Abstract:Micro-powered wireless embedded devices are widely used in many application domains. Their efficiency in practice, however, is significantly constrained by the dual limitations of low harvesting rates and tiny energy buffer. Recent research presents a network stack that efficiently fragments a large packet into many smaller packets that can fit within the available energy in the energy buffer of limited size. While this fragmentation technique represents a major step forward in solving the minuscule energy budget problem, it also introduces a tremendous practical challenge where potentially many fragmented packets belonging to different devices may contend for the communication channel. Designing purely heuristic-based packet transmission protocol is undesirable because the resulting per-packet and end-to-end transmission delay are unknown, thus causing unpredictable system performance which is unacceptable for many applications with real-time constraints. In this paper, we first formulate this packet transmission scheduling problem considering physical properties of the charging and transmission processes. We then develop a novel packet prioritization and transmission protocol NERF that yields tight and predictable delay bounds for transmitting packets from multiple micropowered devices to a charger. We have implemented our protoco on top of the WISP 4.1 platform and the SPEEDWAY RFID READER, and conducted validation experiments. Our experiments validate the correctness of our implementation and show that NERF can reduce the total collection delay by 40% when compared to an existing protocol ALOHA. We have also performed extensive data trace-driven simulations. Simulation results demonstrate the effectiveness of our proposed protocol. On average, our protocol yields an over 30%improvement in terms of runtime transmission delay compared to existing methods, while being able to guarantee tight and provable response time bounds.

An Address Event Representation Circuits Design with Rotation Priority Against Pulse Collision

An Asynchronous AER Circuits with Rotation Priority Tree Arbiter for Neuromorphic Hardware with Analog Neuron.

Enabling Predictable Wireless Data Collection in Severe Energy Harvesting Environments

A Scalable Area-Efficient Low-Delay Asynchronous AER Circuits Design for Neuromorphic Chips

Study and realization of EPA communication schedule algorithm based on parallel processing

Logical Architecture Design of Integrated Electronic System with High Real-Time and Reliability in ZDPS-2 Pico-Satellite

Anti-jamming Timing Channels for Wireless Networks

RAPA: reliability-aware priority arbitration strategy for network on chip.

A bi-directional Address-Event transceiver block for low-latency inter-chip communication in neuromorphic systems

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

Design And Evaluation Of Event-Driven Networked Realtime Control Systems With Iec Function Blocks

Analysis and Design of 8-Bit CMOS Priority Encoders

Synthesis and Optimization of Asynchronous Dual Rail Encoded Circuits Based on Partial Acknowledgement

A Dynamic Priority Arbiter for Network-on-Chip

A Separate Design Principle for Priority-Aware Packet Collection in Industrial Cyber-Physical Systems

A Priority-Aware Multiqueue NIC Design

Design techniques for reference clock jitter optimization for high speed PHYs

Design of multi-channel synchronization signal acquisition method based on FPGA

Random Access Protocol Design and Analysis for Neural Interfaces under Non-Saturated Regime

A Low Latency Implementation Scheme of Serial RapidIO Endpoint

The design of the merging unit of real-time and synchronicity based on EP1C3T144 chip