Abstract:Oil leakage results in serious environmental pollution and severe waste of resources, which makes the development of low-cost, environmentally friendly, high-capacity, and durable oil absorbents an urgent task. In this paper, superhydrophobic coatings of activated carbon (AC)–TiO2– were developed without using any fluorine-containing reagents. The TiO2 particles were grown on the AC surface to form AC–TiO2 powders. The hydrophilic AC–TiO2 powders were further grafted with polydimethylsiloxane (PDMS) molecules (AC–TiO2–PDMS) to achieve superhydrophobicity through covalent reaction between PDMS and TiO2 under UV light. The AC–TiO2–PDMS powder was mixed with a PDMS polymer to form a superhydrophobic coating solution, which made the commercial sponge obtain durable superhydrophobicity. It showed high liquid repellency and antifouling ability toward various liquids and drinks. Taking advantage of the large surface area and high absorption capacity of AC, the coated sponge showed superior high absorption capacity (up to 100–158 g/g) toward various oils and organic solvents with a high absorption speed. Besides, the sponge showed high reusability that could be repeatedly used to absorb various oils and organic solvents. Moreover, the sponge also presented photocatalytic capability, which could repeatedly photodegrade the oil contaminants without influencing the superhydrophobicity, therefore largely increasing the recyclability and lifetime of the sponge. It also could separate immiscible oil–water mixtures with high efficiency and continuously remove oils from water. It was chemically stable and mechanically durable and could resist various harsh conditions without losing its superhydrophobicity. This study developed a facile, cost-effective, and environmentally friendly method to fabricate very promising absorbents for large-scale oil and solvent cleanups and recovery.This article has not yet been cited by other publications.

Emulsion-Templated, Polymerization-Free, Ultralight Sponges For Oil Spills Reclamation

Smart Sponge for Fast Liquid Absorption and Thermal Responsive Self‐Squeezing

Facile Fabrication of Hydrophobic Porous Monoliths from Charge-Driven Assembled Polymers-Stabilized High Internal Phase Emulsion for Oil Spills Reclamation

Three-dimensional structured sponge with high oil wettability for the clean-up of oil contaminations and separation of oil–water mixtures

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

PDA-PEI Copolymerized Highly Hydrophobic Sponge for Oil-in-water Emulsion Separation Via Oil Adsorption and Water Filtration

A Durable Superhydrophobic Porous Polymer Coated Sponge for Efficient Separation of Immiscible Oil/water Mixtures and Oil-in-water Emulsions.

Facile Fabrication of Marine Algae-Based Robust Superhydrophobic Sponges for Efficient Oil Removal from Water

Mussel-Inspired and In Situ Polymerization-Modified Commercial Sponge for Efficient Crude Oil and Organic Solvent Adsorption

A Modified Porous Sponge with Selective Ability for Oil Removal from Oil-Water Mixtures

Simple preparation superhydrophobic melamine sponge via one-step emulsion polymerization for continuous oil/water separation in harsh environment

Hierarchically porous superhydrophobic sponge for oil-water separation

Facile removal and collection of oils from water surfaces through superhydrophobic and superoleophilic sponges

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

Facile Fabrication of a Robust Superhydrophobic/superoleophilic Sponge for Selective Oil Absorption from Oily Water

Construction and Regulation of a Superhydrophobic Sponge via In Situ Anchoring of a Hyper-Cross-Linked Polymer for Efficient Oil/Water Separation

Pumping with Modified Polyurethane Sponge: An Alternative Technology for Removing Oil Spills from Water Surface

Interfacial assembly of a durable superhydrophobic polyurethane sponge with "scalelike" structures for efficient oily emulsion separation

Green Fabrication of a Multifunctional Sponge as an Absorbent for Highly Efficient and Ultrafast Oil–Water Separation

Enhanced Oil/water Separation Using Superhydrophobic Nano SiO2-modified Porous Melamine Sponges.

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal