Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Distributed Control Strategy and Alternate Modulation Balance Algorithm of High- frequency-link Modular Multilevel DC Transformer Based on Phase-shifting Principle

Optimized Control Strategy of Modular Multilevel DC Transformer for High-frequency-link Voltages Matching in the Whole Operation Range

A high-frequency-link voltage matching phase-shift control strategy for high-frequency modular multilevel DC transformer in MVDC distribution networks

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

A Capacitor Voltage Balancing Method for a Modular Multilevel DC Transformer for DC Distribution System

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Hybrid Multilevel Converters Based on Thyristor Alternate-arms

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

High-Frequency-Link Modulation Methodology of DC–DC Transformer Based on Modular Multilevel Converter for HVDC Application: Comprehensive Analysis and Experimental Verification

A Hybrid Modular Multilevel Converter Topology with an Improved Nearest Level Modulation Method

Analysis and optimisation of modulation strategy based on dual-phase-shift for modular multilevel high-frequency-link DC transformer in medium-voltage DC distribution network

Analysis and Design of a Novel Hybrid Modular Multilevel Converter with Time-Sharing Alternative Arm Converter

High Power Modular Multilevel DC-DC Converter Based on Dual-Loop CPS Modulation

Power Flow Control of Bidirectional Modular Multilevel Resonant Converters in MVDC and LVDC Distribution Networks

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

Modeling, Analysis, and Enhanced Control of Modular Multilevel Converters with Asymmetric Arm Impedance for HVDC Applications

Modular Hybrid-Full-Bridge DC Transformer with Full-Process Matching Switching Strategy for MVdc Power Distribution Application

Operation, Analysis and Experiments of DC Transformers Based on Modular Multilevel Converters for HVDC Applications

Arm Phase-Shift Modulation And Pre-Charge Strategy For An Enhanced Alternate Arm Converter