Abstract:The high-voltage dis-connector, as a key substation equipment in the power grid structure, is vitally important to the quality of the power grid operation. Due to the geographic location of Guangdong Province of China, many strong typhoons have caused great damage to power facilities in recent years. And the loss of the dis-connector is the most serious, which severely affects the reliability of the power supply. However, the research on the wind resistance of the dis-connector is still few, so the improvement work of the device is quite difficult. The phenomenon of strong typhoon destroying the dis-connector mainly includes the fracture of post insulator and the conductive arm. In the study of the mechanical properties of post insulator and the conductive arm, almost all wind loads are treated as a concentrated force, but the surfaces of the post insulator and the conductive arm are actually subjected to a continuous wind pressure distribution. The magnitude of the wind load and the error of its application method will inevitably lead to inaccurate stress and strain data obtained in the calculation of the strength of the post insulator and the conductive arm, so that the post insulator and the conductive arm cannot be accurately designed. In this paper, the wind resistance of the dis-connector are studied by using the fluid-structural coupling analysis method. Firstly, the hydrodynamic RNG k-ε turbulence model is used to simulate the wind field around the dis-connector, so as to obtain the accurate result of the wind pressure distribution on the surface of the dis-connector. Then the surface pressure of the dis-connector calculated by hydrodynamics simulation is introduced into the structural module of Ansys software as the applied load. The finite element method is used to simulate and calculate the stress and strain of the dis-connector, so as to obtain the mechanical characteristics of the dis-connector under strong wind. In addition, this paper analyzes the effects of different wind speeds and different wind directions on the wind load applied to the surface of dis-connector, and provide a basis for wind resistance design of dis-connector.

Contact-finger-pressure Detection Technology and Application of the High Voltage Disconnector During the Open and Close Processes

On the Relationship Between Internal Pressure and Permittivity in the Interrupter of VCB

Simulation Study on Wind Load and Mechanical Characteristics of High Voltage Dis-Connector

Experimental Research on Mechanica Properties of Ultrahigh Voltage Disconnector in Cold Condition

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Influence of Mechanical Faults on Electrical Resistance in High Voltage Circuit Breaker

Influence of Temperature and Air Pressure on Arc Characteristics of Horizontal Air Insulated Disconnector

Measurement and Simulation Analysis of the Contact Impact Force of 126 kV Vacuum Circuit Breaker

Research on Non-Contact Voltage Measurement for Insulated Transmission Line

Analysis of electrical contact characteristics of strap contacts used in high voltage bushings under eccentric conditions

Simulation of AC and DC Electric Field for 800 kV Grade High Voltage Disconnector

A gas spark switch electrode impact pressure test platform

On-line Monitoring Method for Mechanical Characteristics of Vacuum Circuit Breakers

Arc Behaviors of Three Kinds of Bridge-type Contacts when Opening a Resistive Load in Range of from 300VDC to 750VDC

Study of DRM During Closing Period of High Voltage Circuit Breaker

Experimental Investigation on Impact Phenomena in a Permanent Magnetic Actuator of a 126kv Vacuum Circuit Breaker

SF6 High-Voltage Circuit Breaker Contact Status Detection at Different Currents

Analysis and Study on Displacement Transducer for Testing in Mechanical Test of Intelligent High-voltage Switch

A Novel Fast Contact Operating Mechanism of the Medium and Low Voltage Hybrid DC Current Limiting Circuit Breaker

Numerical Analysis on Magnetic Field Characteristic of Axial Magnetic Field Contacts under Long Break Distance

Study on a New Single Coil-Type Axial Magnetic Field Contact for High-Voltage Vacuum Interrupters