Abstract:This paper considers constraints on the cycle number of energy storage systems (ESSs), travel distances of switchable capacitors reactors (SCRs), on load tap changers (OLTCs) and step voltage regulators (SVRs). The characteristics and operational constraints of these equipments are properly formulated with binaries and big-M method, obtaining desirable linear descriptions. The branch flow equations of distribution systems for active and reactive power coordination are constructed. Considering physical constraints, a multi-period mixed-integer deterministic second-order conic programming (SOCP) to minimize network losses is formulated. Then, considering uncertainties of loads and active power of renewable distributed generators (DGs), a two-stage robust model is developed. A directly iteratively solving method between the first and second stage models is proposed. In contrast to the traditional column-and-constraint generation (CCG) method, increases to variables and constraints are not needed to solve the first stage model. To solve the second stage multi-period model, only the model of each single period needs to be solved first. Then their objective function values are accumulated, and the worst scenarios of each period are concatenated. As a result, the solving complexity is greatly reduced. The capabilities of the proposed method are validated by three simulation cases. It is found that the computational rate using the proposed method is significantly enhanced with much less computer storage. Specifically, the simulation results of 4, 33 and 69-bus systems indicate that the computing rate of the proposed method is about 28 times higher than CCG method when 8 iterations are performed. Meanwhile, the precision of optimization results is also improved.

A Multi-Stage Solution Approach for Dynamic Reactive Power Optimization

Dynamic Reactive Power Optimization Method Based on Mixed Integer Second-order Cone Programming

MDP-Based Distribution Network Reconfiguration with Renewable Distributed Generation: Approximate Dynamic Programming Approach

A New Filter Collaborative State Transition Algorithm for Two-Objective Dynamic Reactive Power Optimization

Distributed Real-Time Multi-Objective Control of a Virtual Power Plant in DC Distribution Systems

Dynamic optimal reactive power dispatch based on parallel particle swarm optimization algorithm

Optimal Reactive Power Dispatch Based on a Parallel Cooperative Particle Swarm Optimization Algorithm and PC-cluster

Reactive Power Optimizatin of Distribution Network Based on Primal-Dual Interior Point Method and Simplified Branch and Bound Method

A Fast Dynamic Optimization Approach for Transient Stability Emergency Control

Optimized Two-Time Scale Robust Dispatching Method for the Multi-Terminal Soft Open Point in Unbalanced Active Distribution Networks

DDPG-based Reactive Power Optimization Strategy for Active Distribution Network

A Three-Stage Optimization Method for Dynamic Optimal Power Flow

Dynamic Reactive Power Optimization Algorithm for Distribution System

Fast Solving Method for Two-Stage Multi-Period Robust Optimization of Active and Reactive Power Coordination in Active Distribution Networks

Optimal Reactive Power Dispatch with Accurately Modeled Discrete Control Devices: A Successive Linear Approximation Approach

Multi-Stage Robust Optimization of Real-Time Dynamic Dispatch with Fast-Acting Units in Resilient Power Systems

Optimal Demand Response Incorporating Distribution LMP With PV Generation Uncertainty

REACTIVE POWER OPTIMIZATION FOR HIGH-MEDIUM VOLTAGE DISTRIBUTION SYSTEMS

A Fully Distributed Reactive Power Optimization and Control Method for Active Distribution Networks

Multistage Mixed-Integer Robust Optimization for Power Grid Scheduling: An Efficient Reformulation Algorithm

A Decomposition and coordination algorithm for reactive power optimization in large-scale power systems