Abstract:Deployable mesh antennas have dominated high-resolution earth observations and telecommunications, benefitting from their high package ratios and low areal densities. They are usually folded compactly for launch and unfolded to the working configuration once in orbit. This unfolding process is carried out by driving units, composed of pretensioned springs and/or motors, which transfer the energy stored in passive springs and/or outputted by active motors into the potential energy of the antenna. A previous energetic analysis has revealed that the potential energy remains low during the initial deployment stage and grows sharply in the late stage when the structure members are stressed almost to the fully deployed configuration. Therefore, the force required to deploy a mesh antenna increases over the process of unfolding, exhibiting negative stiffness. However, the output force of a normal linear spring has positive stiffness. To tackle this conflict, we proposed, designed, and developed a new type of passive actuator with nonlinear force-displacement curves to meet the specific demand of unfolding mesh antennas. This was achieved through the combined use of a torsional spring and a convex cam. For the desired force displacement curve, the cam profile was theoretically formulated as an optimization problem, the solution of which was numerically obtained by the sequential quadratic programming algorithm. The experimental result showed that the designed cam could generate the target force. We also compared the unfolding processes of a mesh antenna via simulations, driven by three kinds of springs with nearly the same stored energy; one has positive stiffness, one has zero stiffness and the other one has negative stiffness. Results confirmed that the negative-stiffness spring is more suitable for unfolding the mesh antenna. Moreover, the passive nonlinear actuators developed here might also be used in other applications where nonlinear force is needed.

Harnessing Noncircular Gears to Achieve Nonlinear Passive Springs

Realizing Nonlinear Springs Through Noncircular Planetary Gears

Structural Optimization of a Novel Coaxial Magnetic Gear

Passive Nonlinear Actuators for Deploying Mesh Antennas

A Kind of Spatial Angular Magnetic Gear Transmission

Simulation Analysis of a Novel Magnetic Gear

Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming

Automated resolution of the spiral torsion spring inverse design problem

Translation torsion coupling dynamic modeling and nonlinearities investigation of non-circular planetary gear systems

Novel Adaptive Magnetic Springs for Reliable Industrial Variable Stiffness Actuation

Enhancing the mobility of small-scale robots via nonlinear structural springs exhibiting negative stiffness

Computational Design and Optimization of Non‐Circular Gears

A device capable of customizing nonlinear forces for vibration energy harvesting, vibration isolation, and nonlinear energy sink

A Novel Rotational Actuator With Variable Stiffness Using S-Shaped Springs

Advanced design strategies and applications for enhanced higher-order multisegment denatured Pascal curve gears

Novel Spring Mechanism Enables Iterative Energy Accumulation under Force and Deformation Constraints

Programmable gear-based mechanical metamaterials

An Equivalent Axisymmetric Modeling Approach for Circumferential Springs under Large Deformation Based on Mechanical Anisotropy

Origami-Inspired Composite Springs with Bi-directional Translational-Rotational Functionalities

Nonlinear Dynamic Analysis of Two External Excitations for the Gear System Using an Original Computational Algorithm