Abstract:The given paper intends to present the results of our experimental study of an improved emergency treatment of the water resources contaminated by thallium.In our study,we have evaluated the thallium-removal efficiency through laboratory tests,which is by nature a simulated treatment for the time being.The results of our experiments show that the currently adopted treating process,though is able to remove part of contaminants(e.g.it can make thallium mass concentration reduced from 0.15 μg/L to 0.142 μg/L),the remaining thallium concentration would not be able to meet the drinking water standard demands.And,therefore,it would be necessary to enhance the coagulation with potassium permanganate(KMnO4) preoxidation and the activated carbon adsorption process for heightening the thallium efficiency.Single factor analysis tests also prove that the removal capacity of thallium can be improved by increasing the dosage of KMnO4 and pH value,when the dosage of KMnO4 exceeded 1 mg/L with pH value higher than 9,it would be possible to keep the same removal efficiency.The orthogonal test indicates that KMnO4 may have a significant impact on the removal efficiency of thallium.Actually we can have two processes from the orthogonal test: one is the optimal process,which can be achieved by dosing KMnO4 of 1.00 mg/L,with pH value of 9,with activated carbon of 30 mg/L,and PAFC of 1.88 mg/L;the other is the economical process,which can be done by adding KMnO4 of 1.00 mg/L,with pH value of 8.5,and PAFC of 1.4 mg/L.Compared with the initial mass concentration of thallium 0.336 μg/L,the thallium mass concentration can be reduced to 0.045 μg/L under the condition of optimal process,and 0.081 μg/L under the economical condition.However,though the removal rate proves the optimal process,the outflow water quality under the economical condition tends just to be better in terms of pH value,turbidity and CODMn.Nevertheless,the optimal process could treat the raw water with the mass concentration of thallium lower than 1.24 μg/L,while the economical process could treat water whose concentration of thallium is lower than 0.64 μg/L.

Treatment of Trace Thallium in Contaminated Source Waters by Ferrate Pre-Oxidation and Poly Aluminium Chloride Coagulation

Highly Efficient Removal of Trace Thallium from Contaminated Source Waters with Ferrate: Role of in Situ Formed Ferric Nanoparticle.

Enhanced Trace Tl Removal with Ferrate Through the Addition of Mn(II): Effect and Mechanism

Removal of Trace Thallium from Industrial Wastewater by Fe<sup>0</sup>-Electrocoagulation

Significantly Improving Trace Thallium Removal from Surface Waters During Coagulation Enhanced by Nanosized Manganese Dioxide.

Effective Removal of Trace Thallium from Surface Water by Nanosized Manganese Dioxide Enhanced Quartz Sand Filtration.

Adsorptive behavior of thallium using Fe3O4-kaolin composite synthesized by a room temperature ferrite process

Effective Removal of Thallium, Recovery, and Kinetic Research by MnO2@HKUST-1 for Wastewater

Perspective on Fe0-PS synergetic effect and reaction mechanism in the thallium(I) contaminated water treatment

Selective removal of thallium from water by MnO2-doped magnetic beads: Performance and mechanism study

Combined Fenton process and sulfide precipitation for removal of heavy metals from industrial wastewater: Bench and pilot scale studies focusing on in-depth thallium removal

Effective removal of thallium, recovery, and kinetic research by MnO 2 @HKUST-1 for wastewater

Experimental study on the emergency treatment of drinking water source accidents caused by thallium pollution

Enhanced oxidative and adsorptive removal of thallium(I) using Fe3O4@TiO2 decorated RGO nanosheets as persulfate activator and adsorbent

Treatment on Containing Thallium Wastewater by ECS Activation and Adsorption Purification of Microporous Materials

Removal of Trace Tl from Drinking Water by Enhanced Filtration Using Nanosized MnO2

Fabrication and characterization of magnetically responsive Fe3O4@TiO2 core-shell adsorbent for enhanced thallium removal

An approach for thallium and antimony combined pollution removal in drinking water using potassium permanganate composites and polymeric ferric sulfate

Efficient Removal Of Thallium From Flue Gas Using Manganese-Based Mof Catalysts By Gas-Solid Phase Catalytic Oxidation And Adsorption

Mechanism of iron salt impregnated biowaste biochar with a prevailing free radical initiator for effective removal of toxic thallium from solution

Removal of Thallium by MnOx Coated Limestone Sand Filter Through Regeneration of KMnO4: Combination of Physiochemical and Biochemical Actions.