allows one-pot preparation of highly open rhombic dodecahedral PtCu alloy nanoframes. Due to the highly open structures, the PtCu nanoframes exhibit enhanced catalytic performance in methanol electrooxidation, showing a new strategy to create highly active catalysts.
Pt4PdCu0.4 Alloy Nanoframes As Highly Efficient and Robust Bifunctional Electrocatalysts for Oxygen Reduction Reaction and Formic Acid Oxidation

Wei Ye,Shuangming Chen,Mengshan Ye,Chenhao Ren,Jun Ma,Ran Long,Chengming Wang,Jian Yang,Li Song,Yujie Xiong

DOI: https://doi.org/10.1016/j.nanoen.2017.07.025

IF: 17.6

2017-01-01

Nano Energy

Abstract:The development of bifunctional electrocatalysts for direct formic acid fuel cells requires low Pt usage, high activities in both oxygen reduction reaction (ORR) and formic acid oxidation (FAO), low CO production, and high resistance to CO. It remains a grand challenge to achieve all in a single material. Here we report a copperassisted selective deposition-etching approach to Pt4PdCu0.4 nanoframes that meet all the requirements, offered by structure and electronic structure effects. Impressively, the specific activities of Pt4PdCu0.4 nanoframes in ORR and FAO are 9.2 times and 10.2 times higher than commercial Pt/C, respectively, with excellent durability. This work provides insights into the catalyst design that one single material synthesis sets up a platform for simultaneously tuning surface and electronic structures.
Highly Active Pt3Rh/C Nanoparticles Towards Ethanol Electrooxidation. Influence of the Catalyst Structure

Caio V. S. Almeida,Denis S. Ferreira,Haoliang Huang,Ana C. Gaiotti,Giuseppe A. Camara,Andrea E. Russell,Katlin I. B. Eguiluz,Giancarlo R. Salazar-Banda

DOI: https://doi.org/10.1016/j.apcatb.2019.04.078

2019-01-01

Abstract:The electrochemical oxidation of ethanol results in the formation of strongly adsorbed intermediates. Pt-Rh catalysts are proposed as alternatives since they easy the C-C bond breaking. However, the effect of the Pt-Rh structure on the catalytic activity and selectivity to CO2 is not well understood. Here, we synthesised Pt/C and two different Pt-Rh/C catalyst architectures, an alloy (Pt3Rh/C) and a bimetallic mixture (Pt-3-Rh/C) to study the effect of catalyst structure on its catalytic activity and on the products formed during the ethanol oxidation in acid media. The nanoparticles were prepared by a modified polyol reduction method using ethylene glycol as a co-reducing agent and Pb as a material of sacrifice, to obtain very small and well-dispersed nanoparticles on the carbon support. Fourier transform infrared spectroscopy and derivative voltammetry was used to give insights about the ethanol oxidation mechanism occurring at the developed catalysts. The samples characterised by X-ray diffraction analysis showed distortions in the Pt lattice parameters for the Pt-Rh alloy structure due to the presence of Rh in the catalyst's composition. Transmission electron microscopy analyses indicate that nanoparticles were well-dispersed on a carbon support, with spherical shapes and small particle sizes (2-3 nm). in situ X-ray absorption spectroscopy data evidence that Pt-Rh interactions produce changes in the Pt 5d band vacancy. The electronic effect is maximized when Pt forms an alloy with Rh, resulting in the highest d-band vacancy of the Pt3Rh/C. The Pt3Rh/C catalyst showed the highest activity towards ethanol oxidation, presenting current densities in a quasi-steady-state condition (measured at 600 mV) around 5.2 times higher than the commercial Pt/C (Alfa Aesar). Moreover, the onset potential for ethanol oxidation shifts to more negative potentials (110 mV lower taken at 1 mA cm(-2)) was also observed. In situ FTIR data revealed that Pt/C catalyst favours the formation of acetic acid. The synergistic effect between Rh and the alloy structure results in an easier C-C bond breaking for Pt3Rh/C, in comparison to Pt-3-Rh mixture, thus favouring CO2 formation at lower potentials.
Modulating Electronic Structure of an Au‐Nanorod‐Core–PdPt‐Alloy‐Shell Catalyst for Efficient Alcohol Electro‐Oxidation

Xiaobo Yang,Qiang Wang,Shaojun Qing,Zhe Gao,Xili Tong,Nianjun Yang

DOI: https://doi.org/10.1002/aenm.202100812

IF: 27.8

2021-05-19

Advanced Energy Materials

Abstract:<p>Direct alcohol fuel cells (DAFCs) utilize alcohol electro-oxidation reactions (AORs) to provide electricity, where catalysts with optimal electronic structures are required to accelerate sluggish AORs. Herein, an electrocatalyst with an Au-nanorod core and a PdPt-alloy shell is designed. Its electronic structures are modulated through epitaxial growth of a PdPt-alloy shell on the Au-nanorod core, which exhibits a tensional strain effect and atomic steps. Three key problems of AORs are solved with this catalyst, including poor adsorption of alcohols on the catalyst, CO poisoning of the catalyst, and a high free energy barrier for the AORs. Taking methanol electro-oxidation reaction (MOR) as an example, this catalyst shows 9.4 times higher mass activity than the market-available Pt/C catalyst. Theoretic simulations prove that this catalyst has a low free energy barrier for the MOR, and strong adsorption of methanol but weaker adsorption of carbonaceous intermediates. The reasons behind this are the stretched geometric structure of the PdPt (100)-alloy shell and the optimized electronic structure of catalytic sites on the catalyst surface. Meanwhile, efficient electro-oxidation of ethanol, ethylene glycol, and glycerol is realized. This work paves the way to design and synthesize universal and efficient AOR catalysts for the construction of high-performance DAFCs.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Ternary Pt 9 RhFe x Nanoscale Alloys as Highly Efficient Catalysts with Enhanced Activity and Excellent CO-Poisoning Tolerance for Ethanol Oxidation.

Peng Wang,Shibin Yin,Ying Wen,Zhiqun Tian,Ningzhang Wang,Julian Key,Shuangbao Wang,Pei Kang Shen

DOI: https://doi.org/10.1021/acsami.6b14947

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:To address the problems of high cost and poor stability of anode catalysts in direct ethanol fuel cells (DEFCs), ternary nanoparticles PtRhFe (x = 1, 3, 5, 7, and 9) supported on carbon powders (XC-72R) have been synthesized via a facile method involving reduction by sodium borohydride followed by thermal annealing in N at ambient pressure. The catalysts are physically characterized by X-ray diffraction, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy, and their catalytic performance for the ethanol oxidation reaction (EOR) is evaluated by cyclic and linear scan voltammetry, CO-stripping voltammograms, and chronopotentiometry. All the PtRhFe/C catalysts of different atomic ratios produce high EOR catalytic activity. The catalyst of atomic ratio composition 9:1:3 (Pt/Rh/Fe) has the highest activity and excellent CO-poisoning tolerance. Moreover, the enhanced EOR catalytic activity on PtRhFe/C when compared to PtRh/C, PtFe/C, and Pt/C clearly demonstrates the presence of Fe improves catalytic performance. Notably, the onset potential for CO oxidation on PtRhFe/C (0.271 V) is ∼55, 75, and 191 mV more negative than on PtRh/C (0.326 V), PtFe/C (0.346 V), and Pt/C (0.462 V), respectively, which implies the presence of Fe atoms dramatically improves CO-poisoning tolerance. Meanwhile, compared to the commercial PtRu/C catalyst, the peak potential on PtRhFe/C for CO oxidation was just slightly changed after several thousand cycles, which shows high stability against the potential cycling. The possible mechanism by which Fe and Rh atoms facilitate the observed enhanced performance is also considered herein, and we conclude PtRhFe/C offers a promising anode catalyst for direct ethanol fuel cells.
Composition-driven Shape Evolution to Cu-rich PtCu Octahedral Alloy Nanocrystals As Superior Bifunctional Catalysts for Methanol Oxidation and Oxygen Reduction Reaction

Chaozhong Li,Taiyang Liu,Ting He,Bing Ni,Qiang Yuan,Xun Wang

DOI: https://doi.org/10.1039/c7nr09669k

IF: 6.7

2018-01-01

Nanoscale

Abstract:Synergetic effects between Pt and a cheap metal, downshift of the d-band center of Pt and the shape can boost the catalytic performance of Pt-based nanocrystals. Therefore, tailoring the shape and composition within the nanoscale is the key to designing a robust electrocatalyst in electrochemical energy conversion. Here, Cu-rich PtCu octahedral alloys achieved by a composition-driven shape evolution route have been used as outstanding bifunctional electrocatalysts for both methanol oxidation (MOR) and oxygen reduction reaction (ORR) in an acid medium. When benchmarked against commercial Pt black or Pt/C, for MOR, the specific activity/mass activity on Pt34.5Cu65.5 octahedra is 4.74/7.53 times higher than that on commercial Pt black; for ORR, the specific activity/mass activity on Pt34.5Cu65.5 octahedra is 7.7/4.2 times higher than that on commercial Pt/C. After a current-time test for 3600 s, the remaining mass activity on Pt34.5Cu65.5 octahedra is 35.5 times higher than that on commercial Pt black for MOR. After undergoing 5000 cycles for ORR, the remaining mass activity on Pt34.5Cu65.5 octahedra is 4.2 times higher than that on commercial Pt/C.
Facile Synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction

Xingqiao Wu,Xiao Li,Yucong Yan,Sai Luo,Jingbo Huang,Junjie Li,Deren Yang,Hui Zhang

DOI: https://doi.org/10.3389/fchem.2021.683450

IF: 5.5

2021-05-19

Frontiers in Chemistry

Abstract:Pt-based multimetallic nanorings with a hollow structure are attractive as advanced catalysts due to their fantastic structure feature. However, the general method for the synthesis of such unique nanostructures is still lack. Here we report the synthesis of Pd@PtM ( M = Rh, Ni, Pd, Cu) multimetallic nanorings by selective epitaxial growth of Pt alloyed shells on the periphery of Pd nanoplates in combination with oxidative etching of partial Pd in the interior. In situ generation of CO and benzoic acid arising from interfacial catalytic reactions between Pd nanoplates and benzaldehyde are critical to achieve high-quality Pt-based multimetallic nanorings. Specifically, the in-situ generated CO promotes the formation of Pt alloyed shells and their epitaxial growth on Pd nanoplates. In addition, the as-formed benzoic acid and residual oxygen are responsible for selective oxidative etching of partial Pd in the interior. When evaluated as electrocatalysts, the Pd@PtRh nanorings exhibit remarkably enhanced activity and stability for ethanol oxidation reaction (EOR) compared to the Pd@PtRh nanoplates and commercial Pt/C due to their hollow nanostructures.

chemistry, multidisciplinary

The Controllable Growth of PtCuRh Rhombic Dodecahedral Nanoframes As Efficient Catalysts for Alcohol Electrochemical Oxidation

Kinetically-controlled growth of cubic and octahedral Rh-Pd alloy oxygen reduction electrocatalysts with high activity and durability.

Two-step Etching Fabrication of Tunable Ternary Rhombic Dodecahedral Nanoframes for Enhanced Oxygen Reduction Electrocatalysis

Facile Synthesis of Pd@PtM (<i>M</i> = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction

Dendritic Core-Frame and Frame Multimetallic Rhombic Dodecahedra: A Comparison Study of Composition and Structure Effects on Electrocatalysis of Methanol Oxidation

Facile Synthesis of Ptcu3 Alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Shaping Single-Crystalline Trimetallic Pt-Pd-Rh Nanocrystals Toward High-Efficiency C-C Splitting Of Ethanol In Conversion To Co2

Shaping Single-Crystalline Trimetallic Pt–Pd–Rh Nanocrystals Toward High-Efficiency C–C Splitting of Ethanol in Conversion to CO2

Trimetallic PtSnRh Wavy Nanowires As Efficient Nanoelectrocatalysts for Alcohol Electrooxidation.

PtCuNi Tetrahedra Catalysts with Tailored Surfaces for Efficient Alcohol Oxidation.

Morphology and Phase Controlled Construction of Pt-Ni Nanostructures for Efficient Electrocatalysis.

Triangular AgAu@Pt Core-Shell Nanoframes with a Dendritic Pt Shell and Enhanced Electrocatalytic Performance Toward the Methanol Oxidation Reaction.

Ultrathin Pd3 Pt1 Rh0.1 Nanorings with Strong C-C Bond Breaking Ability for the Ethanol Oxidation Reaction.

Cyclic Penta-Twinned Rhodium Nanobranches As Superior Catalysts For Ethanol Electro-Oxidation

Highly open rhombic dodecahedral PtCu nanoframes.

Pt4PdCu0.4 Alloy Nanoframes As Highly Efficient and Robust Bifunctional Electrocatalysts for Oxygen Reduction Reaction and Formic Acid Oxidation

Highly Active Pt3Rh/C Nanoparticles Towards Ethanol Electrooxidation. Influence of the Catalyst Structure

Modulating Electronic Structure of an Au‐Nanorod‐Core–PdPt‐Alloy‐Shell Catalyst for Efficient Alcohol Electro‐Oxidation

Ternary Pt 9 RhFe x Nanoscale Alloys as Highly Efficient Catalysts with Enhanced Activity and Excellent CO-Poisoning Tolerance for Ethanol Oxidation.

Composition-driven Shape Evolution to Cu-rich PtCu Octahedral Alloy Nanocrystals As Superior Bifunctional Catalysts for Methanol Oxidation and Oxygen Reduction Reaction

Facile Synthesis of Pd@PtM (M = Rh, Ni, Pd, Cu) Multimetallic Nanorings as Efficient Catalysts for Ethanol Oxidation Reaction