Abstract:Bismuth (Bi) is a promising anode candidate for sodium ion batteries (SIBs) with a high volumetric capacity (3765 mA h cm-3) and moderate working potential but suffers from large volume change (ca. 250%) during the sodiation/desodiation process, resulting in pulverization of the electrode, electrical contact loss, excessive accumulation of solid electrolyte interfaces, etc., devastating the cycling stability of the electrode seriously. Addressing this issue significantly relies on rational micro- and nano-structuring. Herein, we prepared a 3D multi-layered composite assembly of Bi/carbon heterojunctions with 0D bismuth nanospheres distributed and anchored on 2D nitrogen-doped carbon nanosheets (NCSs), using a preorganization strategy by taking full advantage of the strong complexation ability of Bi3+. The multi-layered composite assembly is periodic and close-packed, with Bi nanospheres <25 nm, carbon nanosheets ∼30 nm, and an average interlayer space of ∼75 nm. Such a specific architecture provides abundant electrochemically active surfaces and ion migration channels as the Bi nanospheres are attached to the 2D nitrogen-doped carbon nanosheets via a point-to-surface pattern. Moreover, the mono-layer Bi nanospheres oriented along the 2D-surface of NCSs are kinetically favorable for the recognition of Na+ by the active sites of Bi nanospheres as well as for avoiding the long distance migration of Na+ (external diffusion of Na+). Furthermore, thermodynamically, the small size and high surface energy of ultrasmall Bi nanospheres could contribute to high ion mobility (internal diffusion of Na+) and promote electrochemical reactions as well. The multi-layered composite assembly of Bi@NCSs (ML-Bi@NCSs) not only provides a robust 3D framework guaranteeing the whole structural stability but also ensures direct and full contact of each active nano-building block with electrolyte, thereby forming a high-throughput electron/ion transport system. When evaluated as the anode for SIBs, ML-Bi@NCSs deliver superior high-rate capability up to 30 A g-1 (specific capacity: 288 mA h g-1) and long-term cycling stability (capacity retention: 95.8% after 5000 cycles at 10 A g-1 and 90.6% after 10 000 cycles at 20 A g-1, respectively).

Bismuth Nanoparticle@Carbon Composite Anodes for Ultralong Cycle Life and High-Rate Sodium-Ion Batteries.

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Electrolytic bismuth/carbon nanotubes composites for high-performance sodium-ion battery anodes

Bi@C Core-Shell Nanostructure As Anode for Sodium-Ion Batteries from One-Step Arc Discharge

Large-Scale Fabrication of Bismuth Nanoparticle Embedded N-Doped Carbon As Anodes for Stable Sodium/Potassium-Ion Batteries

Bi nanoparticles confined in N,S co-doped carbon nanoribbons with excellent rate performance for sodium-ion batteries

A Multi-Layered Composite Assembly of Bi Nanospheres Anchored on Nitrogen-Doped Carbon Nanosheets for Ultrastable Sodium Storage

Facile Galvanic Replacement Construction of Bi@C Nanosheets Array As Binder‐Free Anodes for Superior Sodium‐Ion Batteries

Novel Bismuth Nanoflowers Encapsulated in N‐Doped Carbon Frameworks as Superb Composite Anodes for High‐Performance Sodium‐Ion Batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Bismuth nanoparticles confined in multi-walled carbon nanotubes toward enhanced sodium storage anodes

One-step large-scale fabrication of Bi@N-doped carbon for ultrahigh-rate and long-life sodium-ion battery anodes

Scalable Fabrication of Bi@N-doped Carbon As Anodes for Sodium/potassium-Ion Batteries with Enhanced Electrochemical Performances

Structure and Interface Engineering of Ultrahigh-Rate 3D Bismuth Anodes for Sodium-Ion Batteries.

Bismuth Nanoparticles@carbon Composite As a Stable and High Capacity Anode for High-Voltage Bismuth-Manganese Batteries

Double Restriction of Bismuth Nanoparticles by Carbon Matrixes for Ultralong−lifespan Sodium Storage

Graphene‐Encapsulated Nitrogen‐doped Carbon@Bi Enables Rapid, Ultrahigh and Durable Sodium Storage

Vapor-phase derived ultra-fine Bismuth nanoparticles embedded in carbon nanotube networks as anodes for sodium and potassium ion batteries

Double-layer carbon coated on the micrometer bismuth by photothermal effect as anode for high-rate sodium-ion batteries

Bismuth−Antimony Alloy Embedded in Carbon Matrix for Ultra-Stable Sodium Storage

Bismuth-constructed High-Speed Channeled for Bi/Sb2SnO5@PCFs Composite As High-Rate and Long-Life Anode for Sodium-Ion Batteries