Abstract:Inertial microfluidic technologies have proven effective for particle focusing and separation in many microchannels, typically the channels with the rectangular and trapezoidal shapes. To advance particle focusing in complex channels, we propose a spiral channel combining rectangular and concave cross-sections for high-resolution particle and cell focusing and separation. Numerical simulations were conducted to illustrate the effects of channel geometry on secondary flow distribution and particle focusing positions. The simulation shows the concave cross-section generates two asymmetrical Dean vortices skewing towards the inner and outer channel walls, resulting to stronger flow velocity magnitudes near the walls than the channel center. Consequently, larger particles focus near the inner wall, while smaller particles are trapped closer to the outer wall under the influence of the stronger velocity magnitude near the walls. A microfluidic chip with the proposed channel geometry, along with a traditional rectangular channel, was fabricated by 3D printing and PDMS casting. Fluorescent microbeads were used to investigate inertial focusing and separation behaviors in the microfluidic chips. Experimental results show that the concave channel facilitates particle focusing or trapping much closer to the walls than the traditional rectangular channel, achieving better separation resolution. Finally, the proposed channel was applied to separate lung cancer A549 cells from human blood, achieving a cancer cell recovery rate of ~ 84.78% (enrichment ratio over 820-fold) and a blood cell rejection rate of ~ 99.88%. This innovative channel design in inertial microfluidics offers new insights for enhanced particle focusing and holds significant promise for cell manipulation with improved separation resolution.

2x2 Microparticles Curvilinear Transport Channel Based On Dual Self-Accelerating Beams

Optical Transportation and Accumulation of Microparticles by Self-Accelerating Cusp Beams

All-Fiber Self-Accelerating Bessel-Like Beam Generator and Its Application

All-fiber Self-Accelerating Bessel-like Beam for Optical Trapping Application

A Novel Method to Generate Dual Self-Accelerating Bessel-like Beams: Simulation and Experiment

Mode-division-multiplexing Technology for a Micro Particle Trapping and Launching

A Micro-Particle Launching Apparatus Based on Mode-Division-Multiplexing Technology

Self-Accelerating Bessel-Like Beam Generated by Graded-Index Multimode Fiber

Optical Separation and Controllable Delivery of Cells from Particle and Cell Mixture

Collective Shuttling Of Attracting Particles In Asymmetric Narrow Channels

Guiding Particles along Arbitrary Trajectories by Circular Pearcey-like Vortex Beams

Generation of nonparaxial self-accelerating beams using pendant droplets

A Novel Method to Generate a Self-Accelerating Bessel-like Beam Based on Graded Index Multimode Optical Fiber

Tuning particle inertial separation in sinusoidal channels by embedding periodic obstacle microstructures.

Nano-Conveyor Belt on 2D Microsphere Arrays Levitated by Optical Quasi-Standing Wave

Long Distance and Direction-controllable Conveyor for Automatic Particle Transportation Based on Optical Tweezers

Conical Hollow Microhelices with Superior Swimming Capabilities for Targeted Cargo Delivery.

Optical Trajectory Transport Device Based on a Three-Core Fiber

Spiral microchannels with concave cross-section for enhanced cancer cell inertial separation

Size-Based Separation of Particles and Cells Utilizing Viscoelastic Effects in Straight Microchannels.

Multiple Particles 3-D Trap Based on All-Fiber Bessel Optical Probe