Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

A Streamlined Approach to Hybrid-Chemistry Modeling for a Low Cetane-Number Alternative Jet Fuel

Entropy production and element conservation in the quasi-steady-state approximation

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Shock Tube Measurements of Species Time-Histories during Jet Fuel Pyrolysis and Oxidation

HEEDS Optimized HyChem Mechanisms

Revised HyChem modeling combustion chemistry of air-breathing high-energy density jet fuel: JP-10

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Automatic Extension of a Semi-Detailed Synthetic Fuel Reaction Mechanism

Development of a Skeletal Mechanism for Aviation Kerosene Surrogate Fuel

A New Jet Fuel Surrogate Formulated by Emulating the Distribution of Pyrolysis Products Obtained from Shock Tube Experiments

Development of Physical-Chemical Surrogate Models and Skeletal Mechanisms for the Combustion Simulation of Several Jet Fuels

Development of a surrogate and its comprehensive compact chemical kinetic mechanism for the combustion of Alcohol-To-Jet fuel

A shock tube study of jet fuel pyrolysis and ignition at elevated pressures and temperatures

A Data-Based Hybrid Chemistry Acceleration Framework for the Low-Temperature Oxidation of Complex Fuels

Detailed combustion chemical mechanism for surrogates of representative jet fuels

Hydrocarbons Heterogeneous Pyrolysis: Experiments and Modeling for Scramjet Thermal Management

Machine Learning Approaches to Learn HyChem Models

’Overdose’ of vecuronium

Multi-timescale and Correlated Dynamic Adaptive Chemistry and Transport (CO-DACT) Modeling of Ignition and Flame Propagation of Jet Fuel Surrogate Mixtures

Development and validation of a detailed kinetic model for RP-3 aviation fuel based on a surrogate formulated by emulating macroscopic properties and microscopic structure