Abstract:Filters have a wide range of applications in many fields. Engineers generally use signal sources to manually test the characteristics of filters under test. In this research, we propose a system that automatically recognizes the characteristics and parameters of the analog filter throughout the entire process. This paper presents the theoretical conclusion that the instantaneous slope contribution at the n -order poles or zeros point in the Bode plot is dB/dec (where '+' represents zeros, and '−' represents poles). At the same time, we propose a voltage-controlled adaptive frequency sweep method. The designed automatic test system is based on DDS (Direct Digital Synthesizer), DSP (Digital Signal Processing), FPGA (Field-Programmable Gate Array) and ADC (Analog-to-digital converter) to build the hardware platform. According to the sinusoidal excitation method, the original data of the voltage response is obtained by voltage-controlled adaptive frequency sweep and frequency re-sweep of the filter under test with DSP. The information of these special values approximately 10 m dB/dec ( m is an integer) in the original data is captured by our conclusion of the zero-pole transient slope. The cut-off frequency and bandwidth of filters to be tested are more accurately measured by the local linear method. Combined with the knowledge of fuzzy recognition rule and normalization, an automatic recognition algorithm is designed in DSP according to data classification rules, screening rules and normalization rules. Finally, the system automatically recognizes the types, orders and approximate position of filters' poles and zeros of and the type of filters to be tested.

A Frequency Domain Subspace Identification Method Based on Phase Response Data

A new closed-loop identification technique for step-response model based on subspace approach

Iterative Algorithm for Identifying Multi-Modes Using Real Orthogonal Polynomials

On-line Frequency Response Method of Synchronous Machine Parameter Identification Based on Rotor Angle Measurement

Closed-Loop Subspace Identification Based on Kpls

Subspace based direct closed-loop identification via output over-sampling scheme

Multivariable Process Identification Based on Frequency Domain Measures

Recursive Closed-Loop Subspace Identification Based on Predictor Markov Parameters

A Dual-Frequency Approach Based on the Subspace Method for Identifying Nonlinear Vibration Structures

Time-varying System Identification Using Recursive Subspace Method Based on Free Response Data

A Two-Stage Time Domain Subspace Method for Identification of Nonlinear Vibrating Structures

Frequency Domain Subspace Identification of Fractional Order Systems Using Time Domain Data with Outliers

Time Domain Subspace Method for Fractional Order System Identification

Application of Poles Identification in the Digital Spectroscopy and the System Simulation

Application of Transient Slope of Zero and Pole in Bode Diagram in Automatic Identification of Filter Parameters

Integrating automatic order determination with response prediction error minimization for nonlinear subspace identification in structural dynamics

Phase response reconstruction for non-minimum phase systems using frequency-domain magnitude values

A Frequency Domain Step Response Identification Method for Continuous-Time Processes with Time Delay

Simulation and experiment of a blind subspace identification method

Frequency Domain Subspace Based Time-Delay System dentification Algorithm

Identification of time-varying modal parameters from operational responses