Abstract:This paper studies the acoustic behavior inside the deep annular and cylindrical cavity at low Mach number. The turbulent shear layer above the cavity acts as a broadband noise source and drives resonant standing waves inside the cavity for various modes. According to previous investigation, those resonant standing waves inside the cavity play an important role in the aeroacoustic resonance of cavity noise, which gives perfect prediction of tonal frequency from the solution of wave equation. From the perspective of engineering application, it is more important to predict the spatial distribution of tonal intensity. It is needed to point out that the solution of the linear wave equation also provides the relative spatial distribution tonal intensity and the absolute value of tonal intensity can be determined from the acoustic experiments that is measured only at some locations. Based on this idea, a scheme is setup and validated to predict the amplitude spatial distribution of tonal intensity of aeroacoustic resonance. For example, an analytical model is established to provide the relative mode shape of aeroacoustic resonance in a simple geometry of cavity, which is realized by solving the wave equation with boundary conditions in a semi-closed space. This model considers the freestream velocity scaling and the depth correction factor varying with the Helmholtz number. The experimental aeroacoustic result is acquired by measuring the pressure fluctuation at some locations of cavity internal wall with the use of surface microphones. The experimental results are used to supplement and validate this analytical model. The amplitude spatial distribution at any freestream velocity (low Mach number) can be acquired by measuring the pressure fluctuation once at the leading edge or trailing edge of cavity bottom at an arbitrary Mach number, as the amplitude of most modes reaches its maximum here.

Modeling and Analysis of Helmholtz Cavity Basing on One-dimensional Plane Wave Propagation

Parameter Analysis of On-Orbit Volumetric Measurement Using Cavity Resonance

Parametric Experiments of Volumetric Measurement Based on Linear Cavity Resonance

Research of Coupling Coefficient Extraction of a Cavity Resonator

Finite Element Analysis of Nonlinear Wave Resonance by Multiple Cylinders in Vertical Motions

Experimental study on cylindrical resonant cavity used in surface wave plasma source

Numerical Analysis on Effect of Head Cavity on Resonance Damping Characteristics in Solid Rocket Motors

The Effects of Droplets and Bubbles on On-orbit Propellant Volumetric Measurements Using Cavity Resonances

Research of Cavity Wake Models Around the Partially Cavitating Underwater Vehicle

An Analytical Model for Calculating Vibrations from Twin Tunnels in a Saturated Poroelastic Half-Space

Effect of elastic cavity walls on acoustic characteristics of a water-filled Helmholtz resonator: equivalent lumped parameter model for cylindrical cavity

A study on the resonance frequency of water-filled Helmholtz resonator with elastic cavity walls

Investigation on Spatial Distribution of Acoustic Resonance in Annular Cavity: Frequency and Intensity

Influence of cavity wall elasticity on resonant frequency of small underwater cylindrical Helmholtz resonator

A dynamic modeling method for resonator of hemispherical resonator gyro

Modeling liquid hydrogen cavitating flow with the full cavitation model

MODELING METHODS OF ACOUSTIC CAVITY IN COMBUSTION CHAMBER OF LIQUID ROCKET ENGINE

Dynamic modelling and quality factor evaluation of hemispherical shell resonators

Numerical Investigation on the Harbour Resonance Inside A Harbour with Lateral Cavities

A distributed parameter model of the Janus–Helmholtz transducer

Equivalent Resonant Cavity Model of Arbitrary Periodic Guided-Wave Structures and Its Application to Finite-Difference Frequency-Domain Algorithm