Abstract:In this paper, Conjugate Heat Transfer (CHT) numerical simulation method is implemented to estimate the different sources of steady state errors and their variation characteristics for a typical shielded thermocouple working at free-stream Mach numbers 0.2, 0.3, 0.4, 0.5 and 0.6. 1D physical models with high prediction accuracy and wide applicability, including velocity error model conduction error model and radiation error model, are proposed. Based on the flow topologies in the shield tube and the Re-Cp-b chart by Williamson, the Mach number of the flow around the thermocouple junction is modeled and then a velocity error model is proposed. Temperature deviations between the velocity error model and the CHT simulation results are less than 0.271K. Considering the actual heat transfer process, a conduction error model is proposed by modeling the heat transfer of the shielded thermocouple as the heat transfer of two fins in series arrangement and propounding a semi-empirical method for predicting the average flow temperature around the shield tube. Temperature deviations between the conduction error model and the CHT simulation results are less than 1.32 K. As for radiation error modeling, the average temperature of the shield tube surface is reasonably estimated, and an equivalent method is introduced to explicitly solve the temperature of shield tube surface with high accuracy. Based on aforementioned parameters, a radiation error model is proposed by evaluating the convective, conductive and radiative heat transfer mechanisms prevalent in the thermocouple junction, shield, duct and flow. Temperature deviations between the radiation model and the CHT simulation results are less than 1.74 K; In order to vindicate the applicability of the proposed models, they are verified at free-stream Mach numbers of 0.1, 0.35 and 0.7. The results show that these models can be used to predict the shielded thermocouple's steady state errors accurately in a wide Mach number region. (C) 2017 Elsevier Ltd. All rights reserved.

Numerical Investigation on Metrological Fidelity of a Shielded Thermocouple Probe and the Effects of Geometrical Parameters

Numerical Simulation for Vibration of Interferometric Probein Wet Steam Flow Field

Development of a Gas Flow Sensor Based on FS5 Hot-Film Probe

Numerical Modeling of Steady State Errors for Shielded Thermocouples Based on Conjugate Heat Transfer Analysis

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Fractional-order modeling of dynamic response for shielded total temperature probes considering unsteady aerothermal processes

Numerical Simulation and Experimental Research on Measurement Characteristics of Elbow Meter

Numerical Study of the Thermal Thermopile Flow Sensor

Use of finite element analysis to optimize probe design for double sensor method-based thermometer

Experimental and Numerical Analysis of a Novel Flow Conditioner for Accuracy Improvement of Ultrasonic Gas Flowmeters

Design and performance verification of thermal protection structure of high temperature probe in aeroengine

Numerical Simulation of Dynamic Properties of Thin-Film Temperature Sensor Inside PEMFC

Investigation on the Effective Measures for Improving the Performance of Calorimetric Microflow Sensor

Measuring tube structure optimization of coriolis mass flowmeter with liquid hydrogen

Systematic Study of Packaging Designs on the Performance of CMOS Thermoresistive Micro Calorimetric Flow Sensors

Optimization of a Wearable Device for Core Body Temperature Monitoring Based on the Dual-Heat-Flux Model

Numerical analysis and experimental comparison of temperature-compensation method for large length–diameter ratio thermal mass flowmeter

Design of a High-Precision Heat Flow Meter to Characterize the Thermoelectric Module

Numerical Simulation of a New Probe for the Alternate Cooling and Heating of a Subcutaneous Mouse Tumor Model

Computational Fluid Dynamic (cfd) Investigation of Thermal Uniformity in A Thermal Cycling Based Calibration Chamber for Mems