Electrochemical Investigation of Chloride Ion-Induced Breakdown of Passive Film on P110 Casing Steel Surface in Simulated Pore Solution: Behavior and Critical Value Determination
Ye Peng,Yuanhua Lin,Ruochen Xia,Zhixiang Dai,Wenyan Zhang,Wanying Liu
DOI: https://doi.org/10.3390/met14010093
IF: 2.695
2024-01-13
Metals
Abstract:In the petroleum industry, the casing steel is fixed with a cement sheath to ensure reliable service in demanding conditions characterized by high temperature, high pressure, and exposure to multiple types of media. After the hydration of the cement, a porous material is produced with a highly alkaline solution filling the pores, commonly referred to as the pore solution. The casing will form a protective passive film when in contact with a highly alkaline pore solution. Nevertheless, once the cement sheath cracks, chloride ions in the stratum will pass through the cement sheath to the surface of the casing. When chloride ions accumulate to a certain concentration, the passive film will be destroyed, without exerting a protective influence on the substrate. After chloride ions come into direct contact with the casing, the casing is prone to severe failure due to corrosion perforation. The casing failure can cause a blowout outside the casing and even scrapping of the oil well. Controlling casing corrosion and ensuring casing integrity relies on understanding the critical chloride ion concentration that can cause the degradation of the passive film. Therefore, to assess the electrochemical properties and analyze the damage process of the passive film under varying chloride ion concentrations, several characterization techniques were employed. These included potential–time curves (E-t), polarization curves, electrochemical impedance spectroscopy (EIS), and Mott–Schottky curves. In addition, the composition of the passive film on the surface of the P110 casing steel was qualitatively analyzed using X-ray photoelectron spectroscopy (XPS). To further understand the surface morphology of the P110 casing steel, scanning electron microscopy (SEM) was used.
materials science, multidisciplinary,metallurgy & metallurgical engineering