Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

A Strategy of Steady-state Target Calculation to Guarantee Feasibility of Dynamic Control in Double-layered Model Predictive Control

Multi-priority Rank Steady-State Target Calculation in Double-Layered Model Predictive Control by Optimizing Increments of Manipulated Variables

Multi-objective and Layered Steady-State Optimization Method of Model Predictive Control

Closed-loop robust steady-state target calculation for model predictive control.

A Low-Cost Pole-Placement MPC Algorithm for Controlling Complex Dynamic Systems

The Algorithm and Software Implementation for Double-layered Model Predictive Control Based on Multi-priority Rank Steady-state Optimization

Triple-Mode Model Predictive Control Using Future Target Information

An Overall Solution to Double-layered Model Predictive Control Based on Dynamic Matrix Control

A Soft Constraint Adjustment Method Based on Multi-Parametric Programming in Steady-State Target Calculation for Model Predictive Control

Two-layer structure strategy for large-scale systems integrating online adaptive constraints adjustment method and cooperative distributed DMC algorithm

Stabilizing Model Predictive Control Scheme for Piecewise Affine Systems with Maximal Positively Invariant Terminal Set

Multivariable Model Predictive Control for Integrating Processes with Input Constraints

Double-layered Model Predictive Control Strategy with Dynamic Trajectory Calculation

Double-layered model predictive control of state-space model

Analysis and System Design of Multi-convex Hull Stabilization Domain for Double-layered Model Predictive Control System

Steady-state Target Calculation Integrating Economic Optimization for Constrained Model Predictive Control

Steady‐state Target Calculation for Constrained Predictive Control Systems Based on Goal Programming

Double-layer model predictive control integrated with zone control

Stabilizing Model Predictive Control Strategy for Permanent Magnet Synchronous Motor with Multi-Variable Constraints

Two-Layer Model Predictive Control For Chemical Process Model With Integrating Controlled Variables

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM