A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue
Steven J Lorenz,Farshid Sadeghi,Hitesh K Trivedi,Lewis Rosado,Mathew S Kirsch,Chinpei Wang
DOI: https://doi.org/10.1016/j.ijfatigue.2020.105986
IF: 5.489
2021-02-01
International Journal of Fatigue
Abstract:In this study, a continuum damage mechanics (CDM) finite element (FE) model was developed to investigate the effects of surface roughness on rolling contact fatigue (RCF) life of non-conformal contacts. In order to assess the surface roughness of tribo-components, twelve deep groove rolling element bearings from various companies in different sizes were procured and measured using an optical surface profilometer. The roughness average (Ra) and the root mean square of surface roughness (RMS, σ) ranged from a low of 0.03, 0.05 µm to a high of 0.14, 0.20 µm, respectively. The number of peaks and valleys per 400 µm were measured and calculated. The number of peaks ranged from 11 to 31 (>99.5% Confidence Interval). The measured surfaces also revealed that a sinusoidal pattern can be used to accurately represent the surface patterns. The sinusoidal surface pattern was used to determine the elastohydrodynamic lubrication (EHL) pressure distribution between an equivalent rough surface in contact with a smooth surface. Four roughness amplitude were used to generate specific film thicknesses (λ-ratios) resulting in full to mixed EHL lubrication regimes. The EHL pressure distributions were replaced with representative symmetric Hertzian pressure distributions in order to remove the effect of asymmetry of an EHL pressure distribution. The resulting symmetric pressure distributions were used in a finite element continuum damage mechanics model to determine RCF life of machine elements operating in specific film thickness range of 1 < λ < 10. The RCF results from the FE model indicate that as roughness amplitude increases or lambda ratio decreases, the fatigue lives decrease for the various frequencies. Additionally, subsurface failure fatigue lives are reduced as roughness frequency increases regardless of amplitude or Hertzian pressure. The RCF results also indicate that for the low frequency pressure distribution the contact is most susceptible to surface failure, whereas for high frequency pressure distribution the contact resists surface failure. The results from this investigation were used to develop surface roughness effects for various RCF life equations commonly used in rolling element bearing application.
materials science, multidisciplinary,engineering, mechanical