Single Molybdenum Atom Anchored on 2D Ti2NO2 MXene As a Promising Electrocatalyst for N2 Fixation.

Yuwen Cheng,Jianhong Dai,Yan Song,Yumin Zhang

DOI: https://doi.org/10.1039/c9nr05402b

IF: 6.7

2019-01-01

Nanoscale

Abstract:Mo anchored on Ti2NO2 (Mo/Ti2NO2) surface possesses superior NRR performance, with an overpotential ηNRR of 0.16 V via enzymatic mechanism.

What problem does this paper attempt to address?

Enhancing N2Fixation Activity by Converting Ti3C2MXenes Nanosheets to Nanoribbons

Hua Wei,Qian Jiang,Claudio Ampelli,Shiming Chen,Siglinda Perathoner,Yuefeng Liu,Gabriele Centi

DOI: https://doi.org/10.1002/cssc.202001719

IF: 8.4

2020-01-01

ChemSusChem

Abstract:Metal carbides M2C (MXenes) with two-dimensional (2D) structure have been indicated as promising materials for N(2)fixation, with the activity being related to edge planes. Here, it is instead demonstrated that the transformation from a 2D- (nanosheets) to a 3D-type nanostructure (nanoribbons) leads to a significant enhancement of the N(2)fixation activity due to the formation of exposed Ti-OH sites. A linear relationship is observed between ammonia formation rate and amount of oxygen on the surface of Ti(3)C(2)MXene.
Atomic Modulation and Phase Engineering of MoS2 2 for Boosting N2 2 Reduction

Yansong Jia,Guining Shao,Li Yang,Ruizhe Yang,Ming Huang,Hua Huang,Min Liu,Gai Huang,Qunjie Lu,Chaohua Gu

DOI: https://doi.org/10.20517/microstructures.2023.95

2024-01-01

Microstructures

Abstract:Electrochemical nitrogen reduction reaction (ENRR) has emerged as a potential alternative to the conventional Haber-Bosch process for ammonia production. However, ENRR technology is still restricted by the limited Faradaic efficiency due to the hard-to-break N-N triple bond. Herein, inspired by the biomimetic catalyst, we developed a Fe-modulated MoS2 2 catalyst (named Fe@MoS2) 2 ) as an efficient ENRR catalyst. Raman spectra, coupled with the X-ray absorption spectroscopy, demonstrate the introduction of Fe into the MoS2 2 lattice and achieve partial 2H to 1T phase conversion. The presence of S-vacancies on MoS2 2 substrates was observed on scanning transmission electron microscopy images. Operando infrared absorption spectroscopy confirms that the constructed catalytic site significantly reduces barriers to nitrogen activation. The synthesized Fe@MoS2, 2 , with its superior geometric and electronic structures, exhibits a remarkable Faradaic efficiency of 19.7 +/- 5.5% at-0.2 V vs. Reversible Hydrogen Electrode and a high yield rate of 20.2 +/- 5.3 mu g h-1 mg-1 at-0.8 V vs. Reversible Hydrogen Electrode. Therefore, this work provides a fresh direction for designing novel catalysts, eventually boosting the nitrogen reduction reaction kinetics and accelerating the ENRR application.
Atomic Modulation and Phase Engineering of MoS2 for Boosting N2 Reduction

Yansong Jia,Guining Shao,Li Yang,Ruizhe Yang,Ming Huang,Hua Huang,Min Liu,Gai Huang,Qunjie Lu,Chaohua Gu

DOI: https://doi.org/10.20517/microstructures.2023.95

2024-01-01

Microstructures

Abstract:Electrochemical nitrogen reduction reaction (ENRR) has emerged as a potential alternative to the conventional Haber-Bosch process for ammonia production. However, ENRR technology is still restricted by the limited Faradaic efficiency due to the hard-to-break N-N triple bond. Herein, inspired by the biomimetic catalyst, we developed a Fe-modulated MoS2 catalyst (named Fe@MoS2) as an efficient ENRR catalyst. Raman spectra, coupled with the X-ray absorption spectroscopy, demonstrate the introduction of Fe into the MoS2 lattice and achieve partial 2H to 1T phase conversion. The presence of S-vacancies on MoS2 substrates was observed on scanning transmission electron microscopy images. Operando infrared absorption spectroscopy confirms that the constructed catalytic site significantly reduces barriers to nitrogen activation. The synthesized Fe@MoS2, with its superior geometric and electronic structures, exhibits a remarkable Faradaic efficiency of 19.7 ± 5.5% at -0.2 V vs. Reversible Hydrogen Electrode and a high yield rate of 20.2 ± 5.3 μg h-1 mg-1 at -0.8 V vs. Reversible Hydrogen Electrode. Therefore, this work provides a fresh direction for designing novel catalysts, eventually boosting the nitrogen reduction reaction kinetics and accelerating the ENRR application.
The synergy between oxidized molybdenum and covalent triazine frameworks for electrocatalytic nitrogen fixation

Wenwen Lin,Zihao Zhang,Hao Chen,Gaobo Lin,Yifeng Liu,Siyu Yao,Liang Wang,jie Fu

DOI: https://doi.org/10.22541/au.165461779.95215856/v1

2022-01-01

Abstract:Although Mo-dependent nitrogenase and synthetic molecular complexes have attracted widespread attention in electrochemical nitrogen reduction, the activity of Mo-based catalysts for nitrogen reduction is low. Herein, molybdenum oxide nanoparticles were supported on charge-modulated conjugated triazine frameworks (Mo/CTF-I) via ion exchange reaction. Compared with Mo/CTF, the modified Mo/CTF-I maintains high specific surface area and microporous structure after metal loading and thermal treatment, and exposes high density MoOx as active sites. This strong interaction between MoOx and CTF-I induces the electron transfer from Mo to support to form MoOx with a valence state of 5+ and lowers the energy barrier to transfer the donated electrons to the empty anti-bonding π orbitals of N≡N. Electrochemical measurements proved that 5% Mo/CTF-I exhibited the highest NRR activity with a faradaic efficiency of 27.3% and an NH3 yield rate of 7.23 mg h-1 gcat.-1 at -0.405 V vs. RHE.
Unveiling the Underlying Mechanism of Transition Metal Atoms Anchored Square Tetracyanoquinodimethane Monolayers as Electrocatalysts for N 2 Fixation

Shengyao Lv,Chunxiang Huang,Guoliang Li,Liming Yang,Sheng‐Yao Lv,Chun‐Xiang Huang,Li‐Ming Yang

DOI: https://doi.org/10.1002/eem2.12277

2022-01-03

Abstract:We for the first time systematically studied the structures and electrochemical nitrogen reduction reaction (NRR) properties of two-dimensional single transition-metal anchored square tetracyanoquinodimethane monolayers (labeled as: TM-sTCNQ, TM = 3d, 4d, 5d series transition metals) by employing density functional theory method. Through high-throughput screenings and full reaction path researches, two promising electrochemical NRR catalysts Nb-sTCNQ and Mo-sTCNQ have been obtained. The NRR onset potential on Nb-sTCNQ is as low as −0.48 V. Furthermore, the Nb-sTCNQ catalyst can quickly desorb NH3 produced with a free energy of 0.65 eV, giving Nb-sTCNQ excellent catalytic cycle performance. The high catalytic activity of the two materials might be attributed to the effective charge transfer between active center and adsorbed N2, which enables the active center to adsorb and activate inert N2 molecules well, and the reduction processes require small energy input (i.e., the maximum free energy changes are small). This work provides insights for finding highly efficient, stable and low-cost NRR electrocatalysts. We hope our results can promote further experimental and theoretical research of this field.

materials science, multidisciplinary
Single Faceted Two-Dimensional Mo2C Electrocatalyst for Highly Efficient Nitrogen Fixation

Kun Ba,Ganlin Wang,Tong Ye,Xirui Wang,Yangye Sun,Hanqi Liu,Anqi Hu,Zhenyu Li,Zhengzong Sun

DOI: https://doi.org/10.1021/acscatal.0c01127

IF: 12.9

2020-01-01

ACS Catalysis

Abstract:Electrocatalytic reduction of N-2 to NH3 under an ambient atmosphere is highly desirable and extremely critical for energy-efficient nitrogen utilization. Inspired by the natural MoFe protein-based enzyme, the nitrogenase, we exploited this electrochemical process with a unique two-dimensional catalyst, namely, molybdenum carbide (Mo2C). The catalyst is synthesized through a chemical vapor deposition method, with a highly orientated (200) facet of the alpha-Mo2C phase. A remarkable Faradaic efficiency as high as 40.2% has been achieved on the (200) faceted alpha-Mo2C during the nitrogen reduction reaction (NRR). Density functional theory calculations confirm that rate-determining steps *NNH2 -> NNH3 and *NH -> *NH2 experience a low energy barrier on the (200) surface following the proton-electron coupled, distal associated mechanism. To protect Mo from leaching during the NRR process, we also grew layers of graphene on top of Mo2C, forming a chemically enduring two-dimensional heterostructured electrode.
Anchoring Ultra-Small Molybdenum Oxide Species on Covalent Triazine Frameworks for Efficient Electrochemical Nitrogen Fixation

Wenwen Lin,Teng Guo,Zihao Zhang,Hao Chen,Gaobo Lin,Yifeng Liu,Siyu Yao,Liang Wang,Bolong Li,Jianghao Wang,Jie Fu,Pingkai Ouyang

DOI: https://doi.org/10.1039/d2cc06983k

IF: 4.9

2023-01-01

Chemical Communications

Abstract:We report a smart ion-exchange strategy to anchor molybdenum oxide particles on charge-modulated conjugated triazine frameworks (Mo/CTF-I) for electrochemically fixing nitrogen.
Au Sub-Nanoclusters on TiO 2 toward Highly Efficient and Selective Electrocatalyst for N 2 Conversion to NH 3 at Ambient Conditions.

Miao-Miao Shi,Di Bao,Ba-Ri Wulan,Yong-He Li,Yue-Fei Zhang,Jun-Min Yan,Qing Jiang

DOI: https://doi.org/10.1002/adma.201606550

IF: 29.4

2017-01-01

Advanced Materials

Abstract:As the N equivalent to N bond in N-2 is one of the strongest bonds in chemistry, the fixation of N-2 to ammonia is a kinetically complex and energetically challenging reaction and, up to now, its synthesis is still heavily relying on energy and capital intensive Haber-Bosch process (150-350 atm, 350-550 degrees C), wherein the input of H-2 and energy are largely derived from fossil fuels and thus result in large amount of CO2 emission. In this paper, it is demonstrated that by using Au sub-nanoclusters (approximate to 0.5 nm) embedded on TiO2 (Au loading is 1.542 wt%), the electrocatalytic N-2 reduction reaction (NRR) is indeed possible at ambient condition. Unexpectedly, NRR with very high and stable production yield (NH3: 21.4 mu g h(-1) mg(cat.)(-1), Faradaic efficiency: 8.11%) and good selectivity is achieved at -0.2 V versus RHE, which is much higher than that of the best results for N-2 fixation under ambient conditions, and even comparable to the yield and activation energy under high temperatures and/or pressures. As isolated precious metal active centers dispersed onto oxide supports provide a well-defined system, the special structure of atomic Au cluster would promote other important reactions besides NRR for water splitting, fuel cells, and other electrochemical devices.
Efficient Electrocatalytic N2 Fixation with MXene under Ambient Conditions

Yaru Luo,Gao-Feng Chen,Li Ding,Xinzhi Chen,Liang-Xin Ding,Haihui Wang

DOI: https://doi.org/10.1016/j.joule.2018.09.011

IF: 46.048

2018-01-01

Joule

Abstract:The current efficiency of NH3 electrosynthesis from N2 and H2O is ultralow as a result of poor selectivity in most catalysts. Here, we demonstrate that under ambient conditions, MXene (Ti3C2Tx) nanosheets attached to a vertically aligned metal host can achieve a high faradic efficiency (5.78%) at an ultralow potential for NH3 electrosynthesis. On the basis of experimental and theoretical evidence, the basal plane of MXene is relatively inert, and its higher activity is related to a greater number of exposed edge sites. This work elucidates that significantly improved selectivity of NH3 electrosynthesis can be achieved by tuning active sites and retarding hydrogen evolution activity. The proposed strategy provides a new opportunity to optimize the surface properties of 2D catalysts for efficient N2 fixation under ambient conditions.
Interface Catalysis of Nickel Molybdenum (NiMo) Alloys on Two-Dimensional (2D) MXene for Enhanced Hydrogen Electrochemistry

Tong Zhang,Shaun Debow,Fuzhan Song,Yuqin Qian,William R Creasy,Brendan G DeLacy,Yi Rao

DOI: https://doi.org/10.1021/acs.jpclett.1c02676

2021-11-25

Abstract:Development of efficient bifunctional nonprecious metallic electrocatalysts for hydrogen electrochemistry in alkaline solution is of importance to enable commercialization of a low-cost alkaline hydrogen fuel cell and water electrolyzer, but it is very challenging. Two-dimensional (2D) MXene-based electrocatalysts hold tremendous potential for the applications of hydrogen fuel cell and water electrolyzer. Here, we successfully immobilized transition-metal-based NiMo nanoparticles (NPs) on 2D Ti3C2Tx (Tx: surface terminations, such as O, OH, or F) surfaces by a wet chemical method. Our results demonstrate that the NiMo NPs are monodispersed on Ti3C2Tx with surface functionalization. These monodisperse NPs resulted in superior hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR) activities in an alkaline media. The NiMo NPs/Ti3C2Tx in 1.0 M KOH yielded an HER current of -10 mA cm-2 at -0.044 V vs reversible hydrogen electrode (RHE), nearly 232 mV smaller than that of the parent NiMo NPs. The NiMo NPs/Ti3C2Tx produced an HOR current density of 1.5 mA cm-2 at 0.1 V vs RHE. Density functional theory (DFT) results further reveal that Ti3C2Tx support can facilitate the charge transfer to metallic NPs and tailor the electronic structure of catalytic sites, resulting in optimized adsorption free energies of H* species for hydrogen electrochemistry. This work provides a facile and universal strategy in the development of 2D Ti3C2Tx with nonprecious metals for low-cost bifunctional hydrogen electrocatalysts.
1 T-phase molybdenum sulfide nanodots enable efficient electrocatalytic nitrogen fixation under ambient conditions

Xuesong Xu,Xiujuan Tian,Benteng Sun,Zhangqian Liang,Hongzhi Cui,Jian Tian,Minhua Shao

DOI: https://doi.org/10.1016/j.apcatb.2020.118984

2020-09-01

Abstract:Herein, 1T-phase MoS2 nanodots (NDs) anchored to g-C3N4 (1T-MoS2/g-C3N4) are firstly developed to operate as a highly efficient catalyst for electrochemical N2 fixation with superior selectivity. 1T-MoS2/g-C3N4 composite presents outstanding NRR performance with a FE of 20.48% and a NH3 yield rate of 29.97 µg h−1 mg−1cat. at -0.3 V vs. RHE. Furthermore, 1T-MoS2/g-C3N4 composite also shows outstanding electrochemical stability and durability. 15N isotopic labeling experiment confirms that nitrogen in produced ammonia originates from N2 in electrolyte rather than the decomposition of g-C3N4. DFT calculations reveal the optimal reaction path of NRR with both associative distal and alternating pathways. This work may offer a hopeful lead for designing effective non-noble-metal NRR electrocatalysts.

chemistry, physical,engineering, chemical, environmental
Molybdenum Carbide Nanodots Enable Efficient Electrocatalytic Nitrogen Fixation under Ambient Conditions

Hui Cheng,Liang‐Xin Ding,Gao‐Feng Chen,Lili Zhang,Jian Xue,Haihui Wang,Liang-Xin Ding,Gao-Feng Chen

DOI: https://doi.org/10.1002/adma.201803694

IF: 29.4

2018-10-01

Advanced Materials

Abstract:Electrocatalytic nitrogen fixation is considered a promising approach to achieve NH3 production. However, due to the chemical inertness of nitrogen, it is necessary to develop efficient catalysts to facilitate the process of nitrogen reduction. Here, molybdenum carbide nanodots embedded in ultrathin carbon nanosheets (Mo2 C/C) are developed to serve as a catalyst candidate for highly efficient and robust N2 fixation through an electrocatalytic nitrogen reduction reaction (NRR). The as-synthesized Mo2 C/C nanosheets show excellent catalytic performance with a high NH3 yield rate (11.3 µg h-1 mg-1 Mo2C ) and Faradic efficiency (7.8%) for NRR under ambient conditions. More importantly, the isotopic experiments using 15 N2 as a nitrogen source confirm that the synthesized ammonia is derived from the direct supply of nitrogen. This result also demonstrates the possibility of high-efficiency nitrogen reduction even though accompanied with vigorous hydrogen evolution.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High-Throughput Screening of Nitrogen Reduction Reaction on Single Atom@1T'-MoS 2

Pengwei Zhao,Haozhi Wang,Zhong Huang,Binbin Fan,Yuan Liu,Zexiang Yin,Yang Wang,Xuerong Zheng,Yida Deng,Xiaobin Fan

DOI: https://doi.org/10.1016/j.apsusc.2023.157480

IF: 6.7

2023-05-14

Applied Surface Science

Abstract:Electrochemical synthesis of ammonia through nitrogen reduction reaction (NRR) is cost-effective and energy-effective compared to the conventional Haber-Bosch process. However, the slow activation kinetics of N 2 hindered the development of active and selective catalysts. In this work, we showed that transition metal (TM) single atoms anchored on monolayer molybdenum disulfide (MoS 2 ) with 1T phase could promote its phase transition to 1T' due to broken surface symmetry induced by TM atoms. By combining the high-throughput screening with DFT calculations in transition metals, two TM elements (V, Ti) anchored on 1T'-MoS 2 were proved to be promising candidates in N 2 fixation. The V and Ti single-atom catalyst exhibits low Gibbs free energy barrier, and Ti single-atom catalyst shows the highest selectivity towards NH 3 . Moreover, the stability of single-atom '-MoS 2 was measured with the ab initio molecular dynamics (AIMD) simulations. The density of states (DOS) and surface charge analysis were conducted to reveal the origin of improved activities. Our results pave the way to design more innovative single-atom catalysts for high-performance electrocatalytic NRR.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Fabrication of nickel nanoparticles anchored on a 2D double transition metal MXene for efficient hydrogen and oxygen evolution reactions

Nagaraj Murugan,Sadhasivam Thangarasu,Priyadarshini Venkatachalam,Mrunal Bhosale,Min Kang,Minseo Yu,Tae Hwan Oh,Yoong Ahm Kim

DOI: https://doi.org/10.1016/j.ijhydene.2024.09.189

IF: 7.2

2024-10-12

International Journal of Hydrogen Energy

Abstract:Creating cost-effective and high-performing bifunctional electrocatalysts is a viable alternative to expensive noble metal electrocatalysts for water-splitting applications. A double transition metal MXene (Mo 2 TiC 2 T x ) has recently shown exceptional electrocatalytic activity because of its high conductivity, hydrophilicity, mechanical stability, electron mobility, and rich surface chemistry. In this study, we have created efficient bifunctional electrocatalytic properties of nano Ni decorated Mo 2 TiC 2 T x MXene (Ni–Mo 2 TiC 2 T x ). The efficient and homogeneous incorporation of Ni on the 2D Mo 2 TiC 2 T x surface and between the layers demonstrates remarkable electrocatalytic efficiency for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Among the different combinations, the 15 mmol Ni–Mo 2 TiC 2 T x showed lower overpotential for the HER (ƞ 10 = 153.9 mV) and OER (ƞ 10 = 200.5 mV). Moreover, the Ni–Mo 2 TiC 2 T x based electrocatalysts exhibit satisfactory electrochemical stability up to 5000 cycles. During the HER and OER process, Ni and Mo cations form a new oxy-hydroxide layer on the surface in the OH − environment indicating a faster surface self-reconstruction process of the surface structure and Ni/Mo oxy-hydroxide layer interacts with O and H atoms of adsorbed water and thus leading to superior HER and OER activity. This study introduces a straightforward and effective approach to creating a new category of MXene heterostructures, which significantly boosts the performance and durability of catalysts for the HER and the OER showing promise for future applications.

energy & fuels,electrochemistry,chemistry, physical
Ambient Electrochemical Nitrogen Fixation over a Bifunctional Mo-(O-C-2)(4) Site Catalyst

Shengbo Zhang,Tongfei Shi,Ke Li,Qiao Sun,Yue Lin,Li Rong Zheng,Guozhong Wang,Yunxia Zhang,Huajie Yin,Haimin Zhang

DOI: https://doi.org/10.1021/acs.jpcc.1c10039

2022-01-01

The Journal of Physical Chemistry C

Abstract:The electrochemical synthesis of NH3 and NO3- by the N-2 reduction reaction (NRR) and the N-2 oxidation reaction (NOR) under ambient conditions utilizing H2O as the hydrogen and oxygen source has aroused great attention. Here, we report the fabrication of oxygen-coordinated molybdenum (Mo) single atoms anchored on carbon (Mo-O-C) using bacterial cellulose (BC) as the impregnation regulator and carbon source. As a result, the as-synthesized Mo-O-C as an electrocatalyst exhibits superior bifunctional NRR and NOR activities with high stability. A superb NH3 yield rate of 248.6 +/- 12.9 mu g h(-1) mg(cat.)(-1) and a faradaic efficiency (FE) of 43.8 +/- 2.3% can be obtained at -0.20 V (vs RHE) by the Mo-O-C-catalyzed NRR, and Mo-O-C can also afford a NO3- yield rate of 217.1 +/- 13.5 mu g h(-1) mg(cat.)(-1) with a FE of 7.8 +/- 0.5% at 2.35 V (vs RHE) for the NOR. The synchrotron-based X-ray absorption spectra and theoretical calculation results unveil that the O-coordinated molybdenum configuration of Mo-(O-C-2)(4) anchored on carbon is the most stable single-atom structure as the catalytic active sites for N-2 adsorption, activation, and bifunctional hydrogenation/oxidation reactions.
High-Performance Electrocatalytic Conversion of N-2 to NH3 Using Oxygen-Vacancy-Rich TiO2 in Situ Grown on Ti3C2Tx MXene

Yanfeng Fang,Zaichun Liu,Jingrui Han,Zhaoyong Jin,Yaqian Han,Faxing Wang,Yusheng Niu,Yuping Wu,Yuanhong Xu

DOI: https://doi.org/10.1002/aenm.201803406

IF: 27.8

2019-01-01

Advanced Energy Materials

Abstract:To achieve the energy-effective ammonia (NH3) production via the ambient-condition electrochemical N-2 reduction reaction (NRR), it is vital to ingeniously design an efficient electrocatalyst assembling the features of abundant surface deficiency, good dispersibility, high conductivity, and large surface specific area (SSA) via a simple way. Inspired by the fact that the MXene contains thermodynamically metastable marginal transition metal atoms, the oxygen-vacancy-rich TiO2 nanoparticles (NPs) in situ grown on the Ti3C2Tx nanosheets (TiO2/Ti3C2Tx) are prepared via a one-step ethanolthermal treatment of the Ti3C2Tx MXene. The oxygen vacancies act as the main active sites for the NH3 synthesis. The highly conductive interior untreated Ti3C2Tx nanosheets could not only facilitate the electron transport but also avoid the self-aggregation of the TiO2 NPs. Meanwhile, the TiO2 NPs generation could enhance the SSA of the Ti3C2Tx in return. Accordingly, the as-prepared electrocatalyst exhibits an NH3 yield of 32.17 mu g h(-1) mg(-1) cat. at -0.55 V versus reversible hydrogen electrode (RHE) and a remarkable Faradaic efficiency of 16.07% at -0.45 V versus RHE in 0.1 m HCl, placing it as one of the most promising NRR electrocatalysts. Moreover, the density functional theory calculations confirm the lowest NRR energy barrier (0.40 eV) of TiO2 (101)/Ti3C2Tx compared with Ti3C2Tx or TiO2 (101) alone.
Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

Lili Han,Xijun Liu,Jinping Chen,Ruoqian Lin,Haoxuan Liu,Fang Lü,Seongmin Bak,Zhixiu Liang,Shunzheng Zhao,Eli Stavitski,Jun Luo,Radoslav R. Adzic,Huolin L. Xin

DOI: https://doi.org/10.1002/ange.201811728

2019-01-01

Angewandte Chemie

Abstract:NH 3 synthesis by the electrocatalytic N 2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH 3 yield rate (34.0±3.6 μg h −1 mg cat. −1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.
Charge transfer and orbital reconstruction of non-noble transition metal single-atoms anchored on Ti2CTx-MXenes for highly selective CO2 electrochemical reduction

Neng Li,Jiahe Peng,Zuhao Shi,Peng Zhang,Xin Li

DOI: https://doi.org/10.1016/s1872-2067(21)64018-4

IF: 16.5

2022-07-01

Chinese Journal of Catalysis

Abstract:Inspired by MXene nanosheets and their regulation of surface functional groups, a series of Ti2C-based single-atom electrocatalysts (TM@Ti2CT x , TM = V, Cr, Mn, Fe, Co, and Ni) with two different functional groups (T = –O and –S) was designed. The CO2RR catalytic performance was studied using well-defined ab initio calculations. Our results show that the CO2 molecule can be more readily activated on TM @Ti2CO2 than the TM@Ti2CS2 surface. Bader charge analysis reveals that the Ti2CO2 substrate is involved in the adsorption reaction, and enough electrons are injected into the 2π*u orbital of CO2, leading to a V-shaped CO2 molecular configuration and partial negative charge distribution. The V-shaped CO2 further reduces the difficulty of the first hydrogenation reaction step. The calculated ΔG of the first hydrogenation reaction on TM@Ti2CO2 was significantly lower than that of the TM@Ti2CS2 counterpart. However, the subsequent CO2 reduction pathways show that the U L of the potential determining step on TM@Ti2CS2 is smaller than that of TM@Ti2CO2. Combining the advantages of both TM@Ti2CS2 and TM@Ti2CO2, we designed a mixed functional group surface with –O and –S to anchor TM atoms. The results show that Cr atoms anchored on the surface of mixed functional groups exhibit high catalytic activity for the selective production of CH4. This study opens an exciting new avenue for the rational design of highly selective MXene-based single-atom CO2RR electrocatalysts.

chemistry, physical,engineering, chemical, applied
MoO3 Nanosheets for Efficient Electrocatalytic N2 Fixation to NH3

Guanwei Cui

DOI: https://doi.org/10.1039/c8ta03974g

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:The synthesis of NH3 heavily depends on the energy-intensive Haber-Bosch process with a large amount of greenhouse gas emission. Electrochemical reduction offers a carbon-neutral process to convert N-2 to NH3 at ambient conditions, but requires efficient and stable catalysts for the N-2 reduction reaction. Mo-dependent nitrogenases and synthetic molecular complexes have attracted increasing attention for N-2 fixation; however, less attention has been paid to Mo-based nanocatalysts for electrochemical N-2 conversion to NH3. Herein, we report that MoO3 nanosheets act as an efficient non-noble-metal catalyst for electrochemical N-2 fixation to NH3 with excellent selectivity at room temperature and atmospheric pressure. In 0.1 M HCl, this catalyst exhibits remarkable NRR activity with an NH3 yield of 4.80 x 10(-10) mol s(-1) cm(-2) (29.43 g h(-1) mg(cat.)(-1)) and a faradaic efficiency of 1.9%. Moreover, this catalyst also shows high electrochemical stability and durability. Density functional theory calculations reveal that the outermost Mo atoms serve as the active sites for effective N-2 adsorption.
Synergistic Effect of Surface Terminated Oxygen Vacancy and Single Atom Catalysts on Defective MXenes for Efficient Nitrogen Fixation.

Shaobin Tang,Tianyong Liu,Qian Dang,Xunhui Zhou,Xiao-Kang Li,Tongtong Yang,Yi Luo,Edward Sharman,Jun Jiang

DOI: https://doi.org/10.1021/acs.jpclett.0c01415

2020-01-01

Abstract:The production of ammonia (NH3) from molecular dinitrogen (N-2) under ambient conditions is of great significance but remains as a great challenge. Using first-principles calculations, we have investigated the potential of using a transition metal (TM) atom embedded on defective MXene nanosheets (Ti3-xC2Oy and Ti2-xC2Oy with a Ti vacancy) as a single-atom electrocatalyst (SAC) for the nitrogen reduction reaction (NRR). The Ti3-xC2Oy nanosheet with Mo and W embedded, and the Ti2-xC2Oy, nanosheet with Cr, Mo, and W embedded, can significantly promote the NRR while suppressing the competitive hydrogen evolution reaction, with the low limiting potential of -0.11 V for W/Ti2-xC2Oy. The outstanding performance is attributed to the synergistic effect of the exposed Ti atom and the TM atom around an extra oxygen vacancy. The polarization charges of the active center are reasonably tuned by the embedded TM atoms, which can optimize the binding strength of key intermediate *N2H. The good feasibility of preparing such TM SACs on defective MXenes and the high NRR selectivity with regard to the competitive HER suggest new opportunities for driving NH3 production by MXene-based SAC electrocatalysts under ambient conditions.

Single Molybdenum Atom Anchored on 2D Ti2NO2 MXene As a Promising Electrocatalyst for N2 Fixation.

Enhancing N2Fixation Activity by Converting Ti3C2MXenes Nanosheets to Nanoribbons

Atomic Modulation and Phase Engineering of MoS2 2 for Boosting N2 2 Reduction

Atomic Modulation and Phase Engineering of MoS2 for Boosting N2 Reduction

The synergy between oxidized molybdenum and covalent triazine frameworks for electrocatalytic nitrogen fixation

Unveiling the Underlying Mechanism of Transition Metal Atoms Anchored Square Tetracyanoquinodimethane Monolayers as Electrocatalysts for N 2 Fixation

Single Faceted Two-Dimensional Mo2C Electrocatalyst for Highly Efficient Nitrogen Fixation

Anchoring Ultra-Small Molybdenum Oxide Species on Covalent Triazine Frameworks for Efficient Electrochemical Nitrogen Fixation

Au Sub-Nanoclusters on TiO 2 toward Highly Efficient and Selective Electrocatalyst for N 2 Conversion to NH 3 at Ambient Conditions.

Efficient Electrocatalytic N2 Fixation with MXene under Ambient Conditions

Interface Catalysis of Nickel Molybdenum (NiMo) Alloys on Two-Dimensional (2D) MXene for Enhanced Hydrogen Electrochemistry

1 T-phase molybdenum sulfide nanodots enable efficient electrocatalytic nitrogen fixation under ambient conditions

Molybdenum Carbide Nanodots Enable Efficient Electrocatalytic Nitrogen Fixation under Ambient Conditions

High-Throughput Screening of Nitrogen Reduction Reaction on Single Atom@1T'-MoS 2

Fabrication of nickel nanoparticles anchored on a 2D double transition metal MXene for efficient hydrogen and oxygen evolution reactions

Ambient Electrochemical Nitrogen Fixation over a Bifunctional Mo-(O-C-2)(4) Site Catalyst

High-Performance Electrocatalytic Conversion of N-2 to NH3 Using Oxygen-Vacancy-Rich TiO2 in Situ Grown on Ti3C2Tx MXene

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

Charge transfer and orbital reconstruction of non-noble transition metal single-atoms anchored on Ti2CTx-MXenes for highly selective CO2 electrochemical reduction

MoO3 Nanosheets for Efficient Electrocatalytic N2 Fixation to NH3

Synergistic Effect of Surface Terminated Oxygen Vacancy and Single Atom Catalysts on Defective MXenes for Efficient Nitrogen Fixation.