Abstract:Lithium-rich transition metal oxides are considered a promising cathodic solutions in Li-ion batteries to meet the growing energetic demand, thanks to their high specific capacity and operational voltage [1-2]. Li-rich layered materials have a general stoichiometry Li1+xTM1-xO2, in which TM is a blend of transition metals, as Ni, Mn, Co [2]. They stand out due to their high lithium concentration and specific capacity [1-2]. The higher capacity of Lithium-Rich can be attributed to the specific anionic redox reaction in the bulk at above 4.5 V. Nevertheless, large irreversible capacity loss in the first cycle, poor rate capability, mean working potential decay upon cycling and cobalt content are still major drawbacks that are hindering commercialization. In order to make these materials up scalable to industrial production, it is important to consider the reduction of costs and the toxicity of raw materials, in particular cobalt. Cobalt reduction has been identified as major driver to improve the environmental benignity of batteries and the sustainability of the overall production-consumption-recycling lifecycle. Several efforts to reduce these problems have been made, including the development of different synthetic strategies, doping and surface modification. The most, widely explored, chemical strategy to mitigate the voltage decay and structural degradation in Lithium Rich cathodes is the doping. Elemental doping can be divided into cation and anion doping. As an example, incorporation of redox inactive metals, such as Al, Zr, Ti, has been proposed in order to stabilize the lattice as well as the partial replacement of lithium ions with other alkali cations, e.g. K and Na; or doping the oxygen anion sublattice. In this communication, we present our doping approaches. In particular, the simultaneous replacement of cobalt in the layered structure with aluminum and lithium (over-lithiation). Moreover, we present over-lithiated Co-free materials where the introduction of different amount of iron has been investigated. The characterization of these novel layered materials is reported in terms of composition, structure, morphology and electrochemical performances. These approaches can be applied as a strategy to mitigate the voltage decay and reduce the Cobalt content. [1] Ji, X. et al. Journal of Power Sources 487, (2021). [2] Zhao, S. et al. Angewandte Chemie - International Edition 60, 2208–2220 (2021).

Targeted Surface Doping with Reversible Local Environment Improves Oxygen Stability at the Electrochemical Interfaces of Nickel-Rich Cathode Materials.

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Regulating the Charge Distribution of Oxygen by High-Entropy Doping to Stabilize Single-Crystal Ni-Rich Cathode Materials

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

Regulating Electronic Structure of Anionic Oxygen by Ti4+ Doping to Stabilize Layered Li-rich Oxide Cathodes for Li-ion Batteries

Enhancing the Structural Stability and Electrochemical Performance of High-Nickel Cathode Materials through Ti Doping with an Exothermic Non-oxide Precursor

Enhancing Thermal and High-Voltage Cycling Stability of Ni-Rich Layered Cathodes through a Ti-Doping-Induced Surface-Disordered Structure

Simultaneous Enhancement of Interfacial Stability and Kinetics of Single-Crystal LiNi0.6Mn0.2Co0.2O2 Through Optimized Surface Coating and Doping

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Ti‐Gradient Doping to Stabilize Layered Surface Structure for High Performance High‐Ni Oxide Cathode of Li‐Ion Battery

Facile and scalable dry surface doping technique to enhance the electrochemical performance of LiNi(0.64)Mn(0.2)Co(0.16)O(2)cathode materials

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Zn/Ti dual concentration-gradients surface doping to improve the stability and kinetics for Li-rich layered oxides cathode

Feasibility to Improve the Stability of Lithium-Rich Layered Oxides by Surface Doping

Exploring the nanoscale origin of performance enhancement in Li$_{1.1}$Ni$_{0.35}$Mn$_{0.55}$O$_2$ batteries due to chemical doping

Surface Doping to Enhance Structural Integrity and Performance of Li‐Rich Layered Oxide

Targeted Doping Enables Multi-Scale Stress Regulation for High Reliable Ni-Rich Layered Cathodes

Doping‐Induced Surface and Grain Boundary Effects in Ni‐Rich Layered Cathode Materials

Unveiling Nickel Chemistry in Stabilizing High‐Voltage Cobalt‐Rich Cathodes for Lithium‐Ion Batteries

Doping Strategy to Improve the Electrochemical Behavior of Lithium Rich Transition Metal Oxides As Cathodes for Lithium-Ion Batteries