Abstract:Hybrid mobile robots, which combine the advantages of serial and parallel robots and have the ability to realize processing in situ, have considerable application potential in the field of processing and manufacturing. In this paper, a hybrid mobile robot used for wind turbine blade polishing is presented. The robot combines an automated guided vehicle, a 2-DoF robotic arm, and a 3-RCU parallel module. To improve the accuracy, investigating the elasto-geometrical calibration of the robot is necessary. Considering that the 3-RCU parallel module has weak stiffness along the gravitational direction, the stiffness model was established to estimate the deformation caused by the gravity of the mobile platform, ball screws, and motors. Subsequently, a rigid-flexible coupling error model considering structural and stiffness parameter errors is established. Based on these, a parameter identification method for the simultaneous identification of structural and stiffness parameter errors is proposed herein. For the 2-DoF robotic arm with parallelogram mechanisms, an intuitive error model considering the posture error caused by the parallelogram mechanism errors is established. The regularized nonlinear least squares method was adopted for parameter identification. Thereafter, a compensation strategy for the hybrid mobile robot that comprehensively considers the pose errors of the 3-RCU parallel module and 2-DoF robotic arm is proposed. Finally, a verification experiment was performed on the prototype, and the results indicated that after elasto-geometrical calibration, the maximum/mean of the position and posture errors of the hybrid mobile robot decreased from 3.738 mm/2.573 mm to 0.109 mm/0.063 mm and 0.236°/0.179° to 0.030°/0.013°, respectively. Owing to the decrease in the robot pose errors, the quality of the polished surface was more uniform. The range and standard deviation of roughness distribution of the polished surface were reduced from 0.595 μm and 0.248 μm to 0.397 μm and 0.127 μm. The methods proposed herein have reference significance for elasto-geometrical calibration of other parallel or hybrid robots.

Kinematic Calibration and Compensation for a Robot with Structural Deformation

A Two-Stage Parameter Identification Method and Compensation Verification for Heavy Load Robot

Separable Nonlinear Least Squares Algorithm for Robust Kinematic Calibration of Serial Robots.

A Hybrid Analytical and Data-driven Modeling Approach for Calibration of Heavy-duty Cartesian Robot

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

A Modeling and Calibration Method of Heavy-Duty Automated Fiber Placement Robot Considering Compliance and Joint-Dependent Errors

Kinematic calibration of over-constrained robot with geometric error and internal deformation

Kinematic Calibration and Forecast Error Compensation of A 2-Dof Planar Parallel Manipulator

Efficient Model-Free Calibration of a 5-Degree of Freedom Hybrid Robot

Kinematic Calibration of a 2-DOF Over-Constrained Parallel Manipulator Using Force Data

Elasto-geometrical calibration of a hybrid mobile robot considering gravity deformation and stiffness parameter errors

Kinematic Calibration for a Large Hybrid Spraying Robot Considering Gravity Deformation

Kinematic Calibration of a 2 Degree of Freedom Translational Parallel Robot

Model-based kinematic and non-kinematic calibration of a 7R 6-DOF robot with non-spherical wrist

Kinematic Calibration Method for Large-Sized 7-Dof Hybrid Spray-Painting Robots

Non-Geometric Error Compensation for Long-Stroke Cartesian Robot With Semi-Analytical Beam Deformation and Gaussian Process Regression Model

Kinematic calibration of a 6-DOF hybrid robot by considering multicollinearity in the identification Jacobian

Accurate Kinematic Calibration of a Six-Dof Serial Robot by Using Hybrid Models with Reduced Dimension and Minimized Linearization Errors

Kinematic Calibration Methodology of Hybrid Manipulator Containing Parallel Topology with Main Limb

Calibration of a (6+3)-Dof Kinematically Redundant Parallel Mechanism Based on Hybrid Identification Algorithm and Two-Step Compensation Strategy