Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

More Efficient and Environmentally Friendly Combustion of Low-Rank Coal in a Down-Fired Boiler by a Simple but Effective Optimization of Staged-Air Windbox

Optimizing the Combustion of Low-Quality Coal by the Wall Wind Auxiliary Combustion Method in a Tangentially Fired Utility Boiler

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Industrial measurement of combustion and NOx formation characteristics on a low-grade coal-fired 600MWe FW down-fired boiler retrofitted with novel low-load stable combustion technology

Regulating Low-Nox and High-Burnout Deep-Air-staging Combustion under Real-Furnace Conditions in a 600 MWe Down-Fired Supercritical Boiler by Strengthening the Staged-Air Effect.

Investigations on combustion optimization and NOX reduction of a 600-MWe down-fired boiler: Influence of rearrangement of tertiary air and jet angle of secondary air and separated over-fire air

ICOPE-15-C078 Effects of Vent Air Angles on Combustion and NO Emission Characteristics for a Down-Fired 600MW Pulverized-Coal Utility Boiler Retrofitted with a Novel Combustion System

Reducing NOx Emissions for a 600 MWe Down-Fired Pulverized-Coal Utility Boiler by Applying a Novel Combustion System

Optimization of Staged Combustion in a 600 MWe Tangentially Fired Boiler with Wall Air Injection

Optimization of the Combustion Organization in a 1000 MW E Opposed Wall-Fired Utility Boiler by Wall Air Injection

Low NOx combustion and SCR flow field optimization in a low volatile coal fired boiler

Combustion System Renovation of 125MW Unit for Enhancing Coal Suitability and the Influence on NOx Emission

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

A new on-line combustion optimization approach for ultra-supercritical coal-fired boiler to improve boiler efficiency, reduce NOx emission and enhance operating safety

Combustion and NOx Emission Characteristics with Respect to Staged-Air Damper Opening in a 600 MWe Down-Fired Pulverized-Coal Furnace under Deep-Air-staging Conditions.

Optimizing Biomass Combustion in a 130 T/h Grate Boiler: Assessing Gas-Phase Reaction Models and Primary Air Distribution Strategies

Numerical investigation of stable combustion at ultra-low load for a 350 MW wall tangentially fired pulverized-coal boiler: Effect of burner adjustments and methane co-firing

CFD modeling of hydrodynamics, combustion and NOx emission in a tangentially fired pulverized-coal boiler at low load operating conditions

A novel coal combustion technology for a down-fired boiler: Aerodynamic characteristics

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Aerodynamic Characteristics of a Stoker Furnace with Staged Combustion: Comparison of Cold Modeling Experiments and Numerical Simulations