Abstract:Eliminating pharmaceuticals with trace concentrations in water is crucial in water purification. Developing an effective adsorbent for removing micropollutants from water has aroused great research interest. In this study, the feasibility of nitrogen-rich bio-based metal–organic framework (MOF)-derived carbon as an effective material to eliminate micropollutants from the water environment is discussed. A mixed ligand approach has been applied to synthesize IISERP-MOF27 successfully via the solvothermal method. Adenine, which is non-toxic, easily obtained, and cheap, was introduced into the structure. The novel heterogeneous porous carbon was produced by pyrolyzation with an extremely high surface area (SBET = 980.5 m2/g), which is 12.8 times higher than that of pristine MOFs. Studies show that the highest surface area and abundant mesoporous structures (Vpore = 0.496 cm3/g) can be obtained when the MOFs are pyrolyzed at 900 °C. The saturated adsorption amount for sulfamethylthiazole (SMX) over MOF-derived carbon can reach 350.90 mg/g with a fast initial adsorption rate of 315.29 (mg/g·min). By adding the second linker adenine as the precursor, the adsorption performance for SMX was made extremely better than that of traditional active carbon (AC) and pyrolyzed ZIF-8(ZIF-8-C), one of the most classic Zn-MOFs. The adsorption capacity calculated by the Langmuir model (R2 = 0.99) for SMX over bio-C-900 was 4.6 and 13.3 times more than those of AC and ZIF-8-C, respectively. The removal percentage of six representative pharmaceuticals can be well correlated to the structural parameter log Kow of each pharmaceutical, indicating the hydrophobic interaction should be one of the major mechanisms for the adsorption in water. This study offers a strategy to develop novel carbon materials to remove pharmaceuticals.

Nitrogen-doped Flower-Like Porous Carbon Nanostructures for Fast Removal of Sulfamethazine from Water

Catalytic Ceramic Nanofiber Membrane Coupled with Ozonation for Degradation of Sulfamethoxazole: Critical Parameters, Mechanisms and Applicability

Hierarchical magnetic nitrogen-doped porous carbon derived from a covalent organic framework (COF) for the highly efficient removal of sulfamerazine

Novel N-doped Hierarchically Porous Carbons Derived from Sustainable Shrimp Shell for High-Performance Removal of Sulfamethazine and Chloramphenicol

A Novel Al0-CNTs-Fe3O4 for the Removal of Low Concentration Sulfamethoxazole from Aqueous Solution by a Couple of Adsorption and Degradation Processes

Carbon Nanotube Supported Sludge Biochar As an Efficient Adsorbent for Low Concentrations of Sulfamethoxazole Removal.

Effective Removal of Sulfonamides Using Recyclable MXene-Decorated Bismuth Ferrite Nanocomposites Prepared via Hydrothermal Method

MCM-48 modified magnetic mesoporous nanocomposite as an attractive adsorbent for the removal of sulfamethazine from water.

Surface Imprinted Core‐shell Nanorod with Ultrathin Water‐compatible Polymer Brushes for Specific Recognition and Adsorption of Sulfamethazine in Water Medium

The Mechanism of Fenton-Like System by N, S-Doped Mesoporous Nanocarbon for the Degradation of Sulfamethoxazole

Efficacy of carbonaceous nanocomposites for sorbing ionizable antibiotic sulfamethazine from aqueous solution

Preparation of a Series of Highly Efficient Porous Adsorbent PGMA-N Molecules and Its Application in the Co-Removal of Cu(II) and Sulfamethoxazole from Water

Efficient Removal of Micropollutants by Novel Carbon Materials Using Nitrogen-Rich Bio-Based Metal-Organic Framework (mofs) As Precursors

The enhanced mechanism of Fe(III)/H 2 O 2 system by N, S-doped mesoporous nanocarbon for the degradation of sulfamethoxazole

Improved Adsorption and Charge Transfer Capacity by Coupling G-C3n4 and NH2-MIL-125 for Efficient Degradation of Sulfamethoxazole in Water: Characterization, Degradation Efficiency, Influence Factors, and Mechanism

A novel adsorbent of Ag-FMWCNTs for the removal of SMX from aqueous solution

Hydrothermal N-doping, magnetization and ball milling co-functionalized sludge biochar design and its selective adsorption of trace concentration sulfamethoxazole from waters

Scalable Preparation of Hierarchical Porous Carbon from Lignin for Highly Efficient Adsorptive Removal of Sulfamethazine Antibiotic

From Lignin to Three-Dimensional Interconnected Hierarchically Porous Carbon with High Surface Area for Fast and Superhigh-Efficiency Adsorption of Sulfamethazine

Ball milling boosted hydrothermal N-doped sludge-derived biochar towards efficiently adsorptive removal of sulfamethoxazole from waters: Behavior, mechanism and DFT study

N-nitrosodimethylamine Removal by a Novel Silver/sulfur-Coated Nanoscale Zero-Valent Iron/activated Carbon Composite: Adsorption Kinetics, Mechanisms, and Degradation Pathways