Abstract:Accurate temperature prediction of the operating tunnel cable is crucial for its safe and efficient function. To achieve a rapid and accurate prediction of the steady-state temperature of the tunnel cable, the self-modeling pattern in natural convection on the cable surface in the rectangular tunnel is investigated, and the self-modeling method for the convective heat transfer coefficient calculation is proposed. A thermal circuit model for single cables is further established to predict the cable core temperature, and the model is extended to predict the cluster-laid cable core temperature based on the combined method. The results show that when the tunnel size is neglected, the maximum relative deviation of the convective heat transfer coefficient between the self-modeling method and the finite element simulation is only 1.78% in the studied cases, indicating that the natural convection on the cable surface approximately satisfies the self-modeling method. Additionally, applying the self-modeling method to the thermal circuit can accurately predict the temperature of the single cable core. Furthermore, for the three-phase four-circuit cable, the maximum deviation between the temperature prediction results and the finite element results is within 2 K in the studied cases, which verifies the predictive accuracy of the combined method for the cluster-laid tunnel cable.

Research on the Fast Calculation Model for Transient Temperature Rise of Soil Directly Buried Cable Group

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

A Simplified Method for Evaluating Temperature Effect on the Behavior of Layered Soil with a Time-Varying Cylindrical Heat Source

Inversion of Soil Thermal Conductivity and Ampacity of the Buried High Voltage Power Cables

Investigation on Circulation Current Calculation and Grounding Methods of Multi-circuit Cables

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

Calculation of Ampacity of Double-loop XLPE Cables in Trenches Based on Multiphysics Simulation

Steady-State Temperature Prediction for Cluster-Laid Tunnel Cables Based on Self-Modeling in Natural Convection

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

Temperature Field Calculation and Thermal Circuit Equivalent Analysis of 110 kV Core Cable Joint

Simulation and Calculation of Temperature Field and Current-Carrying Capacity of Power Cables under Different Laying Methods

Analysis of the eddy current loss and economy study in underground cable duct

Analysis of the Three-Dimensional Temperature Distribution and Ampacity of Forced Ventilation Multi-loop Cable Tunnel by Finite Element Method

Analysis on three-core power cable temperature field and ampacity model under typical laying environment

Cable heat dissipation considering air flow field,its influencing factors and economical efficiency

Temperature field simulation of medium and low voltage composite cable

Dynamic thermal analysis for underground cables under continuously fluctuant load considering time-varying van wormer coefficient

Calculation and Analysis of 220kV Cross-River Cable Carrying Capacity Considering Complex Environments, Part I — Analysis of Thermal Problems for the Entry Section of Overhead Transmission Line to Underground Cable

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Lumped 3-D Equivalent Thermal Circuit Model for Transient Thermal Analysis of TSV Array

LINE SOURCE METHOD FOR MEASURING THERMAL PROERTIES OF DEEP GROUND