Abstract:Composite sandwich beams with a carbon fiber reinforced polymer (CFRP) square honeycomb core were designed and fabricated by using the interlocking method. The dynamic response and failure mechanism of fully-clamped and simply- supported sandwich beams subjected to low-velocity impact were investigated experimentally and the corresponding failure modes of the sandwich beams were obtained. Meanwhile, the damage evolvement process and the failure mechanism were analyzed in detail. Influences of the impact velocity, boundary conditions, the mass distributions of face sheets and the direction of the slots on the failure modes and load-carrying capacity of the sandwich beams were explored. The low-velocity impact experiments of composites specimens with two kinds of boundary conditions were carried out by using the drop-hammer impact test system. Three kinds of initial impact velocity were considered for the simply-supported and the fully- clamped sandwich beams sandwich beams, respectively. In the experiments, the time history curves of the impact load and the midspan deflection of the specimens were recorded by a load cell and a laser displacement sensor. Meanwhile, the deformation processes of the sandwich beams were captured by a high-speed camera. The experimental results show that the directions for the slots of the long ribs have significant influence on the failure modes of the sandwich beams. The sandwich core with the upward slots at the midspan has compression deformation whilst the cracking failure along the direction of the downward slots at the midspan is observed due to the tension, which results in the face-sheet debonding and rib fracture successively. It is found that for the same mass, the design of the thicker upper face sheet can enhance the impact resistance of the sandwich beams. The peak load and load-carrying capacity of the sandwich beams increase with increasing the impact velocity. The fully-clamped boundary conditions make the sandwich beams exhibit hardening post-failure behaviors obviously. After the initial failure at the midspan, the fully-clamped ends of the cores and the face-sheets of the sandwich beams experience the fracture failure.

Residual flexural properties of CFRP sandwich structures with aluminum honeycomb cores after low-velocity impact

The impact and post-impact flexural behaviors of CFRP/aluminum-honeycomb sandwich

Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact

Study on low-velocity impact response and residual strength of ultralight all-CFRP sandwich structure

Lattice Truss Core Sandwich Structures With Al Lattice Truss Core And Cfrp Composite Fachesheets Under Impact Loads

Response of Sandwich Structures with Pyramidal Truss Cores under the Compression and Impact Loading

Low-velocity impact response and failure mechanism of CFRP sandwich beams with a square honeycomb core fabricated by the interlocking method

Low-velocity impact resistance of all composite cylindrical shell panels with a foam filled honeycomb core: Theoretical and experimental investigation

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Impact responses and residual flexural properties of narrow CFRP laminates

Deformation and Failure of Hybrid Composite Sandwich Beams with a Metal Foam Core under Quasi-Static Load and Low-Velocity Impact

On low-velocity impact response of foam-core sandwich panels

Impact resistance of composite circular corrugated core sandwich structures

The influence of asymmetric faces on low-velocity impact failure of CFRP/aluminum foam composite sandwich beams

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

Experiment and finite element analysis of lattice reinforced composite sandwich panels subjected to low-velocity impact

Mechanical Properties and Damage Failure of Carbon Fiber Reinforced Polymer Composite Sandwich Structure with Square Honeycomb Core Using the Interlocking Method

Low-velocity Impact Behavior and Damage Mechanisms of Honeycomb Sandwich Structures with Elastomeric Interlayers in CFRP Skins

Low-velocity Perforation Behavior of Composite Sandwich Panels with Aluminum Foam Core

Damage Resistance of Honeycomb Sandwich Composites under Low-Energy Impact

Effect of Core Densities on Quasi-Static and Low-Velocity Impact Behaviors of AFRP-aluminum Foam Hybrid Sandwich Beams