Abstract:Parameter values adopted in railway engineering analysis at present are generally obtained through triaxial tests, whereas the remarkable difference between the actual stress path during train passage and the loading path in cyclic triaxial tests may lead to inaccurate predictions and even engineering problems. Published researches show that the actual stress path probably contains principal stress rotation(PSR), which has a sisgnificant influence on the mechanical response of soil. However, the conventional approach, i.e. cyclic triaxial test is not efficient in simulating this complicated stress path involving PSR. Instead, hollow cylinder test with cyclic shear stress has been proved to be an excellent selection for PSR study. In order to obtain reliable stress path for guiding hollow cylinder tests, three-dimensional calculation for a certain urban railway is carried out; and the distribution regularity of cyclic stress amplitudes, cycle numbers and PSR under train loads is analyzed. Furthermore, a series of cyclic torsional shear tests on hollow cylinder samples is employed to simulate the complex stress path and to research the deformation and pore pressure accumulation properties of saturated soft clay. Considering stress in foundation soil decreasing along with the depth increasing, various cyclic stress amplitudes corresponding to different depths are adopted in this experiment study. Three-dimensional calculation shows that the major principal stress axis will rotate from -90 degrees to 90 degrees during the train loading passage as well as the number and amplitude of stress waves reduce gradually with the increase of depth. It is also shown that both PSR and stress are quite sensitive to train loads as the upper soil element can identify a single wheel load while the lower soil element can just identify a bogie and even the whole train load. And through the cyclic torsional shear tests, it's obvious that the rotation of principal stress can promote the accumulation of pore pressure and strain in soft soil foundations significantly; and in the case when vertical cyclic stress amplitude equals to 15 kPa, the pore pressure and strain in cyclic torsional shear test are 77% and nearly 50% higher than that in cyclic triaxial test respectively. What's more, as the cyclic stress amplitude increases, the gap of cumulative pore pressure and strain between that two types of tests will enlarge further, which may even result in essential difference that samples in triaxial tests show only small strain whereas failure in torsional shear tests.

Analysis method for spatial movement of gravels in mixed soil during triaxial testing

The Behavior of Gravel-Soil Interface During Triaxial Testing of the Mixed Soil

3D Multiscale Modeling of Strain Localization in Granular Media

Computed Tomography Based Numerical Simulation for Triaxial Test of Soil–rock Mixture

CT SCANNING AND PFC MODELING COMBINED 3D METHOD FOR GRAVEL-BEARING SLIP SOIL

Development and Application of a Large-Scale Static and Dynamic True Triaxial Apparatus for Gravel

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

DEM numerical test method for granular matter under complex 3D loading

Research on mechanical response of soft clay under cyclic loading involving principal stress rotation

Experiment on Undrained Dynamic Strength and Deformation Characteristics of Saturated Gravelly Soil

Investigation of the parallel gradation method based on the response of track-bed materials under cyclic loadings

Modeling of gravelly soil with multiple lithologic components and its application

Microscopic Mechanism of Coarse-Grained Soil Under Triaxial Test Based on PFC-FLAC Coupling Method

Experimental and Constitutive Modeling Investigations of the Mechanical Behaviors of a Gravelly Soil Material Under Large-Size Triaxial Cyclic Tests

Study on the shear and deformation characteristics of geogrid-reinforced gravelly soils based on large-scale triaxial tests

A novel method for imitating true-triaxial stress path with conventional triaxial apparatus

Analyzing the deformation and failure of geosynthetic-encased granular soil in the triaxial stress condition

Triaxial Shear Tests on Soil-Rock Mixture and 3D Multi-Shear Bounding Surface Model

Numerical Simulation Study on Compression Characteristics of Gravelly Soil Mixture Based on Soft Servo Method

Experimental Study of Silty Clay Plane Strain Tri-axial Test under RTC Path and Modified Cam-clay Model