Abstract:In this work, tannic acid (TA)-functionalized carbon nanotubes () were synthesized by hydrogen bond and π–π stacking interactions. embedded with silver nanoparticles () was obtained by in situ reducing silver ammonia ions in the pore channels of and were added into the polyamide (PA) layer by interfacial polymerization to fabricate high-performance nanocomposite reverse osmosis membranes. The results show that the functionalized CNTs can be uniformly distributed in the PA matrix with random orientations. A loose PA separation layer was obtained by introducing Correspondingly, abundant new water channels were formed. Compared with the pure PA membrane, the water permeability (4.81 L m–2 h–1 bar–1) of the nanocomposite membrane is enhanced by 49.8% without any loss in NaCl rejection (99.3%). The membrane exhibits satisfactory chemical- and bio-fouling resistances to bovine serum albumin and Escherichia coli as model foulants. The high bactericidal rate should be ascribed to the formation of the TA coating and confined Ag nanoparticles in CNT channels. The confined structure effectively avoids the leaching out of the Ag nanoparticles and keeps the persistence of the antibacterial property. The excellent compatibility between the CNTs and the polyamide matrix endows the membrane with long-term performance stability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c03313.Experimental procedure of the antibacterial property of the membranes; optical photographs of the uncoated CNT, , and samples dispersed in deionized water; EDX spectrum of the sample; three-dimensional AFM and SEM images of the fabricated various membranes; permeate fluxes and salt rejections of the PA/ membranes with different amounts of the incorporated in 2% MPD solution; formed bacterial colonies by 24 h growth on the agar culture medium after E. coli suspension contacting with the fabricated various membranes; arithmetic average value (Ra) and root-mean-square value (Rq) of the membrane surface roughness from AFM measurements; flux decline rate (Fdr), flux recovery rate (Frr), and irreversible decline rate (Firr) in each fouling cycle for the fabricated PA-based membranes using 100 mg/L BSA as a foulant solution; resistance values from the concentration polarization (rcp) and the reversible (rrf) and irreversible (rif) fouling resistance values of the fabricated PA-based membranes, respectively, using 100 mg/L BSA and 10 mg/L HA as foulant solutions (PDF)This article has not yet been cited by other publications.

Palygorskite/silver nanoparticles incorporated polyamide thin film nanocomposite membranes with enhanced water permeating, antifouling and antimicrobial performance.

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

In-situ Complexation of Silver Nanoparticle on Thin Film Composite Reverse Osmosis Membrane for Improving Desalination and Anti-Biofouling Performance

Impact of Graphitic Carbon Nitride/polydopamine on Permeance and Antifouling Performance of Reverse Osmosis Membranes

Organo-Functionalization: An Effective Method in Enhancing the Separation and Antifouling Performance of Thin-Film Nanocomposite Membranes by Improving the Uniform Dispersion of Palygorskite Nanoparticles

Incorporation of Silver-Embedded Carbon Nanotubes Coated with Tannic Acid into Polyamide Reverse Osmosis Membranes toward High Permeability, Antifouling, and Antibacterial Properties

Immobilization of Silver in Polypropylene Membrane for Anti-Biofouling Performance

Engineering of Ag-nanoparticle-encapsulated intermediate layer by tannic acid-inspired chemistry towards thin film nanocomposite membranes of superior antibiofouling property

Facile Modification of Thin-Film Composite Nanofiltration Membrane with Silver Nanoparticles for Anti-Biofouling

Ag nanoparticles decorated PVA-<i>co</i>-PE nanofiber-based membrane with antifouling surface for highly efficient inactivation and interception of bacteria

A Readily Accessible Functional Nanofibrous Membrane for High‐Capacity Immobilization of Ag Nanoparticles and Ultrafast Catalysis Application

Incorporation of oleic acid-modified Ag@ZnO core-shell nanoparticles into thin film composite membranes for enhanced antifouling and antibacterial properties

A sulfonated polymer membrane with Ag-based graft: morphology, characterization, antimicrobial activity and interception ability

Optimizing Polyamide Thin Film Composite Membrane Covalently Bonded with Modified Mesoporous Silica Nanoparticles

Engineering polyamide nanofiltration membrane with bifunctional terpolymer brushes for antifouling and antimicrobial properties

In Situ Formation of Silver Nanoparticles Induced by Cl-Doped Carbon Quantum Dots for Enhanced Separation and Antibacterial Performance of Nanofiltration Membrane

Engineering Dual-Reinforced Antibacterial and Anti-Fouling Ultrafiltration Membrane by In-Situ Synthesising Super-Dispersion and High-Activity Silver Nanoparticles (Agnps)

Tannic Acid Coating and in Situ Deposition of Silver Nanoparticles to Improve the Antifouling Properties of an Ultrafiltration Membrane

Antimicrobial Thin-Film Composite Polyamide Nanofiltration Membrane with High Desalination and Flux Performance Manufactured Through a Novel UV Light Driven Photoreduction Method That Generates Dispersed Silver Nanoparticles

Substrate-Independent, Regenerable Anti-Biofouling Coating for Polymeric Membranes