Abstract:Graphene has superhigh thermal conductivity up to 5000 W/(m·K), extremely thin thickness, superhigh mechanical strength and nano-lamellar structure with low interlayer shear strength, making it possess great potential in minimum quantity lubrication (MQL) grinding. Meanwhile, ionic liquids (ILs) have higher thermal conductivity and better thermal stability than vegetable oils, which are frequently used as MQL grinding fluids. And ILs have extremely low vapor pressure, thereby avoiding film boiling in grinding. These excellent properties make ILs also have immense potential in MQL grinding. However, the grinding performance of graphene and ionic liquid mixed fluid under nanofluid minimum quantity lubrication (NMQL), and its tribological mechanism on abrasive grain/workpiece grinding interface, are still unclear. This research firstly evaluates the grinding performance of graphene and ionic liquid mixed nanofluids (graphene/IL nanofluids) under NMQL experimentally. The evaluation shows that graphene/IL nanofluids can further strengthen both the cooling and lubricating performances compared with MQL grinding using ILs only. The specific grinding energy and grinding force ratio can be reduced by over 40% at grinding depth of 10 μm. Workpiece machined surface roughness can be decreased by over 10%, and grinding temperature can be lowered over 50 °C at grinding depth of 30 μm. Aiming at the unclear tribological mechanism of graphene/IL nanofluids, molecular dynamics simulations for abrasive grain/workpiece grinding interface are performed to explore the formation mechanism of physical adsorption film. The simulations show that the grinding interface is in a boundary lubrication state. IL molecules absorb in groove-like fractures on grain wear flat face to form boundary lubrication film, and graphene nanosheets can enter into the grinding interface to further decrease the contact area between abrasive grain and workpiece. Compared with MQL grinding, the average tangential grinding force of graphene/IL nanofluids can decrease up to 10.8%. The interlayer shear effect and low interlayer shear strength of graphene nanosheets are the principal causes of enhanced lubricating performance on the grinding interface. EDS and XPS analyses are further carried out to explore the formation mechanism of chemical reaction film. The analyses show that IL base fluid happens chemical reactions with workpiece material, producing FeF 2 , CrF 3 , and BN. The fresh machined surface of workpiece is oxidized by air, producing NiO, Cr 2 O 3 and Fe 2 O 3 . The chemical reaction film is constituted by fluorides, nitrides and oxides together. The combined action of physical adsorption film and chemical reaction film make graphene/IL nanofluids obtain excellent grinding performance.

Tribological Properties under the Grinding Wheel and Workpiece Interface by Using Graphene Nanofluid Lubricant

Tribological Mechanism of Graphene and Ionic Liquid Mixed Fluid on Grinding Interface under Nanofluid Minimum Quantity Lubrication

EHTT2022-Tribological Mechanism of Graphene/Ionic Liquid Nanofluid on Grain/Workpiece Grinding Interface under Nanofluid Minimum Quantity Lubrication

Tribological mechanism of carbon group nanofluids on grinding interface under minimum quantity lubrication based on molecular dynamic simulation

Experimental Study of Lubricating Property at Grinding Wheel/Workpiece Interface Under NMQL Grinding

Comparative Study on the Lubrication of Ti3C2TX MXene and Graphene Oxide Nanofluids for Titanium Alloys

Grain Refinement: A Mechanism for Graphene Nanoplatelets to Reduce Friction and Wear of Ni3al Matrix Self-Lubricating Composites

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel

Investigation of a green nanofluid added with graphene and Al 2 O 3 nano-additives for grinding hard-to-cut materials

Experimental Investigation on the Tribological and Rheological Properties of Graphene and FMWCNT Based Nanolubricants with CTAB Surfactants

Synergistic friction-reduction and wear-resistance mechanism of 3D graphene and SiO2 nanoblend at harsh friction interface

Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti–6Al–4V

Effect of Graphene Nanoplate Addition on the Tribological Performance of Ni3Al Matrix Composites

Graphene As a Nanofiller for Enhancing the Tribological Properties and Thermal Conductivity of Base Grease

Influence of Lubricants on Wear and Self-Lubricating Mechanisms of Ni3al Matrix Self-Lubricating Composites

Improved Tribological Properties of Si3N4/GCr15 Sliding Pairs with Few Layer Graphene As Oil Additives

Lubrication Mechanism of Graphene Nanoplates As Oil Additives for Ceramics/steel Sliding Components

Nanostructured tribolayer-dependent lubricity of graphene and modified graphene nanoflakes on sliding steel surfaces in humid air

Synergistic Friction-Reducing and Anti-Wear Behaviors of Graphene with Micro- and Nano-Crystalline Diamond Films

Tribological Performance of NiAl Self-lubricating Matrix Composite with Addition of Graphene at Different Loads

MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces