Abstract:Polymer dielectrics are the key component in film capacitors, which are one of the most fundamental elements in modern electronics and power systems [1–3]. Film capacitors are capable of storing energy when voltage is applied, in the form of electric charges separated by a dielectric material sandwiched by a pair of metal electrodes. Film capacitors possess the advantages of high breakdown strength, low power loss and processing flexibility compared with their counterparts in competition such as electrolytic capacitors and ceramic capacitors [4], meaning they can sustain high voltage, have great efficiency in electrical energy storage and can be manufactured in low-cost and efficient methods. Moreover, the unique self-clearing (sometimes referred to as self-healing) characteristic of polymer dielectrics ensures reliable operation of film capacitors [5], which is of paramount significance since capacitors storing a large amount of electrical energy can explode when catastrophic failure occurs. To be specific, the self-clearing is a process that when localized breakdown occurs at a spot of metallized film capacitors (i.e., a film capacitor using dielectric polymer films with metallic electrodes deposited on the surface [5], [6]), the energy released in the breakdown process can "clear" the breakdown-site, forming an open circuit. This process protects the capacitor from catastrophic failure (Figure 1) [7]. Serving as a device for charge storage and control, film capacitors are commonly used in many types of circuits such as snubbers, phase shifters, filters and AC/DC converters/inverters. In particular, film capacitors are capable of releasing the stored energy in an extremely short period of time to supply a high power density [8–10], which is desirable for the pulsed power application [1]. However, sizeable energy storage has not yet been achievable with film capacitors due to the limited v-lumetric energy density (usually measured in Joule per cubic centimeter at the material level). This shortcoming has caused a major issue in the electrical apparatus and electrified systems where capacitors constitute a large volume and weight fraction, i.e., a bulky, and sometimes even cumbersome size. For instance, in the 800 kV voltage source converter-based high voltage direct current transmission system, each converter tower has a volume of approximately 480 m<sup>3</sup>, where capacitors are ∼60% of the converter weight, and ∼50% of the volume.

Polymer-based Nanocomposite Dielectrics with High Energy Storage Capacity

Polymer nanocomposite dielectrics for capacitive energy storage

Research Progress of Ferroelectric Polymer-based Composites with High Energy Density

Polymer Dielectrics and Their Nanocomposites for Capacitive Energy Storage Applications

High-Energy-Density Ferroelectric Polymer Nanocomposites for Capacitive Energy Storage: Enhanced Breakdown Strength and Improved Discharge Efficiency

Preparation strategy and composition design of polymer-based layered composites for improving energy storage performances

Ferroelectric Polymers and Their Nanocomposites for Dielectric Energy Storage Applications

Photochemical deposition of ZnS buffer layers for Cu(In, Ga)Se2 thin film solar cells via reusable solutions

Recent Advances on Multilayer Polymer Composites of High Energy Density and Low Dielectric Loss

Polymer-based materials for achieving high energy density film capacitors

High-energy-density polymer dielectrics via compositional and structural tailoring for electrical energy storage

Polymer Matrix Nanocomposites with 1D Ceramic Nanofillers for Energy Storage Capacitor Applications

Polymer nanocomposites for high-energy-density capacitor dielectrics: Fundamentals and recent progress

Synergy of Micro-/Mesoscopic Interfaces in Multilayered Polymer Nanocomposites Induces Ultrahigh Energy Density for Capacitive Energy Storage

Research Progress and Prospect of Polymer Dielectrics

Challenges and Opportunities of Polymer Nanodielectrics for Capacitive Energy Storage

Polymer‐/Ceramic‐based Dielectric Composites for Energy Storage and Conversion

Advanced Polymer-Based Insulating Materials with High Energy Storage Density

Polymer dielectrics for capacitive energy storage: From theories, materials to industrial capacitors

Energy Storage Performance of Polymer-Based Dielectric Composites with Two-Dimensional Fillers

All-Organic Polymer Dielectric Materials for Advanced Dielectric Capacitors: Theory, Property, Modified Design and Future Prospects