Abstract:Continuum robots exhibit promising adaptability and dexterity for soft manipulation due to their intrinsic compliance. However, this compliance may lead to challenges in modeling as well as positioning and loading. In this paper, a virtual work-based static model is established to describe the deformation and mechanics of continuum robots with a generic rod-driven structure, taking the geometric constraint of the drive rods into account. Following this, this paper presents a novel variable stiffness mechanism powered by a set of embedded Shape Memory Alloy (SMA) springs, which can make the drive rods become ‘locked’ on the body structure with different configurations. The resulting effects of variable stiffness are then presented in the static model by introducing tensions of the SMA and friction on the rods. Compared with conventional models, there is no need to predefine the actuation forces of the drive rods; instead, actuation displacements are used in this new mechanism system with stiffness being regulated. As a result, the phenomenon that the continuum robot can exhibit an S-shaped curve when subject to single-directional forces is observed and analyzed. Simulations and experiments demonstrated that the presented mechanism has stiffness variation of over 287% and further demonstrated that the mechanism and its model are achievable with good accuracy, such that the ratio of positioning error is less than 2.23% at the robot end-effector to the robot length.

Kinematic Analysis and Experiment of an Elephant-Trunk-Like Robot Arm

Design and Kinematic Analysis of an Elephant-Trunk-like Robot with Shape Memory Alloy Actuators

Flexible Robotic Spine Actuated by Shape Memory Alloy

Design and Experiments of a Robotic Arm with a Rigid-Soft Coupling Structure

Kinematic Analysis of Bionic Elephant Trunk Robot Based on Flexible Series-Parallel Structure.

Locomotion Analysis and Optimization of Actinomorphic Robots with Soft Arms Actuated by Shape Memory Alloy Wires

Simplified Dynamical Model and Experimental Verification of an Underwater Hydraulic Soft Robotic Arm

Kinematic Analysis of Novel Soft Robotic Arm Based on Virtual Work Principle.

Locomotion modeling of an actinomorphic soft robot actuated by SMA springs

An Overview of Shape Memory Alloy-Coupled Actuators and Robots.

Modeling and Motion Control of a Soft Robot.

Design, Modeling and Motion Control of a Multi-Segment SMA Driven Soft Robotic Manipulator.

Locomotion of an Actinomorphic Soft Robot with Soft Composite Structures

Dynamics Analysis of Flexible Manipulator Driven by SMA Spring

Modeling and Motion Control of an Octopus-Like Flexible Manipulator Actuated by Shape Memory Alloy Wires

Kinematic Modeling and Control of a Novel Pneumatic Soft Robotic Arm

Mechanical Design of a 3-DOF Humanoid Soft Arm Based on Modularized Series Elastic Actuator

Inspired by Physical Intelligence of an Elephant Trunk: Biomimetic Soft Robot With Pre-Programmable Localized Stiffness

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

Design and motion analysis of soft robotic arm with pneumatic-network structure

Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness