Abstract:As a conductive polymer with great potential, poly(3,4-ethylenedioxythiophene) (PEDOT) has been developed as a high-rate supercapacitor electrode but stores less energy due to its limited theoretical capacity. In this work, the growth of PEDOT nanotube arrays on flexible Ti foil () is reported with significantly enhanced performance by incorporating highly pseudocapacitive polyaniline (PANi). The as-prepared nanotube arrays offer a three-dimensionally conductive network. Such arrays have been successfully connected with each other through the uniform coating of PANi onto the surface, thus contributing a substantial pseudocapacitance. By constructing the above novel structure, the hybrid electrode delivers a nearly 10 times enhancement of areal capacitance (2876 mF cm–2 at 5 mA cm–2) together with a remarkable rate performance (85% capacitance retention at 100 mA cm–2). Moreover, a flexible supercapacitor assembled with the electrode also exhibits a high-rate property with a relaxation time constant as small as 0.83 s (τ0 = 0.83 s) and a volumetric energy density of 15.9 mW h cm–3 under the power density of 178.9 mW cm–3. The cycling stability of such a device is also remarkable, indicating the great advantages of the electrode. More gratifying, such device can endure continuous bending at a maximum angle of 145° for 200 cycles. The present work can provide theoretical and technical support for the design and development of polymer-based flexible electrodes which possess both large areal capacitance and fast charging–discharging rates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09365?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09365</a>.SEM images of , high-resolution SEM image of , XRD patterns of PEDOT and PEDOT-PANi nanotubes, conductivity and areal capacitance of and , CV of Ti foil and , galvanostatic charge–discharge profiles of and at 50 and 100 mA cm–2, CV and galvanostatic charge–discharge of with different mass loadings of PANi, galvanostatic charge–discharge of solid-state supercapacitors, digital photos and CV curves of the capacitor during diverse bending states, and electrochemical performance comparison of the solid-state capacitor with previous results (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09365/suppl_file/sc0c09365_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Flexible and Low Capacitance Loss Supercapacitor Electrode Based on Hybridizing Decentralized Conjugated Polymer Chains with MXene

Highly Flexible, Freestanding Supercapacitor Electrode with Enhanced Performance Obtained by Hybridizing Polypyrrole Chains with MXene

Sandwich-like high-load MXene/polyaniline film electrodes with ultrahigh volumetric capacitance for flexible supercapacitors.

High Stability Supercapacitors Based on MXene/Spherical G-Ppy Composite Electrodes

Facile design of structurally robust, highly conductive and well-flexible hybrid film based on MXene, cellulose nanofiber and poly (3,4-ethylenedioxythiphoenes):polystyrene sulfonate for supercapacitors

Self-Supporting, Binder-Free, and Flexible Ti 3 C 2 T x MXene-Based Supercapacitor Electrode with Improved Electrochemical Performance

Self-Supporting, Binder-Free, and Flexible Ti<sub>3</sub>C<sub>2</sub>TX MXene-Based Supercapacitor Electrode with Improved Electrochemical Performance

Construction of porous and free-standing film electrodes composed of MXene, carbon nanocoils and PEDOT:PSS for high-performance flexible supercapacitors

Conductive MXene/Polymer Composites for Transparent Flexible Supercapacitors

MXene/Graphdiyne nanotube composite films for Free-Standing and flexible Solid-State supercapacitor

MnO 2 /polypyrrole-electrodeposited carbonized paper fiber-based for flexible asymmetric supercapacitors with high electrochemical and mechanical reliability

3D Cross-linked Ti3C2Tx-Ca-SA films with expanded Ti3C2Tx interlayer spacing as freestanding electrode for all-solid-state flexible pseudocapacitor

Fabrication of PANI@Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Flexible and Alternately Layered High‐Loading Film Electrode based on 3D Carbon Nanocoils and PEDOT:PSS for High‐Energy‐Density Supercapacitor

Self-assembled high polypyrrole loading flexible paper-based electrodes for high-performance supercapacitors

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

A Free-Standing Polymer Polypyrrole/Cellulose Composite Film via Spatial-Confined Interfacial Electrodeposition for Flexible Supercapacitors

Conductive polymer electrode materials with excellent mechanical and electrochemical properties for flexible supercapacitor

Highly Flexible PEDOT Film Assembled with Solution-Processed Nanowires for High-Rate and Long-Life Solid-State Supercapacitors

Connecting PEDOT Nanotube Arrays by Polyaniline Coating toward a Flexible and High-Rate Supercapacitor

Highly capacitive MXene film by incorporating poly(3,4-ethylenedioxythiophene) hollow spheres prepared through an interfacial oxidation polymerization