On the creep mechanisms and macroscopic creep rate modeling of high-uranium-density composite fuels
Zhexiao Xie,Chunyu Yin,Jing Zhang,Yongjun Jiao,Guochen Ding,Qingfeng Yang,Shurong Ding,Ping Chen
DOI: https://doi.org/10.1016/j.jnucmat.2023.154679
IF: 3.555
2023-08-13
Journal of Nuclear Materials
Abstract:UN-U 3 Si 2 composite fuel is a promising candidate of Accident Tolerant Fuels (ATFs). Its in-pile creep performance will have an important impact on the irradiation-induced thermo-mechanical coupling behavior and safety of fuel elements. Based on the existing mechanism-based creep models of UN and U 3 Si 2 , the finite element analysis was performed for the multi-scale creep behaviors of various UN-U 3 Si 2 composite fuels, and the influences of the U 3 Si 2 volume fraction, applied stress, temperature, fission rate, and grain size were investigated. The dominant creep mechanisms under different conditions were proposed, and the mechanism-based macroscopic creep rate model for the UN-U 3 Si 2 composite fuels were correspondingly developed, quantitatively correlating with the macroscopic creep rate with the U 3 Si 2 volume fraction, temperature, fission rate and equivalent stress. The creep rate predictions obtained by this model were in good agreement with the results of the finite element simulation. The research results indicate that: (1) the irradiation or thermal diffusion creep contributions from the UN and U 3 Si 2 phases were dominated under various conditions; (2) the dislocation creep contributions from the dispersed-phase of U 3 Si 2 were appreciable at the temperatures ranged from 500 K to 1300 K, while those of the matrix-phase of UN appeared only at an extremely high temperature of 1300 K; (3) different from the ordinary inert-matrix dispersion fuels, the macroscopic creep rates of UN-U 3 Si 2 composite fuels were predicted to be almost independent of burnup, due to the slight difference in the irradiation swelling of UN and U 3 Si 2 ; (4) the total creep contribution proportions of the U 3 Si 2 or UN phase were almost equal to the initial volume fractions, while the creep contribution ratios within the UN or U 3 Si 2 phase vary under different conditions. The evolutions of various creep contributions with the fission density were attributed to the fuel-swelling induced additional stresses.
materials science, multidisciplinary,nuclear science & technology