Abstract:Deployment of Lithium-sulfur (Li-S) battery has been hindered by the low practically achievable energy and limited cycle life, although significant advances have been demonstrated in material development and fundamental understandings.1 There are still challenges in pursuing high energy Li-S battery lacking of high energy cathodes, stable anodes and electrolytes, particularly scientific knowledge bridging fundamental research and practical deployment. Sulfur cathodes host active materials for Li+ storage and thus determine the total capacity of the system. However, specific energy of the Li-S battery is highly dependent on the whole weight of the system, of which electrolyte takes a largest weight fraction but contributes nothing to energy. So rational electrode architecture design is of significant importance to not only realize the high sulfur mass loading but also decrease the electrolyte uptake to a very limited level.2 This is very challenging but the only pathway to the target of high energy Li-S battery for practical applications. In an attempt to addressing the key challenges in achieving high energy Li-S battery, our efforts are focused on the understanding of fundamental reasons that affect sulfur utilization in high loading electrodes and with lean amount electrolytes. Based on our understanding, rational cathode design including electrode materials, binders and electrode architectures has been proposed and demonstrated for high loading electrode preparation. At the meeting, we will present our recent progresses on the fundamental understanding and practical demonstration of high energy Li-S batteries. References (1) Manthiram A., Fu Y., Chung S.-H., Zu C.,Su Y.-S., Chem. Rev. (Washington, DC, U. S.) 2014, 114, 11751-11787. (2) Lv D., Zheng J., Li Q., Xie X., Ferrara S., Nie Z., Mehdi L. B., Browning N. D., Zhang J. G.,Graff G. L., Adv. Energy Mater. 2015, 5, 1402290.

Rationalizing Electrocatalysis of Li–S Chemistry by Mediator Design: Progress and Prospects

Lithium‐Sulfur Batteries: Heterogeneous/Homogeneous Mediators for High‐Energy‐Density Lithium–Sulfur Batteries: Progress and Prospects (adv. Funct. Mater. 38/2018)

Heterogeneous/Homogeneous Mediators for High‐Energy‐Density Lithium–Sulfur Batteries: Progress and Prospects

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Theoretical Calculations Facilitating Catalysis for Advanced Lithium-Sulfur Batteries

High-Performance Li-S Batteries Boosted by Redox Mediators: A Review and Prospects

Rational design of bidirectional electrocatalysts and accelerated sulfur redox reactions in lithium-sulfur batteries

Full-Range Redox Mediation on Sulfur Redox Kinetics for High-Performance Lithium-Sulfur Batteries

Unraveling the Catalytic Redox Mechanism of Lithium–sulfur Batteries Through Advanced In-Situ/operando Characterizations

Rational Design of the Cathode Catalysts for High Performance Lithium–sulfur Batteries

Electrochemical Kinetic Modulators in Lithium–Sulfur Batteries: From Defect‐Rich Catalysts to Single Atomic Catalysts

Adsorption‐Catalysis Design in the Lithium‐Sulfur Battery

Redox Mediator: A New Strategy in Designing Cathode for Prompting Redox Process of Li-S Batteries.

Optimizing Redox Reactions in Aprotic Lithium–Sulfur Batteries

Lithium Sulfide Batteries: Addressing the Kinetic Barriers and High First Charge Overpotential

The Catalyst Design for Lithium‐Sulfur Batteries: Roles and Routes

Rational Design of High Energy Sulfur Cathodes for Lithium-Sulfur Batteries

Steering Bidirectional Sulfur Redox via Geometric/Electronic Mediator Comodulation for Li-S Batteries

Designing metal sulfide-based cathodes and separators for suppressing polysulfide shuttling in lithium-sulfur batteries

Manipulating Electrocatalytic Li<sub>2</sub>S Redox via Selective Dual-Defect Engineering for Li-S Batteries

"Dual Mediator System" Enables Efficient and Persistent Regulation toward Sulfur Redox Conversion in Lithium-Sulfur Batteries